1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your GLOBE Electric Patrick 19-inch 3-Light Dimmable LED Integrated Track Lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Image 1.1: The GLOBE Electric Patrick 3-Light Track Lighting fixture in matte black.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections comply with local codes and ordinances.
- Do not install this fixture in wet locations. For indoor use only.
- Handle the fixture with care to avoid damage to the LED components.
- Do not attempt to modify the fixture or its components.
- Wear safety glasses and gloves during installation.
3. Package Contents
Verify that all components are present before beginning installation:
- LED Integrated Track Light Fixture (1)
- Mounting Hardware (screws, wire nuts, mounting bracket)
- Instruction Sheet (this document)
4. Setup and Installation
This fixture is designed for ceiling mount, hardwired installation. Assembly is required.
4.1 Tools Required (Not Included)
- Screwdriver (Phillips and/or Flathead)
- Wire Strippers
- Electrical Tape
- Drill (if new mounting holes are required)
- Ladder
4.2 Installation Steps
- Turn off power: Locate the circuit breaker controlling the light fixture and turn it off. Verify power is off using a voltage tester.
- Remove existing fixture: Carefully remove any existing light fixture, noting the wiring connections.
- Attach mounting bracket: Secure the provided mounting bracket to the junction box in the ceiling using the screws.
- Make electrical connections: Connect the fixture's wires to the household wiring:
- Black (Live) to Black (Live)
- White (Neutral) to White (Neutral)
- Green or Bare Copper (Ground) to Green or Bare Copper (Ground)
- Mount the fixture: Carefully tuck the wires into the junction box and align the fixture with the mounting bracket. Secure the fixture to the bracket using the provided screws.
- Restore power: Turn the power back on at the circuit breaker.

Image 4.1: Product dimensions for installation planning. The fixture measures 19 inches (48.2 cm) in length, 7.1 inches (18 cm) in height, and 3 inches (7.68 cm) in depth for each light head.
5. Operating Instructions
The GLOBE Electric Patrick track lighting fixture features integrated LED lights and pivoting track heads for adjustable illumination.
5.1 Adjusting Light Direction
Each of the three light heads can be manually pivoted to direct light where needed. Gently grasp the light head and rotate it to the desired angle. Avoid excessive force to prevent damage.

Image 5.1: Detail of a pivoting track head, illustrating its adjustable movement.
5.2 Dimmable Functionality
This fixture is fully dimmable when connected to a compatible dimmer switch (sold separately). Ensure the dimmer switch is rated for LED lighting to prevent flickering or damage.
6. Maintenance
This LED integrated fixture is designed for long-lasting performance with minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or LED components.
- LED Replacement: The LED lights are integrated and non-replaceable. The fixture is designed for the lifespan of the integrated LEDs.
7. Troubleshooting
If you experience issues with your track lighting fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up | No power to the fixture; Loose wiring connection; Faulty switch | Check circuit breaker; Verify all wire connections are secure; Test or replace switch. |
| Lights flicker or dim incorrectly | Incompatible dimmer switch; Loose wiring | Ensure dimmer is LED compatible; Check wiring connections. |
| Buzzing sound from fixture | Incompatible dimmer switch; Loose wiring | Replace with a high-quality, LED-compatible dimmer; Verify secure wiring. |
If the problem persists after attempting these solutions, contact customer support.
8. Specifications
Detailed technical specifications for the GLOBE Electric Patrick Track Lighting fixture:
| Feature | Specification |
|---|---|
| Model Number | 64000007 |
| Brand | GLOBE Electric |
| Color | Matte Black |
| Material | Metal |
| Product Dimensions | 3"L x 19"W x 7.1"H (7.62cm L x 48.26cm W x 18.03cm H) |
| Installation Type | Ceiling Mount, Hardwired |
| Light Source Type | Integrated LED |
| Wattage | 22.5 Watts (Total) |
| Brightness | 1200 Lumens (Total) |
| Color Temperature | 2700 Kelvin (Warm White) |
| CRI (Color Rendering Index) | 90 |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible dimmer switch) |
| Number of Light Sources | 3 |
| Shade Material | Plastic (Frosted Diffuser) |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 1.83 Pounds (0.83 kg) |
9. Warranty and Support
This product is sold without an explicit manufacturer's warranty. For technical assistance or inquiries regarding your GLOBE Electric product, please refer to the contact information provided with your purchase or visit the official GLOBE Electric website for support resources.





