TEAMGROUP T-Force Delta RGB DDR5 64GB (2x32GB) 6000MHz CL38 Desktop Memory Module User Manual

1. Introduction

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your TEAMGROUP T-Force Delta RGB DDR5 64GB (2x32GB) 6000MHz CL38 Desktop Memory Module. This high-performance memory kit is designed for desktop systems and is compatible with both Intel XMP 3.0 and AMD Expo for optimized performance.

Figure 1: Two TEAMGROUP T-Force Delta RGB DDR5 64GB (2x32GB) 6000MHz CL38 Desktop Memory Modules.

2. Setup and Installation

Proper installation is crucial for optimal performance and system stability. Always ensure your computer is powered off and unplugged from the wall outlet before handling internal components.

2.1 Safety Precautions

• Always power off your computer and unplug it from the wall outlet before installation.
• Discharge any static electricity from your body by touching a grounded metal object (e.g., your computer case) before handling memory modules.
• Handle memory modules by their edges to avoid touching the gold contacts or integrated circuits.

2.2 Memory Module Installation Steps

1. Prepare your system: Power down your computer, unplug the power cable, and open the computer case.
2. Locate DIMM slots: Identify the DDR5 DIMM slots on your motherboard. Refer to your motherboard's manual for the recommended slot configuration for dual-channel memory (typically slots A2 and B2, or the 2nd and 4th slots from the CPU).
3. Open retaining clips: Gently push open the retaining clips at both ends of the DIMM slot.
4. Align and insert: Align the notch on the memory module with the key in the DIMM slot. Insert the module firmly into the slot.
5. Secure module: Apply even pressure to both ends of the module until the retaining clips snap into place, securing the module.
6. Repeat for additional modules: If installing multiple modules, repeat steps 3-5 for each module, following your motherboard's recommended configuration.
7. Close case and power on: Close your computer case, reconnect the power cable, and power on your system.

2.3 BIOS Configuration (XMP/EXPO)

To achieve the advertised 6000MHz speed, you must enable the Intel XMP 3.0 (Extreme Memory Profile) or AMD EXPO (Extended Profiles for Overclocking) profile in your motherboard's BIOS/UEFI settings. This is typically a one-click operation.

1. Access BIOS/UEFI: During system startup, repeatedly press the designated key (often Del, F2, F10, or F12) to enter the BIOS/UEFI setup.
2. Locate XMP/EXPO setting: Navigate to the "Overclocking," "Memory," or "Advanced" section. Look for an option labeled "XMP," "EXPO," "D.O.C.P.," or similar.
3. Enable profile: Select the appropriate profile (e.g., "XMP Profile 1" or "EXPO Profile 1") to enable the rated memory speed and timings.
4. Save and exit: Save your changes and exit the BIOS/UEFI. Your system will restart with the new memory settings applied.

3. Operating Your Memory Modules

Once installed and configured, your T-Force Delta RGB DDR5 memory modules will operate at their rated speed, enhancing system responsiveness and performance for various tasks, including gaming and productivity.

3.1 RGB Lighting Control

The integrated RGB lighting can be customized using compatible motherboard RGB synchronization software. This allows you to personalize the lighting effects to match your system's aesthetic.

• Supported software includes: ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, and MSI Mystic Light Sync.
• Refer to your motherboard's manual or the respective software documentation for detailed instructions on controlling the RGB lighting.

Figure 2: T-Force Delta RGB DDR5 modules showcasing customizable RGB lighting effects when installed in a compatible system.

4. Maintenance

DDR5 memory modules, especially high-speed ones, generate heat. The T-Force Delta RGB modules are equipped with heat spreaders to dissipate this heat effectively. Regular maintenance of your computer system contributes to the longevity and stable operation of your memory.

• Maintain good airflow: Ensure your computer case has adequate airflow to prevent heat buildup around the memory modules and other components.
• Dust removal: Periodically clean dust from inside your computer case, especially around fans and heatsinks, to maintain efficient cooling.
• Avoid physical damage: Handle memory modules with care. Avoid dropping them or applying excessive force.

5. Troubleshooting

If you encounter issues with your memory modules, consider the following troubleshooting steps:

• System instability/crashing after XMP/EXPO:
  • Ensure your motherboard BIOS/UEFI is updated to the latest version.
  • Verify that your CPU and motherboard officially support the memory speed (6000MHz) and capacity (64GB) of this kit.
  • If using four memory sticks, some motherboards may struggle to maintain high XMP/EXPO speeds. Try testing with only two sticks in the recommended dual-channel slots.
  • Consider manually adjusting memory timings or slightly reducing the frequency in BIOS/UEFI if stability issues persist. Consult your motherboard manual for advanced memory settings.
• Memory not detected or incorrect capacity:
  • Reseat the memory modules firmly into their slots. Ensure the retaining clips are fully engaged.
  • Test each module individually in a known working slot to identify a faulty stick.
  • Check for bent pins on the CPU socket (if you recently installed the CPU).
• RGB lighting not working:
  • Ensure all necessary RGB headers are correctly connected to the motherboard.
  • Install and update your motherboard's RGB synchronization software.
  • Check for conflicts with other RGB software or components.

6. Specifications

7. Warranty and Support

TEAMGROUP products are manufactured to high standards and undergo rigorous testing. For specific warranty terms and conditions, please refer to the official TEAMGROUP website or the warranty information included with your product packaging.

For technical support, product inquiries, or warranty claims, please visit the official TEAMGROUP support channels. Keep your proof of purchase and product model number (FF4D564G6000HC38ADC01) readily available.

You can find more information and support on the TEAMGROUP Store on Amazon.