1. Introduction
This manual provides essential information for the proper use, care, and maintenance of your Tribesigns End Table with 2 Drawers, Model JC-U00932PCS. Please read these instructions carefully to ensure safe and optimal performance of your product.
2. Setup and Placement
Your Tribesigns End Table is delivered fully assembled, requiring no additional installation. Follow these steps for initial setup:
- Unpacking: Carefully remove the end table from its packaging. Inspect for any signs of damage during transit.
- Placement: Position the table on a flat, stable surface. Ensure all four corners are evenly supported to prevent wobbling. This table is suitable for use as a sofa side table, nightstand, or accent table in living rooms, bedrooms, or offices.
- Stability Check: Gently push on the table from different directions to confirm its stability before placing items on it.
- Safety Considerations:
- Avoid placing excessively heavy objects on the tabletop to prevent potential damage or tipping. The maximum weight recommendation is 150 pounds.
- Ensure the table is positioned against a stable surface, such as a wall or a sturdy piece of furniture, to further prevent accidental tipping.
- Keep the area around the table clear to minimize the risk of collision, especially with the unique arc design.
Figure 1: Tribesigns End Table with 2 Drawers in a living room setting.
Figure 2: Product dimensions for the Tribesigns End Table.
Figure 3: Front and back views of the fully assembled end table.
3. Operation
The Tribesigns End Table is designed for convenient storage and display.
- Drawers: The table features two sliding drawers. To open, gently pull the metal handle. To close, push the drawer back until it is fully seated. These drawers are suitable for storing small items such as remote controls, books, or personal accessories.
- Tabletop: The spacious tabletop provides a surface for lamps, decorative items, beverages, or other frequently accessed items.
Figure 4: Detail of the two spacious drawers.
4. Care and Maintenance
Proper care will extend the life and preserve the appearance of your end table.
- Cleaning: For general cleaning, wipe the surface with a soft, damp cloth. For drying, follow immediately with a dry cloth to prevent water spots or moisture damage.
- Spills: Promptly wipe up any spills to prevent staining or damage to the wood finish.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, strong detergents, or chemical sprays, as these can damage the finish.
- Heat and Moisture: Avoid placing hot items directly on the tabletop. Use coasters for drinks to protect against moisture rings.
- Sunlight Exposure: Prolonged exposure to direct sunlight may cause the wood finish to fade over time.
Figure 5: Design details including arch, texture, and handles.
5. Troubleshooting
This section addresses common concerns you might encounter.
| Issue | Possible Cause | Solution |
|---|---|---|
| Table wobbles | Uneven floor surface or improper placement. | Relocate the table to a flat surface. Ensure all contact points with the floor are stable. |
| Drawers stick or do not slide smoothly | Obstruction in the drawer slides or excessive weight in the drawer. | Remove items from the drawer and check for any foreign objects. Ensure drawers are not overloaded. |
| Minor scratches on surface | Normal wear and tear or accidental contact with sharp objects. | For minor scratches, wood repair markers or furniture polish designed for wood finishes may be used. |
6. Product Specifications
| Brand | Tribesigns |
| Model Number | JC-U00932PCS |
| Product Dimensions (D x W x H) | 23.62" x 10.83" x 23.62" |
| Item Weight | 33 Pounds |
| Maximum Weight Recommendation | 150 Pounds |
| Frame Material | Engineered Wood (E1 MDF) |
| Number of Drawers | 2 |
| Color | Brown |
| Assembly Required | No (Fully Assembled) |
| Product Care Instructions | Wipe with Damp Cloth, Wipe with Dry Cloth |
| Indoor/Outdoor Usage | Indoor |
7. Warranty Information
The Tribesigns End Table with 2 Drawers comes with a Lifetime Warranty. This warranty covers manufacturing defects and ensures the product's quality under normal use. For specific terms and conditions, or to make a warranty claim, please contact Tribesigns customer support.
8. Customer Support
If you have any questions, require assistance, or need to report an issue with your Tribesigns End Table, please contact our customer support team. Refer to the product packaging or the official Tribesigns website for the most current contact information.
When contacting support, please have your model number (JC-U00932PCS) and purchase details readily available.
