Retro Fighters Brawler64 Wireless Nintendo Switch Controller

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Retro Fighters Brawler64 Wireless Controller for Nintendo Switch. Designed for optimal performance with Nintendo Switch Online N64 games and general Nintendo Switch titles, this controller combines classic feel with modern wireless technology.

2. Package Contents

• Retro Fighters Brawler64 Wireless Controller (Blue)
• USB-C Charging Cable
• User Manual (this document)

3. Controller Layout

Familiarize yourself with the buttons and features of your Brawler64 controller:

Front view of the Retro Fighters Brawler64 Wireless Nintendo Switch Controller in blue, showcasing the analog stick, D-pad, C-buttons, A/B buttons, Start, Home, Screenshot, and Minus buttons.

Side view of the Retro Fighters Brawler64 Wireless Nintendo Switch Controller in blue, highlighting the ergonomic grip and shoulder buttons.

• Analog Stick: For precise movement and camera control.
• D-Pad: Directional input.
• A/B Buttons: Primary action buttons.
• C-Buttons (Yellow): Context-sensitive actions, often camera control in N64 games.
• Start Button (Red): Pause or menu access.
• Home Button: Returns to the Nintendo Switch HOME Menu.
• Screenshot Button: Captures screenshots.
• Minus (-) Button: Functions as the 'Select' button in some games or for system menus.
• Shoulder Buttons (L/R): Additional action buttons.
• Trigger Buttons (ZL/ZR): Analog-like input for specific actions.
• USB-C Port: For charging the controller.
• LED Indicators: Display connection status and battery level.

4. Setup

4.1 Charging the Controller

Before first use, fully charge the controller. Connect the supplied USB-C cable to the controller's USB-C port and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter, or computer USB port). The LED indicators will show charging status and turn off when fully charged.

4.2 Pairing with Nintendo Switch

1. Ensure your Nintendo Switch console is powered on and updated to the latest system software.
2. From the HOME Menu, select 'Controllers' > 'Change Grip/Order'.
3. On the Brawler64 controller, press and hold the SYNC Button (usually a small button on the top edge or back) for a few seconds until the LED indicators begin to flash rapidly.
4. Once the controller appears on the Switch screen and the LEDs stop flashing, indicating a successful connection, press the L+R buttons on the controller as prompted by the Switch.
5. The controller is now paired and ready for use.

The Brawler64 controller supports two modes: N64 Mode (for Nintendo Switch Online N64 games) and Pro Controller Mode (for general Nintendo Switch games). The controller automatically detects the appropriate mode when connected to the Switch. If issues arise, ensure your Switch is updated and try re-pairing.

5. Operating Instructions

5.1 Power On/Off

• To Power On: Press the Home Button. The controller will attempt to connect to the last paired Switch.
• To Power Off: If the controller is idle for a period, it will automatically power off to conserve battery. You can also manually power it off by holding the Home Button for approximately 5 seconds until the LEDs turn off.

5.2 Motion Controls and Vibration Feedback

The Brawler64 controller includes a motion sensor and dual vibration feedback. These features are automatically enabled when supported by the game. Experience immersive gameplay with responsive motion controls and tactile rumble effects.

6. Maintenance

6.1 Cleaning

To clean your controller, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the controller's finish and internal components.

6.2 Storage

Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the controller is fully charged before storage to maintain battery health.

7. Troubleshooting

• Controller not pairing: Ensure the controller is charged. Try re-pairing by following the steps in Section 4.2. Make sure no other Bluetooth devices are interfering.
• Input lag or disconnection: Ensure you are within the wireless range (30+ feet). Check for potential interference from other wireless devices.
• Buttons not responding: Ensure the controller is charged. If specific buttons are unresponsive, contact customer support.
• Charging issues: Try a different USB-C cable or power source. Ensure the cable is securely connected.
• Firmware Update: Periodically check the Retro Fighters official website for any available firmware updates for your controller, which may resolve performance issues or add new features.

8. Specifications

9. Warranty and Support

Retro Fighters products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Retro Fighters website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Retro Fighters customer service through their official website or the retailer where the product was purchased.

Online Resources:

• Retro Fighters Official Website: www.retrofighters.com