WYLIE QIANLI iCopy Plus 2.2 EEPROM Programmer User Manual

1. Introduction

The WYLIE QIANLI iCopy Plus 2.2 is a versatile EEPROM programmer designed for professional iPhone repair and maintenance. This device facilitates the transfer and repair of data related to LCD screens, vibrators, and batteries across various iPhone models, including True Tone recovery functions. It is an essential tool for technicians performing component replacements and data restoration.

Key Features

• Vibrator identification codes read & write.
• Touch codes and Light sense function reinstating.
• True Tone display reinstating & Chips read/write (jump wire required for some functions).
• Battery data modification (efficiency, cycle life, service serial number).
• Backup and restore battery data.
• Support for iPhone 7/8/X/XR/XS/XSMAX/11/12/13 Pro/13Pro Max series.
• Multi-language support: Chinese, English, Spanish.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your vendor.

Image: The QIANLI iCopy Plus 2.2 device shown with included accessories such as repair boards, solder paste scraper, thermal pads, ESD gloves, fly wire, and screen opener.

• 1x QIANLI iCopy Plus 2.2 Main Unit
• 1x LCD Testing Board
• 1x Battery Testing Board
• 1x Vibrator Transfer Board
• 1x WYLIE WL-5A Solder Paste Scraper
• 1x Pack of WYLIE 5PCS High Temperature Resistance Thermal Pads
• 1x Pair of WYLIE ESD BGA Repairing Soldering Anti-static Carbon Fiber Gloves
• 1x WYLIE Dot Repairing Solder Lug
• 1x WYLIE WL-002 Superfine Silver Jump Wire (0.02MM)
• 1x WYLIE K1 Blade Durable Screen Opener

3. Setup

3.1 Device Overview

Image: The QIANLI iCopy Plus 2.2 main unit displayed alongside the LCD, Battery, and Vibrator connector boards.

The iCopy Plus 2.2 main unit features a display screen, three control buttons (ON/OFF, Read, Write), and dedicated slots for connecting various function boards. Ensure the device is placed on a stable, clean, and anti-static work surface.

3.2 Initial Power On

1. Press and hold the 'ON/OFF' button located on the left side of the device until the screen illuminates.
2. The device will boot up and display the main interface.

3.3 Language Selection

To switch the display language between Chinese, English, and Spanish:

• From the main interface, locate the 'Double-click Switching English' prompt.
• Double-click the indicated button (usually the 'Read' button or a specific navigation button) to cycle through the available languages.

4. Operation

4.1 General Interface Navigation

Image: The iCopy Plus 2.2 main unit displaying the model selection interface, with options for various iPhone models.

The main interface allows selection of iPhone models and functions. Use the navigation buttons to select the desired model (e.g., 7/7P/X, 11Pro, 13PM) and then proceed to the specific function.

4.2 LCD/Vibrator Transfer (EEPROM Programmer)

This function allows reading and writing of data for LCD screens and vibrators, essential for restoring original functionality after component replacement.

Image: The iCopy Plus 2.2 with the vibrator/light sensor connector board securely attached, ready for operation.

1. Connect the Board: Attach the appropriate LCD or Vibrator transfer board to the main unit's connector slot. Ensure it is securely seated.
2. Connect Component: Connect the original or new LCD/vibrator component to the transfer board.
3. Read Data: Press the 'Read' button. The device will read the data from the connected component.
4. Write Data: After reading, connect the target component (if different) and press the 'Write' button to transfer the data.

4.3 Battery Repair and Data Transfer

The iCopy Plus 2.2 can modify battery data, clear cycle life, and backup/restore battery information.

1. Connect Battery Board: Attach the Battery Testing Board to the main unit.
2. Connect Battery: Connect the iPhone battery to the battery board.
3. Read Battery Data: Press 'Read' to display current battery information (temperature, voltage, current, manufacturer number, manufacture date, cycle life, efficiency).
4. Modify/Clear Data: Navigate through the menu to select options for modifying battery efficiency, clearing cycle life, or changing the service serial number. Confirm changes as prompted.
5. Backup/Restore: Use the appropriate menu options to backup current battery data or restore previously saved data.

4.4 True Tone Recovery

True Tone display recovery is possible even without the original LCD in certain conditions. This process often requires connecting the device to a PC with specific software.

Image: The iCopy Plus 2.2 connected via USB to a computer, displaying the QIANLI repair software interface for True Tone recovery.

1. PC Connection: Connect the iCopy Plus 2.2 to a computer using a USB cable.
2. Software Installation: Ensure the QIANLI PC software is installed and running.
3. Data Transfer: Use the PC software to read and write LCD data, enabling True Tone recovery. Note that True Tone recovery without the original LCD requires the original Front Camera (for models before iPhone 8) or original Ear Speaker (for models after iPhone X).

5. Maintenance

5.1 General Care

• Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures or humidity. The upper temperature rating is 35 degrees Celsius.
• Store the device and its boards in a protective case when not in use to prevent damage.

5.2 Battery Care

• Charge the device regularly to maintain optimal battery health.
• Avoid fully discharging the battery frequently.
• If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.

6. Troubleshooting

• English Text Errors: The latest firmware version 2.2 addresses and fixes English text errors/bugs in the main interface. Ensure your device is updated.
• Battery Data Read Restriction: Version 2.2 removes the restriction that battery data can only be read with a flex cable, allowing direct reading.
• Screen Darkening After USB Insert: Version 2.2 fixes the bug where the screen darkened after inserting USB and brightness did not return to normal.
• Device Not Responding: Try restarting the device by holding the 'ON/OFF' button. If unresponsive, ensure it is charged.
• Data Read/Write Failure: Verify that the correct function board is securely connected and that the component (LCD, vibrator, battery) is properly attached. Ensure the iPhone model selected on the device matches the component.
• PC Software Connection Issues: Ensure USB drivers are correctly installed on your computer. Try a different USB port or cable.

7. Specifications

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your original point of purchase or the manufacturer directly. Keep your proof of purchase for warranty validation.