Introduction
This manual provides instructions for the proper use and care of your MONODEAL DG10-CC Magnetic Charging Cable. This cable is designed as a replacement charging solution specifically for MONODEAL DG10 Pro bone conduction headphones.
Important Compatibility Note
Please read carefully before use: This new version of the DG10-CC charging cable is compatible with MONODEAL DG10 Pro bone conduction headphones purchased after December 2024. If your DG10 Pro headphones were purchased before December 2024, they use an older version of the charging cable, and this new cable will not be compatible. Please confirm your headphone's compatibility before attempting to charge.
Package Contents
- 1 x MONODEAL DG10-CC Magnetic Charging Cable
Note: Headphones are not included with this charging cable.
Setup and Connection
Follow these steps to connect your MONODEAL DG10-CC Magnetic Charging Cable to your DG10 Pro headphones and a power source.
- Identify the Magnetic Connector: Locate the magnetic charging pins on your DG10 Pro bone conduction headphones.
Image: The magnetic end of the DG10-CC charging cable, showing the four contact pins.
- Connect to Headphones: Align the magnetic end of the DG10-CC charging cable with the charging port on your DG10 Pro headphones. The strong magnetic module will automatically snap into place, ensuring a secure connection.
Image: The USB-A end of the DG10-CC charging cable, ready to be plugged into a power source.
- Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power source. This can be a computer's USB port, a USB wall charger, or a portable power bank. The cable requires a 5V DC power supply.
Operating Instructions (Charging)
Once connected, your DG10 Pro headphones will begin charging. The charging status is typically indicated by an LED light on your headphones (refer to your DG10 Pro headphone manual for specific LED indicators).
- Ensure the magnetic connection is firm and stable to prevent interruptions during charging.
- Charging time may vary depending on the power source and the current battery level of your headphones.
- Disconnect the cable once your headphones are fully charged to prolong battery life.
Maintenance and Care
Proper care will extend the life of your charging cable.
- Cleaning: Gently wipe the magnetic contacts with a dry, soft cloth if they appear dirty. Avoid using liquids or abrasive cleaners.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, which can damage internal wires.
- Handling: Always grasp the connector ends when plugging or unplugging the cable, rather than pulling on the cable itself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones not charging. |
|
|
| Cable frequently disconnects. |
|
|
Specifications
- Brand: MONODEAL
- Model Name: DG10-CC
- Connector Type: USB (USB-A to Magnetic 4-pin)
- Cable Type: USB
- Compatible Devices: MONODEAL DG10 Pro Bone Conduction Headphones (new version, purchased after Dec 2024)
- Special Feature: Magnetic connectivity, Lightweight
- Color: Black
- Connector Gender: USB-A Male to Magnetic 4-pin Male
- Number of Pins: 4
- Maximum Voltage: 5 Volts (DC)
- Item Weight: 0.563 ounces
- Package Dimensions: 4.88 x 4.33 x 0.43 inches
Support
For further assistance or inquiries regarding your MONODEAL DG10-CC Magnetic Charging Cable, please refer to the official MONODEAL support channels or visit the MONODEAL Store on Amazon.
