RUIMEN Smart Watch Charger Cable User Manual

Introduction

This manual provides essential information for the safe and effective use of your RUIMEN Smart Watch Charger Cable. Please read this manual thoroughly before using the product and retain it for future reference.

The RUIMEN Smart Watch Charger Cable is designed to quickly and safely charge compatible RUIMEN smartwatches, specifically models H1 and D1. It features a magnetic USB interface for convenient and secure connection.

Product Overview

The charger cable consists of a standard USB-A connector on one end and a magnetic two-pin charging interface on the other. The magnetic design ensures a secure and correct connection to your smartwatch.

Setup

Setting up your RUIMEN Smart Watch Charger Cable is straightforward. No software installation is required.

1. Identify a Power Source: Locate a compatible USB power source. This can be a USB wall adapter (5V/1A recommended), a computer's USB port, a power bank, or any other standard USB charging port.
2. Connect the USB-A End: Insert the USB-A connector of the charger cable into the chosen USB power source.
3. Prepare Your Smartwatch: Ensure your RUIMEN H1 or D1 smartwatch is clean and dry, especially around its charging contacts.
4. Connect the Magnetic End: Bring the magnetic charging interface of the cable close to the charging contacts on the back of your smartwatch. The built-in magnets will automatically align and secure the connection.
5. Verify Connection: Once connected, your smartwatch should indicate that it is charging (e.g., a charging icon on the screen).

Note: Ensure the magnetic polarity is correct. If the watch does not show a charging indicator, gently detach and re-attach the magnetic connector, ensuring it snaps into place correctly.

Operating Instructions

The RUIMEN Smart Watch Charger Cable is designed for simple operation.

Charging Your Smartwatch

• Connect the USB end of the cable to a power source.
• Align the magnetic charging pins with the charging contacts on your RUIMEN H1 or D1 smartwatch. The magnetic force will pull the connector into place.
• The smartwatch screen will typically display a charging animation or battery percentage increase, indicating that charging has begun.
• A full charge typically takes approximately two hours. Avoid overcharging by disconnecting the watch once it reaches 100% or when the charging indicator shows completion.

Disconnection

To disconnect, simply pull the magnetic charging interface away from the smartwatch. Then, unplug the USB-A connector from the power source.

Maintenance

Proper maintenance will extend the life of your charger cable.

• Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or abrasive materials. Ensure the magnetic pins are free of dust or debris.
• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply, which can damage internal wires.
• Handling: Always hold the connectors when plugging or unplugging, rather than pulling on the cable itself.

Troubleshooting

Specifications

• Model Number: CDQ-H1
• Brand: RUIMEN
• Connector Type: USB-A to Magnetic 2-pin
• Compatible Devices: RUIMEN H1, RUIMEN D1 Smartwatches
• Special Feature: Magnetic Interface
• Package Dimensions: 6.3 x 2.24 x 0.51 inches
• Item Weight: 0.32 ounces
• Manufacturer: RUIMEN
• Country of Origin: China

Warranty and Support

For warranty information or technical support, please contact RUIMEN customer service through the platform where you purchased the product or visit the official RUIMEN store page on Amazon:

RUIMEN Official Store on Amazon

Please have your product model number (CDQ-H1) and purchase details ready when contacting support.