Introduction
Thank you for choosing the Sandberg Powerbank USB-C PD 130W 50000. This high-capacity mobile charger is designed to provide reliable power for your phone, tablet, and laptop, keeping you connected for weeks. It features a powerful 50,000 mAh capacity, multiple charging ports, and an integrated flashlight. This manual will guide you through the setup, operation, and maintenance of your power bank.
Product Overview
The Sandberg Powerbank USB-C PD 130W 50000 is a versatile charging solution. Below are key visual components and their descriptions.







Setup
Initial Charging
Before first use, fully charge your Sandberg Powerbank. Use a compatible USB-C power adapter (not included) and the provided USB-C to USB-C cable (max 100W) or USB-A to USB-C cable (2A) to connect the power bank to a power source. The digital display will show the charging progress.
- Connect the USB-C cable to either the "IN 2" or "IN/OUT 3" port on the power bank.
- Connect the other end of the cable to a suitable USB wall charger or computer USB port.
- The display will show the charging percentage. Charge until it reaches 100%.
Package Contents
- 1 x Sandberg Powerbank USB-C PD 130W 50000
- 1 x Quick Guide
- 1 x USB-C to USB-C cable (max 100W, 50 cm length)
- 1 x USB-A to USB-C cable (2A, 50 cm length)
Operating Instructions
Charging Devices
The power bank can charge up to 5 devices simultaneously using its various ports.
- Connect your device: Use a compatible charging cable to connect your device to one of the power bank's output ports:
- USB-C PD Ports (OUT 1, IN/OUT 3): Ideal for fast charging laptops, tablets, and smartphones that support USB Power Delivery. OUT 1 provides up to 30W, and IN/OUT 3 provides up to 100W.
- USB-A Ports (OUT 4, OUT 5, OUT 6): Suitable for charging smartphones, headphones, and other USB-powered devices. These ports provide up to 18W.
- Initiate Charging: The power bank should automatically begin charging your device. If not, press the power button once to activate the output.
- Monitor Charge: The digital display on the power bank shows the remaining battery percentage.
Using the Flashlight
The power bank features a powerful integrated flashlight.
- Turn On/Off: Press the flashlight button (sun icon) once to turn the flashlight on. Press it again to turn it off.
Always-On Mode
For low-power devices that might stop charging due to low current draw, the power bank supports an "Always-On" mode.
- Activate Always-On: Double-press the power button to activate Always-On mode. The display may indicate this mode.
- Deactivate Always-On: Double-press the power button again to exit Always-On mode, or it will automatically deactivate after a period of inactivity or when the power bank is fully discharged.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your power bank.
- Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the power bank. Do not use liquid cleaners or abrasive materials.
- Battery Health: For optimal battery life, avoid fully discharging the power bank regularly. Recharge it when the charge level is low. If storing for extended periods, charge it to about 50-70% every few months.
- Avoid Drops: While robust, avoid dropping the power bank, as this can damage internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Cable not connected properly; Faulty cable/adapter; Power source issue. | Ensure cables are securely connected. Try a different cable or power adapter. Test the power source with another device. |
| Device not charging from power bank | Power bank is off; Low power bank battery; Incompatible cable; Device not drawing enough current (for low-power devices). | Press the power button to turn on. Recharge the power bank. Use the correct cable for your device. Activate "Always-On" mode for low-power devices. |
| Flashlight not working | Flashlight button not pressed correctly; Power bank battery too low. | Ensure a firm press on the flashlight button. Recharge the power bank. |
| Power bank shuts off unexpectedly | Overload protection; Low battery; Automatic shutdown (if not in Always-On mode for low-power devices). | Reduce the number of connected devices. Recharge the power bank. Activate "Always-On" mode if charging a low-power device. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Powerbank USB-C PD 130W 50000 |
| Brand | Sandberg |
| Capacity | 50,000 mAh / 185 Wh |
| Battery Type | Lithium-Ion |
| Input Ports | 2 x USB-C |
| Output Ports | 2 x USB-C, 3 x USB-A |
| USB-C PD Output (OUT 1) | Up to 30W |
| USB-C PD Output (IN/OUT 3) | Up to 100W |
| USB-A Output (OUT 4, 5, 6) | Up to 18W (shared) |
| Flashlight Power | 2 (modes/intensity) |
| Display | Charge status display |
| Special Features | Supports Always-On mode, Integrated flashlight |
| Dimensions | 15 x 5 x 7 cm |
| Weight | 1052 g |
Warranty and Support
Sandberg products are known for their quality and durability. This power bank comes with a 5-year warranty, ensuring peace of mind.
For technical support, warranty claims, or further inquiries, please visit the official Sandberg website or contact their customer service directly. Refer to the quick guide included in your package for specific contact details or regional support information.
Online Resources: Sandberg Official Website





