1. Introduction
The Pride Mobility Jazzy Select Group 2 Power Chair is designed to provide enhanced mobility and independence. This power chair features Active-Trac Suspension for a smooth ride, powerful dual motors for performance, and mid-wheel drive for excellent maneuverability. This manual provides essential information for the safe and effective use of your power chair.
Figure 1: Front view of the Pride Mobility Jazzy Select Group 2 Power Chair in red.
2. Safety Information
Your Jazzy Select Group 2 Power Chair is an FDA Class II Medical Device, designed to assist individuals with mobility impairments. Always operate the power chair with caution and adhere to all safety guidelines provided in this manual. Ensure the power chair is turned off before making any adjustments or performing maintenance.
- Always use the seatbelt provided for your safety.
- Avoid operating the power chair on excessively steep inclines or declines.
- Do not operate the power chair under the influence of alcohol or medication that may impair your judgment.
- Ensure all wheels are properly inflated (if applicable) and in good condition before use.
- Be aware of your surroundings and avoid sudden movements, especially in crowded areas.
3. Setup and Adjustments
3.1. Initial Assembly and Charging
Upon receiving your power chair, ensure all components are present. The power chair uses two 12-volt sealed lead-acid (SLA) batteries. Before first use, fully charge the batteries using the provided charger. The charger has indicator lights for power and charging status (Red ON for fast charge, Green Flashing for float/maintenance charge, Green ON-Steady when fully charged).
Figure 2: Side view of the power chair, highlighting its compact design.
3.2. Seat and Armrest Adjustments
The high-back seat is depth-adjustable and can recline slightly for personalized comfort. Armrests can be adjusted for height and width. Refer to the detailed owner's manual for specific instructions on loosening bolts and repositioning components to achieve your desired settings.
3.3. Foot Platform Adjustment
The flip-up foot platform can be adjusted for angle and height to ensure proper leg positioning and comfort during use. This platform can also be folded up to facilitate transfers.
4. Operating Instructions
4.1. Controller Overview
The intuitive controller features a joystick for directional control, a power button, and a speed adjustment dial. Battery life indicators (green, yellow, red LEDs) are also present on the controller. Always ensure the power chair is turned on before attempting to move.
4.2. Driving the Power Chair
To move, gently push the joystick in the desired direction. The mid-wheel drive system provides a tight turning radius of 23.76 inches, allowing for excellent maneuverability in confined spaces. The power chair features electronic braking that engages automatically when the joystick is released, ensuring a smooth stop. Start at a low speed setting until you are comfortable with the controls, especially when operating indoors.
4.3. Speed Control
The speed adjustment dial allows you to set the maximum speed of the power chair, up to 4.3 MPH. Adjust the speed according to your environment and comfort level.
5. Maintenance
5.1. Battery Care
Regularly charge the batteries to maintain optimal performance and extend their lifespan. It is recommended to charge the batteries daily, especially after extensive use. The charger includes a float/maintenance charge mode to prevent overcharging.
5.2. General Cleaning and Inspection
Keep your power chair clean by wiping it down with a damp cloth. Regularly inspect the tires, foot platform, and armrests for any signs of wear or damage. Ensure all fasteners are secure. If any issues are detected, contact authorized service personnel.
6. Troubleshooting
If you experience any issues with your power chair, consult the full owner's manual for detailed troubleshooting steps. Common issues may include:
- Power Loss: Check battery charge level and connections.
- Unresponsive Controls: Ensure the power chair is turned on and the joystick is functioning correctly.
- Unusual Noises: Inspect for loose parts or obstructions in the wheels or motors.
For persistent problems or complex repairs, contact Pride Mobility customer support or an authorized service technician.
7. Specifications
Figure 3: Detailed specifications for the Jazzy Select Power Chair.
| Feature | Specification |
|---|---|
| Model Name | Jazzy Select |
| Part Number | Jazzy Select 2S-C |
| Weight Capacity | 300 lbs. |
| Turning Radius | 23.76" |
| Overall Width | 23.27" |
| Overall Length | 43.27" |
| Maximum Speed | Up to 4.3 mph |
| Ground Clearance | 2.5" at footplate, 1.77" at motor bracket |
| Front Wheels | 6" flat free |
| Drive Wheels | 10" flat free |
| Rear Wheels | 6" flat free |
| Drivetrain | Two-motor, Mid-Wheel 6 drive |
| Braking System | Regenerative and electromechanical |
| Suspension Type | Active-Trac (ATX) with Mid-Wheel 6 Technology |
| Max Seat Dimensions | 20" x 20" (high-back) |
| Seat-to-Floor Range | 21.5" x 23.25" |
| Per Charge Range | Up to 19 miles |
| Standard Electronics | 40 amp, PG GC 3 controller |
| Component Weights | Base 124 lbs. (heaviest piece), Seat 52 lbs. (comfort high-back), Batteries 37 lbs. each |
| Battery Requirements | (2) 12 volt, deep cycle, U-1 |
| Battery Weight | 170 lbs. without batteries |
| Weight of Heaviest Piece | 114 lbs. |
| Standard Seat Weight | 50 lbs. (comfort, high-back) |
| Battery Charger | Off-board, 3.5 amp |
8. Warranty and Support
The Pride Mobility Jazzy Select Group 2 Power Chair comes with the following limited warranties:
- 5-Year Warranty: On Frame
- 3-Year Limited Warranty: On Fixed-position Seat Post
- 13-Month Limited Warranty: On Electronic and Main Frame Assemblies
- 13-Month Warranty: On Batteries
For detailed warranty information, questions, or exclusions, please contact Pride Mobility customer support. For service or technical assistance, refer to the contact information provided in your full owner's manual or visit the official Pride Mobility website.