NOVOO Portable Power Station

Introduction

The NOVOO Portable Power Station is designed to provide reliable and portable power for a wide range of electronic devices. With its high capacity and multiple output options, it is an ideal companion for outdoor activities, emergency backup, or simply extending the battery life of your devices on the go. This manual provides essential information on how to safely and effectively use, maintain, and troubleshoot your power station.

Image: The NOVOO Portable Power Station, showcasing its sleek black design and integrated display.

Product Features and Components

Familiarize yourself with the key features and components of your NOVOO Portable Power Station:

• High Capacity: 40,000mAh / 148Wh / 100W for extended power supply.
• Multiple Output Ports: Includes a 220V/100W AC outlet, USB-C PD 60W, and two USB-A ports.
• Intelligent LCD Display: Shows input power, output power, and remaining battery level.
• Integrated Flashlight: Features constant light, flash, and SOS modes for emergencies.
• Pass-Through Charging: Allows charging the power station while simultaneously powering devices.
• Advanced Safety Protections: Built-in Battery Management System (BMS) protects against over-temperature, short-circuit, over-current, and over-charge.
• Portable Design: Compact and lightweight for easy transport.

Image: Detailed view of the power station's ports and features, including the AC outlet, USB-A ports, USB-C port, DC input, LCD screen, and flashlight.

Setup

1. Unpacking: Carefully remove the power station and all accessories from the packaging.
2. Initial Charge: Before first use, fully charge the power station. Connect the provided DC wall charger to the DC input port on the power station and plug it into a wall outlet. The LCD display will indicate charging status.
3. Check Display: Once fully charged, the LCD display will show 100% battery.

Image: The power station and its included accessories: user manual, USB-C to USB-C cable, and DC wall charger.

Operating Instructions

Charging the Power Station

The power station can be charged using the DC input or the USB-C PD 60W port. For faster charging, both can be used simultaneously.

• DC Wall Charger: Connect the provided DC charger to the DC input port.
• USB-C PD 60W: Connect a USB-C PD charger (not included) to the USB-C port.
• Solar Charging (Optional): The power station supports solar charging with a compatible 45W DC solar panel (sold separately). Ensure the solar panel output is 18-30V.

Image: Illustration of the four charging options: DC input, USB-C PD 60W, and combined DC + USB-C PD charging, with estimated charging times.

Using the AC Outlet (220V/100W)

1. Press and hold the AC button for 2 seconds until "50Hz" or "60Hz" appears on the display. This activates the AC output.
2. Plug your device's power cord into the AC outlet.
3. Ensure your device's power consumption is less than 100W.
4. After use, long press the AC OFF button to turn off the AC output and conserve power. If not turned off, it will continue to consume power until it runs out.

Important: Do not connect any inductive load device with a power rating over 100W.

Image: Visual warning indicating types of high-power devices (e.g., toaster, heater, hair dryer) that should not be connected to the AC outlet due to exceeding the 100W limit.

Using USB Ports (USB-A, USB-C PD 60W)

1. Press the USB button until the USB logo appears on the display. (Note: The DC button also controls USB output).
2. Connect your device using a compatible USB cable to either the USB-A ports or the USB-C PD 60W port.
3. The USB-C PD port supports fast charging for compatible devices, delivering up to 60W.
4. The power station can charge multiple devices simultaneously via its various ports.

Image: Demonstration of USB-C 60W Power Delivery fast charging, showing a smartphone charging from 0% to 50% in 30 minutes.

Image: An overhead view illustrating the ability to charge four different devices (camera, earbuds, smartphone, laptop) at the same time using the power station's various ports.

Flashlight Operation

The power station includes a multi-mode flashlight for various situations:

• Press the flashlight button once for constant light mode.
• Press again for flash mode.
• Press a third time for SOS mode.
• Press a fourth time to turn off the flashlight.

Image: Visual representation of the power station's flashlight modes, including constant light, SOS signal, and a flashing light, useful for emergencies.

Safety Precautions

To ensure safe operation and prolong the life of your power station, please observe the following:

• Do not expose the power station to extreme temperatures, direct sunlight, or high humidity.
• Do not disassemble, modify, or attempt to repair the unit.
• Keep away from flammable materials and liquids.
• Ensure proper ventilation during use and charging.
• Do not block the cooling vents. The power station features an intelligent cooling system with two fans.
• Avoid dropping or subjecting the unit to strong impacts.
• Keep out of reach of children.
• Do not connect devices that exceed the power station's rated output (100W for AC).
• The built-in Battery Management System (BMS) provides protection against overcharge, over-discharge, over-voltage, over-current, and short-circuit.

Image: Icons representing the multiple safety protections integrated into the power station, including safeguards against overcharging, overvoltage, overcurrent, over-discharge, and short circuits.

Image: Diagram showing the intelligent cooling system with two fans, ensuring optimal operating temperature for the power station.

Maintenance

• Storage: For best results, fully charge the power station every 3 months and store it between -20°C to 45°C (-4°F to 113°F).
• Cleaning: Use a dry, soft cloth to clean the exterior of the power station. Do not use abrasive cleaners or solvents.
• Battery Health: To maintain battery health, avoid completely draining the battery frequently.
• Trickle Charging Mode: The USB ports feature a trickle charging mode for low-power devices (e.g., earbuds, smartwatches). After 8 hours of charging, it automatically shuts off to prevent overcharging.

Image: Illustration of the USB trickle charging mode, designed for low-current devices like wireless earbuds, which automatically shuts off after 8 hours.

Troubleshooting

Specifications

Image: Close-up of the intelligent LCD display, showing real-time input and output wattage, along with battery level and frequency.

Package Contents

The following items are included in your package:

• NOVOO Portable Power Station (1 unit)
• USB-C to USB-C Cable (1 unit)
• User Manual (this document)
• DC Wall Charger (1 unit)

Note: A USB-C PC charger is not included.

Warranty and Support

NOVOO is committed to your satisfaction. If you have any questions or encounter issues with your power station, please refer to the troubleshooting section or contact our customer support.

For support, please send your exact question to: sales1@novoo.cc