KRIB BLING Full Automatic Washing Machine XQB201A User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your KRIB BLING Full Automatic Washing Machine, Model XQB201A. Please read it thoroughly before use and retain it for future reference.

Figure 1.1: KRIB BLING 17.7 lbs portable automatic washing machine, gold color, front view.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, follow these basic precautions:

• Read all instructions before using the appliance.
• Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they emit vapors that could ignite or explode.
• Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances emit vapors that could ignite or explode.
• Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
• Before the appliance is removed from service or discarded, remove the door to the washing compartment.
• Do not reach into the appliance if the tub or agitator is moving.
• Do not install or store this appliance where it will be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
• Always disconnect the appliance from the power supply before cleaning, servicing, or performing any maintenance.
• Ensure the power cord is not damaged and is properly grounded.

3. Product Overview

3.1 Components

Figure 3.1: Key components of the washing machine, including the inlet pipe, LED control panel, built-in handle, built-in filter, water inlet, and stainless steel tub.

3.2 Features

• Full Automatic Operation: Select a program and water level, and the machine operates independently.
• Integrated Drain Pump: Allows for flexible drainage from various angles.
• Compact and Portable Design: Ideal for small living spaces such as RVs, apartments, dorms, and for camping.
• 17.7 lbs Capacity: Suitable for 3-4 members, accommodating various laundry loads.
• Automatic Imbalance Adjustment: Minimizes shaking and noise during wash and spin cycles.
• Diamond Honeycomb Inner Tub: Designed to protect clothing from damage during washing.
• Powerful Motor: Ensures effective cleaning and durability.

Figure 3.2: Diamond honeycomb design of the stainless steel inner tub for clothing protection.

Figure 3.3: Motor components emphasizing high speed, all copper wire, stability, and durability.

4. Setup and Installation

4.1 Unpacking

Carefully remove all packaging materials. Ensure to remove the foam pad and bottom bracket used for motor protection during transportation. Failure to remove these can cause loud noise or improper operation.

4.2 Location

Place the washing machine on a stable, level surface. Ensure it is near a water supply and a suitable drain. Avoid locations exposed to direct sunlight or freezing temperatures.

Figure 4.1: The washing machine is suitable for various compact living spaces.

4.3 Water Supply Connection

1. Connect the water inlet hose to a suitable faucet.
2. Ensure the connection is tight and use the provided adapter and rubber rings to prevent leaks.
3. Open the water faucet to allow water into the machine.

4.4 Drain Hose Installation

Position the drain hose so that its outlet is lower than the machine's drain outlet to ensure proper drainage. The integrated drain pump facilitates drainage from different angles.

Figure 4.2: Illustration of the drain pump and proper drain hose positioning.

4.5 Power Connection

Connect the power cord to a grounded electrical outlet. Ensure the voltage matches the machine's requirements.

5. Operating Instructions

5.1 Control Panel Overview

Figure 5.1: Multifunctional control panel with LED display.

The control panel features an LED display and various buttons for program selection, water level adjustment, and operation control.

5.2 Basic Operation Steps

1. Turn on the Power: Press the 'Power on/off' button.
2. Set Mode and Water Level: Use the 'Program' button to select your desired washing cycle and the 'Water level' button to adjust the water volume.
3. Press Start: Press the 'Start/Pause' button to begin the washing cycle.

Figure 5.2: Basic operation steps for the washing machine.

5.3 Washing Programs

The machine offers 10 standard washing programs:

• Standard
• Soft
• Quick wash
• Heavy duty
• Soak wash
• Wash only
• Spin only
• Tub air dry
• Tub clean
• Water recycle

5.4 Water Level Selection

Choose from 8 water levels to match your laundry load size. The machine's capacity is 17.7 lbs.

Figure 5.3: Capacity guide for common clothing items.

5.5 Delay Start Function

The machine features a 24-hour delay cleaning function. Refer to the control panel for setting instructions.

6. Maintenance and Care

6.1 Cleaning the Lint Filter

Regularly clean the built-in lint filter to ensure optimal washing performance and prevent lint buildup on clothes.

6.2 Cleaning the Exterior

Wipe the exterior of the machine with a soft, damp cloth. Avoid using abrasive cleaners or solvents.

6.3 Cleaning the Inner Tub

Utilize the 'Tub clean' program periodically to maintain the cleanliness and hygiene of the inner tub.

7. Troubleshooting

7.1 Common Issues and Solutions

Figure 7.1: Visual troubleshooting guide for common problems.

7.2 Error Codes

• E2 Error: Indicates a drainage fault. Ensure the drainage pipe is positioned correctly and is not too high, allowing water to drain smoothly.
• 66 Error: The washer will only operate when the water level reaches the set level. Check the water supply and wait to see if the washer can proceed after a certain time.

8. Technical Specifications

Figure 8.1: Product dimensions.

Figure 8.2: Inner tub dimension: 14.96 inches diameter.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact KRIB BLING customer service. Keep your purchase receipt as proof of purchase.