1. Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Fenge 23.6 Inch Monitor Stand. Please read this manual thoroughly before use to ensure proper setup and to maximize the benefits of the product.
Image 1: Fenge 23.6 Inch Monitor Stand in a typical desk setup.
The Fenge Monitor Stand is designed to elevate your monitor to an ergonomic viewing height, reducing neck and shoulder strain. It also offers integrated storage solutions and cable management features to help maintain an organized workspace.
2. Important Safety Information
- Ensure all components are securely fastened before placing any items on the stand.
- Do not exceed the maximum load capacity of 66 lbs (30 kg).
- Keep small parts away from children to prevent choking hazards.
- Avoid exposing the stand to excessive moisture or direct sunlight.
- Place the stand on a stable, level surface to prevent tipping.
3. Package Contents
Verify that all the following components are included in your package:
- Top Panel (1x)
- Bottom Shelf (1x)
- Aluminum Feet (4x)
- Rubber Pads (4x)
- Assembly Hardware (Screws, Allen Wrench)
- Instruction Manual (This document)
Image 2: Components of the Fenge Monitor Stand, highlighting the MDF panel and aluminum feet.
4. Assembly Instructions
Assembly typically takes 5-8 minutes. Follow these steps:
- Attach the Aluminum Feet: Securely fasten the four aluminum feet to the underside of the top panel using the provided screws and Allen wrench. Ensure they are tightly secured for stability.
- Install the Bottom Shelf: Slide the bottom shelf into the designated slots on the aluminum feet. The shelf should fit snugly.
- Apply Rubber Pads: Attach the four rubber pads to the bottom of the aluminum feet. These pads prevent scratching your desktop and enhance stability.
- Final Check: Verify that all connections are secure and the stand is stable before placing your monitor or other items on it.
Video 1: This video demonstrates the assembly process and highlights the functional design of the Fenge monitor stand.
5. Usage and Features
5.1 Ergonomic Design
The Fenge Monitor Stand elevates your screen by 5.7 inches, promoting a comfortable viewing angle and helping to prevent neck and shoulder discomfort during prolonged use.
Image 3: Visual representation of ergonomic benefits, including desktop organization, monitor elevation, and cervical spine health.
5.2 2-Tier Desktop Organizer
The stand features a two-tier design with high-capacity compartments, allowing you to store office accessories, notebooks, and other supplies, keeping your desktop tidy and clutter-free.
Image 4: Detailed view of the storage compartments, ideal for organizing desk essentials.
5.3 Cable Management
Integrated cable management slots help route and organize your cords, preventing tangles and maintaining a clean aesthetic.
Image 5: Illustration of the cable management system, keeping cords organized and out of sight.
5.4 Phone/Tablet Slot
A dedicated slot is provided for holding your smartphone or tablet, keeping it upright and easily accessible while you work.
Image 6: The monitor stand featuring its M-type stable structure, phone/tablet slot, and cable management trough.
Video 2: This video showcases the Fenge monitor stand in various desk setups, demonstrating its organizational capabilities and aesthetic appeal.
6. Care and Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Dusting: Regularly dust the surface with a dry, lint-free cloth.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
7. Troubleshooting
- Stand is Wobbly:
- Ensure all screws are tightened.
- Verify the stand is placed on a flat, stable surface.
- Check that the rubber pads are correctly installed on all four feet.
- Difficulty Assembling:
- Refer to Section 4: Assembly Instructions and review the steps carefully.
- Ensure you are using the correct hardware for each step.
- If issues persist, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Fenge |
| Model | 23.6 Inch Monitor Stand |
| Material | Engineered Wood (MDF) |
| Color | White |
| Product Dimensions (L x W x H) | 23.6 x 11 x 5.7 inches |
| Item Weight | 11 pounds (5 kg) |
| Load Capacity | 66 pounds (30 kg) |
| Assembly Required | Yes |
| Finish Type | Lacquered |
| UPC | 694743169188 |
Image 7: Technical drawing showing the dimensions and load capacity of the monitor stand.
9. Warranty and Support
For warranty information or customer support, please refer to the product packaging or contact Fenge customer service directly. Keep your purchase receipt for any warranty claims.
