Mitchell Acoustics 4020101
Mitchell Acoustics TT1 Bluetooth Vinyl Turntable User Manual
Model: 4020101
Introduction
Thank you for choosing the Mitchell Acoustics TT1 Bluetooth Vinyl Turntable. This manual provides essential information for setting up, operating, and maintaining your new turntable. The TT1 is designed to deliver high-fidelity audio with the convenience of modern connectivity, featuring a belt-drive system, integrated phono pre-amp, and an Audio Technica AT91 Moving Magnet Cartridge. Its robust aluminium deck and tonearm ensure stable and precise playback.
Important Safety Information
Please read all safety instructions carefully before using this product. Keep this manual for future reference.
- Do not expose the unit to rain or moisture.
- Do not block any ventilation openings.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified service personnel.
- Ensure the power cord is not walked on or pinched.
- Unplug the apparatus during lightning storms or when unused for long periods.
Package Contents
Verify that all items listed below are included in your package:
- Mitchell Acoustics TT1 Vinyl Turntable
- AC Power Cord
- Center Adapter (45 RPM adapter)
- Dust Cover
- Platter
- Felt Mat
- Counterweight
- Anti-skate Weight
Product Overview
Familiarize yourself with the components of your TT1 turntable.
Front view of the Mitchell Acoustics TT1 Turntable, showing the platter, tonearm, and dust cover.
Rear view of the Mitchell Acoustics TT1 Turntable, highlighting the RCA line out, pre-amp switch, and AC power input.
Close-up view of the Audio Technica AT91 Moving Magnet Cartridge, which provides excellent channel separation and low distortion.
Detail of the speed selector knob, allowing selection between 33 and 45 RPM, and the power off position.
Close-up of the aluminium tonearm with adjustable counterweight, crucial for proper tracking and preventing record damage.
Setup
- Unpacking: Carefully remove the turntable and all accessories from the packaging. Retain the packaging for future transport or storage.
- Placement: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
- Platter Installation: Place the aluminium platter onto the turntable spindle. Ensure it sits securely.
- Belt Installation: Locate the drive belt under the platter. Carefully stretch the belt around the motor pulley.
- Felt Mat: Place the felt mat on top of the platter.
- Counterweight Adjustment: Slide the counterweight onto the rear of the tonearm. Adjust it to achieve proper tracking force for the Audio Technica AT91 cartridge (refer to cartridge specifications for precise weight, typically 2.0 grams). Balance the tonearm first so it floats freely, then rotate the counterweight to the desired setting.
- Anti-skate Adjustment: Attach the anti-skate weight to the small fishing line and loop it over the anti-skate post. This helps prevent the stylus from skipping.
- Dust Cover: Install the dust cover by aligning its hinges with the slots on the turntable base.
- Power Connection: Connect the AC power cord to the turntable's AC input and then to a wall outlet.
- Audio Connection:
- Via RCA (Wired): Connect RCA cables from the "LINE OUT" jacks on the rear of the turntable to your amplifier or powered speakers. Ensure the "PRE-AMP" switch on the turntable's rear is set to "ON" if connecting to an amplifier without a dedicated phono input, or "OFF" if connecting to a phono input.
- Via Bluetooth (Wireless): The TT1 features automatic Bluetooth pairing. Power on the turntable and ensure your Bluetooth speakers (e.g., Mitchell Acoustics uSTREAM ONE or uSTREAM GO) are in pairing mode. The turntable will automatically attempt to connect.
Operating Instructions
Playing a Record
- Place a record on the platter, ensuring it is centered. If playing a 45 RPM single, use the included center adapter.
- Select the appropriate speed (33 or 45 RPM) using the speed selector knob.
- Gently lift the tonearm using the cueing lever.
- Position the tonearm over the desired starting groove of the record.
- Slowly lower the tonearm using the cueing lever. The stylus will make contact with the record, and playback will begin.
- At the end of the record, the auto-stop function will automatically stop the platter rotation. Lift the tonearm and return it to its rest.
Bluetooth Connectivity
The TT1 turntable is designed for seamless Bluetooth connection to compatible speakers, such as Mitchell Acoustics uSTREAM ONE or uSTREAM GO speakers.
- Ensure your Bluetooth speakers are powered on and in pairing mode. Refer to your speaker's manual for specific pairing instructions.
- Power on the TT1 turntable. It will automatically search for and connect to nearby Bluetooth devices in pairing mode.
- Once connected, the Bluetooth indicator on your speakers (if applicable) will confirm the connection. Audio from the turntable will now play through your Bluetooth speakers.
Maintenance
Cleaning the Stylus
A clean stylus ensures optimal sound quality and extends the life of your records. Use a soft brush designed for stylus cleaning, brushing gently from back to front.
Cleaning the Turntable
Wipe the turntable's surface and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry wipe. Avoid abrasive cleaners or solvents.
Record Care
Handle records by their edges. Store them vertically in their sleeves to prevent warping. Clean records regularly with a record brush or cleaning solution to remove dust and static.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume | Incorrect PRE-AMP switch setting; loose RCA cables; speakers not powered on/connected; Bluetooth not paired. | Check PRE-AMP switch (ON for line-in, OFF for phono-in). Ensure RCA cables are securely connected. Verify speakers are on and connected. Re-pair Bluetooth if necessary. |
| Distorted sound | Dirty stylus; incorrect tracking force; damaged record. | Clean the stylus. Re-adjust counterweight for correct tracking force. Try a different record. |
| Skipping or jumping | Incorrect tracking force; anti-skate not set; turntable not level; dirty/damaged record. | Adjust counterweight. Ensure anti-skate weight is properly installed. Place turntable on a level surface. Clean or replace record. |
| Platter not spinning | Power not connected; belt dislodged; speed selector in OFF position. | Check power connection. Re-seat the drive belt. Turn speed selector to 33 or 45 RPM. |
Specifications
- Brand: Mitchell Acoustics
- Model Name: Mitchell Acoustics | Belt drive Bluetooth vinyl turntable with built-in PHONO preamp
- Item Model Number: 4020101
- Connectivity Technology: Bluetooth, RCA
- Maximum Rotational Speed: 33, 45 RPM
- Cartridge: Audio Technica AT91 Moving Magnet Cartridge
- Material: Aluminium (platter, tonearm)
- Product Dimensions: 44 x 38 x 13.5 cm
- Item Weight: 6.2 Kilograms
- Power Consumption (On-mode): 45 watts
- Special Features: Integrated Phono Pre-Amp, Auto-Stop, Adjustable Counterweight, Anti-skating System
Warranty and Support
Mitchell Acoustics products are designed for quality and reliability. For any technical support or warranty inquiries, please contact Mitchell Acoustics customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.
For more information, visit the Mitchell Acoustics Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.