1. Introduction
This manual provides detailed instructions for the operation and maintenance of your PULIVIA YS-810 Sports Stopwatch. Designed for athletes, coaches, and general timekeeping, this stopwatch offers multiple functions including lap/split timing, a countdown timer, alarm, and calendar.
2. Product Overview
The PULIVIA YS-810 Sports Stopwatch features a large display and a durable design. It includes several buttons for mode selection, start/stop, and reset/split functions.

Image: The PULIVIA YS-810 Sports Stopwatch displaying the current time and date. The stopwatch is black with yellow accents and features three buttons on the top and one red button on the bottom right.
Button Functions:
- MODE Button: Cycles through different operating modes (Time, Alarm, Stopwatch, Timer, Pace).
- START/STOP Button: Initiates and pauses timing functions.
- SPLIT/RESET Button: Records lap/split times and resets the stopwatch.
- RECALL Button: Accesses stored lap/split times.
3. Setup
3.1 Initial Use
- Screen Protector: A screen protector is attached to the watch. You may remove it for clearer visibility.
- Battery: The stopwatch comes with a pre-installed battery. If the display is dim or unresponsive, replace the battery (type not specified, refer to product packaging for details).
3.2 Setting Time and Date
- In Time Mode (default display showing current time and date), press and hold the MODE button until the display flashes.
- Use the START/STOP button to adjust the flashing value (e.g., hour, minute, year, month, day).
- Press the SPLIT/RESET button to move to the next setting.
- Once all settings are adjusted, press the MODE button again to exit the setting mode.
4. Operating Modes
4.1 Time Mode (Clock & Calendar)
This is the default display mode, showing the current time, day of the week, and date. Use the MODE button to cycle to this display if you are in another function.
4.2 Alarm Mode
To set the alarm:
- Press the MODE button until 'AL' (Alarm) appears on the display.
- Press and hold the START/STOP button until the hour digit flashes.
- Use the SPLIT/RESET button to adjust the hour.
- Press the START/STOP button to move to the minute setting, then use SPLIT/RESET to adjust.
- Press START/STOP again to confirm and exit.
- To activate/deactivate the alarm, press the SPLIT/RESET button while in Alarm Mode. An alarm icon will appear/disappear.
4.3 Stopwatch Mode
The stopwatch measures time with 1/100-second accuracy and can record multiple lap/split times.
- Press the MODE button until 'STOPWATCH' appears.
- Press START/STOP to begin timing.
- Press SPLIT/RESET to record a lap or split time without stopping the main timer. The display will momentarily show the lap/split time.
- Press START/STOP again to pause the stopwatch.
- To resume, press START/STOP.
- To reset the stopwatch to zero, ensure it is paused, then press SPLIT/RESET.
Recalling Lap/Split Times
The stopwatch can store up to 10 lap/split times.
- After stopping the stopwatch, press the RECALL button.
- Use the SPLIT/RESET button to scroll through the stored lap/split times.
- Press RECALL again to exit the recall mode.
4.4 Timer Mode
The timer functions as a basic countdown timer.
- Press the MODE button until 'TIMER' appears.
- Press and hold the START/STOP button to set the desired countdown time (hours, minutes, seconds). Use SPLIT/RESET to adjust values and START/STOP to move between units.
- Press START/STOP to begin the countdown.
- Press START/STOP again to pause/resume.
- When the timer reaches zero, an alarm will sound.
4.5 Pace Mode
The pace function allows you to set a desired pace (e.g., 5 to 40 beats per minute) for training.
- Press the MODE button until 'PACE' appears.
- Press and hold the START/STOP button to set the desired pace. Use SPLIT/RESET to adjust the value.
- Press START/STOP to activate the pace function. The stopwatch will emit a beep at the set interval.
- Press START/STOP again to stop the pace function.
5. Care and Maintenance
5.1 Water Resistance
The PULIVIA YS-810 stopwatch is water-resistant to dripping, splashing, and sweat. It is not designed for submersion in water, such as swimming or diving. Do not press any buttons while the stopwatch is wet or submerged.
5.2 Cleaning
Wipe the stopwatch with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the display or casing.
5.3 Storage
Store the stopwatch in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
6. Troubleshooting
- No Display/Dim Display: Check or replace the battery.
- Buttons Unresponsive: Ensure the stopwatch is not in a locked mode (if applicable, refer to specific model features) or try resetting the device by removing and reinserting the battery.
- Incorrect Time/Date: Follow the instructions in Section 3.2 to reset the time and date.
7. Specifications
- Brand: PULIVIA
- Model: YS-810
- Accuracy: 1/100-second
- Lap/Split Memory: Up to 10 laps/splits
- Functions: Stopwatch, Timer, Pace, Clock, Calendar, Alarm
- Material: Nylon (strap), durable plastic casing
- Water Resistance: Splash-proof (not for submersion)
8. Warranty and Support
PULIVIA offers customer service for any inquiries or issues you may encounter. For support, please contact us via Amazon email. We provide 7 days/24 hours customer service.