1. Introduction
Thank you for purchasing the AGV LIGHTING CL025 Crystal Semi-Flush Mount Ceiling Light Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image 1.1: The AGV LIGHTING CL025 Crystal Semi-Flush Mount Ceiling Light Fixture. This image shows the fixture unlit, highlighting its matte black and shine gold finish with clear K9 crystals.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not expose to water or moisture.
- Use only E12 base bulbs, maximum 60W per bulb. Do not exceed the recommended wattage.
- Handle crystal components with care to prevent breakage. It is recommended to wear gloves during crystal installation to avoid fingerprints.
- Ensure the mounting surface can support the weight of the fixture.
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact AGV LIGHTING customer support.
- Fixture Body (with integrated wiring)
- Mounting Bracket
- Crystal Shade Components
- Decorative Crystal Drop
- Mounting Hardware (screws, wire nuts)
- Instruction Manual
- White Gloves (for crystal handling)
4. Specifications
| Brand | AGV LIGHTING |
| Model Number | CL025 |
| Product Dimensions | 12"L x 12"W x 13"H (31cm x 31cm x 33cm) |
| Material | Alloy Steel, K9 Crystal |
| Finish Type | Matte Black & Shine Gold |
| Installation Type | Semi Flush Mount |
| Number of Lights | 4 |
| Bulb Base | E12 |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120 Volts |
| Special Feature | Dimmable (with compatible bulbs and dimmer switch) |
| Item Weight | 6.93 pounds |
Image 4.1: Detailed dimensions of the CL025 fixture, showing a diameter of 12 inches (31cm) and a height of 13 inches (33cm).
5. Setup and Installation
Important: Before starting, ensure the power is turned off at the circuit breaker. If you are unsure about electrical wiring, consult a qualified electrician.
- Prepare for Installation: Turn off the main power supply to the junction box at the circuit breaker. Clear the work area and gather all necessary tools (screwdriver, wire strippers, electrical tape, etc.).
- Attach Mounting Bracket: Secure the mounting bracket to the ceiling junction box using the screws provided. Ensure the bracket is firmly attached and level.
- Wire the Fixture: Carefully connect the fixture's wires to the corresponding wires from the junction box.
- Connect the black (live) wire from the fixture to the black (live) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box.
- Mount the Fixture Body: Carefully lift the fixture body and align the mounting holes with the screws on the mounting bracket. Secure the fixture to the bracket using the provided nuts or screws.
- Install Bulbs: Screw four E12 base bulbs (not included, max 60W each) into the sockets.
- Attach Crystal Components: Wearing the provided white gloves, carefully attach the crystal shade components to the fixture body according to the diagram (if provided) or by hooking them onto the designated loops. Finally, attach the decorative crystal drop to the bottom of the fixture.
Image 5.1: A close-up view illustrating the clear K9 crystal components and the E12 bulb base, showing where bulbs are inserted.
Image 5.2: A detailed view of the fixture's construction, showing the matte black frame, gold accents, and the arrangement for crystal attachment.
6. Operating Instructions
Once the fixture is securely installed and bulbs are in place, restore power at the circuit breaker. The light fixture can then be operated using your standard wall switch.
- On/Off Function: Use the wall switch connected to the fixture to turn the lights on or off.
- Dimming Function: This fixture is dimmable. To utilize the dimming feature, you must use dimmable E12 bulbs and a compatible dimmer switch (both sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
Image 6.1: The AGV LIGHTING CL025 fixture illuminated, showcasing the light dispersion and crystal sparkle.
7. Maintenance
Regular maintenance will help preserve the appearance and functionality of your light fixture.
- Cleaning: Ensure the power is off before cleaning. For the metal frame, wipe with a soft, dry cloth. For the crystal components, use a soft, damp cloth with a mild glass cleaner, or a specialized crystal cleaner. Avoid abrasive cleaners or harsh chemicals that may damage the finish or crystals.
- Bulb Replacement: Always turn off the power before replacing bulbs. Allow old bulbs to cool before removing. Replace with E12 base bulbs, ensuring the wattage does not exceed 60W per bulb.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
8. Troubleshooting
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty bulb. | Check circuit breaker and wall switch. Ensure all wire connections are secure (power off first). Replace bulb with a new one. |
| Light flickers. | Loose bulb. Incorrect bulb type for dimmer. Faulty dimmer switch. | Tighten bulb. Ensure dimmable bulbs are used with a dimmer switch. Consult an electrician to check or replace the dimmer switch. |
| Dimming does not work. | Non-dimmable bulbs. Incompatible dimmer switch. | Use only dimmable E12 bulbs. Ensure the dimmer switch is compatible with LED or incandescent bulbs, depending on your bulb type. |
If these steps do not resolve the issue, please contact AGV LIGHTING customer support.
9. Warranty and Support
For warranty information or technical assistance, please contact AGV LIGHTING customer support through the retailer where the product was purchased or visit the official AGV LIGHTING website. Please have your model number (CL025) and purchase date available when contacting support.
AGV LIGHTING
Brighten Your Style
