1. Product Overview
The Vactidy Cordless Vacuum Cleaner is designed for efficient and convenient cleaning of various floor types. Its lightweight and versatile design allows for easy conversion between stick and handheld modes, making it suitable for a wide range of cleaning tasks.
Image: The Vactidy Cordless Vacuum Cleaner in its full stick configuration and as a handheld unit, alongside its various attachments and filters.
2. Setup and Assembly
Follow these steps to assemble your Vactidy Cordless Vacuum Cleaner and prepare it for first use.
2.1 Assembly
- Insert the retractable metal tube into the main body until it clicks securely.
- Attach the motorized brush head to the bottom end of the metal tube. Ensure it clicks into place.
- For handheld use, detach the metal tube and attach desired accessories (e.g., 2-in-1 crevice tool, round sofa brush) directly to the main body.
2.2 Initial Charging
Before first use, fully charge the detachable battery. A full charge takes approximately 4 hours.
- Remove the battery from the main body by pressing the release button.
- Connect the adapter to the charging port on the battery.
- Plug the adapter into a power outlet. The indicator lights on the battery will show charging status.
- Once fully charged, disconnect the adapter and reinsert the battery into the main body.
Image: A close-up view of the detachable battery being charged, highlighting its long-lasting runtime and separate charging capability.
3. Operating Instructions
Understand the various features and modes of your vacuum cleaner for optimal performance.
3.1 Suction Modes
The vacuum offers two suction modes to suit different cleaning needs:
- Standard Mode (12KPa): Ideal for light debris and everyday cleaning on hard floors and low-pile carpets. Provides up to 45 minutes of runtime.
- Max Mode (20KPa): Provides powerful suction for stubborn dirt, pet hair, and deeper cleaning.
To switch between modes, press the power button located on the main body.
Image: The vacuum cleaner's brush head effectively cleaning dust, hair, and grain from a hard floor, illustrating its 20KPa powerful suction.
3.2 Flexible Maneuverability
The motorized floor brush is designed for easy navigation and includes LED headlights to illuminate dark areas.
- The brush head swivels 180° sideways and 90° up and down, allowing it to glide easily under furniture and into tight spaces.
- LED headlights on the brush head help to spot hidden dirt and debris in dimly lit areas.
Image: The vacuum cleaner's flexible swivel head with integrated LED lights reaching and cleaning under a piece of furniture, demonstrating its maneuverability.
3.3 Handheld Conversion and Extended Reach
The vacuum can be easily converted for versatile cleaning tasks.
- Handheld Mode: Detach the metal tube to convert the unit into a lightweight handheld vacuum, perfect for cleaning sofas, car interiors, and small spills.
- Extended Reach: Utilize the telescopic pipe for reaching high areas such as curtains, ceiling corners, and shelves without strain.
Image: A user demonstrating the effortless conversion of the vacuum into a handheld unit for cleaning a sofa, showcasing its versatility.
Image: A user utilizing the vacuum with its extended tube to clean high areas like curtains, illustrating its extended reach capability for above-floor cleaning.
4. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
4.1 4-Stage Filtration System
The vacuum features a fully sealed 4-stage advanced filtration system to capture fine particles and prevent secondary pollution:
- Cyclone System: Separates large particles from the airflow.
- Mesh Filter: Blocks hair and larger dust particles.
- HEPA Filter: Captures 99.99% of dust particles as small as 0.1 microns.
- Air Outlet Filter: Further separates fine particles before air is expelled.
Image: A cutaway diagram illustrating the four stages of the vacuum cleaner's filtration system: Cyclone System, Mesh Filter, HEPA Filter, and Air Outlet Filter, showing the path of air and particle separation.
4.2 Emptying the Dustbin
Empty the dustbin regularly to maintain strong suction. It is recommended to empty it after each use or when the MAX line is reached.
- Hold the main body over a trash can.
- Press the dustbin release button to open the bottom flap and empty contents.
- Close the flap securely after emptying.
4.3 Cleaning Filters
The filters are washable and should be cleaned periodically to ensure optimal performance. An additional filter is included for convenience.
- Twist and pull to remove the dustbin from the main body.
- Remove the mesh filter and HEPA filter from the dustbin.
- Rinse both filters under cold running water until the water runs clear.
- Allow filters to air dry completely for at least 24 hours before reassembling. Do not use a dryer or direct heat.
- Reassemble the filters and dustbin, ensuring all parts are securely in place.
5. Troubleshooting
If you encounter issues with your Vactidy Cordless Vacuum Cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on. | Battery is not charged or not properly installed. | Ensure battery is fully charged and securely inserted. |
| Loss of suction. | Dustbin is full; filters are clogged; brush roll is tangled. | Empty dustbin; clean or replace filters; remove tangled hair/debris from brush roll. |
| Brush roll stops spinning. | Obstruction in brush roll; brush roll not properly installed. | Check for and remove any obstructions; ensure brush roll is correctly installed. |
| Short runtime. | Battery not fully charged; using Max mode excessively. | Fully charge the battery; use Standard mode for longer cleaning sessions. |
If the issue persists after attempting these solutions, please contact customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Vactidy |
| Model Number | V8 |
| Special Feature | HEPA, Lightweight |
| Filter Type | Cartridge |
| Included Components | Brush, 16" to 26" Extended Tube, Floor Brush, 2-in-1 Crevice Tool, Round Sofa Brush, Cleaning Brush, Adapter, Wall hanger and Screws, 2 HEPA Filters |
| Cordless | Yes |
| Wattage | 200 watts |
| Runtime | Up to 45 minutes (Standard Mode) |
| Charging Time | 4 Hours |
| Form Factor | Handheld, Stick |
| Color | Green |
| Product Dimensions | 17"L x 7"W x 9"H |
| Noise Level | 70 dB |
| Item Weight | 3.31 pounds |
| Power Levels | 2 (Standard, Max) |
| Battery Type | Lithium Ion (6 batteries included) |
7. Warranty and Support
Vactidy provides comprehensive support for its products.
- Warranty: 1-year quality and technical support.
- Customer Service: 7*24h customer service is available for any inquiries or assistance.
- For further information or to contact support, please visit the official Vactidy Store: Vactidy Store on Amazon.
