1. Introduction and Overview
The DD Audio 1100 Series subwoofers are engineered for high efficiency and exceptional sound reproduction. Manufactured in the USA, these subwoofers utilize premium components and offer customization options. Their Hi-Def Tuned suspensions are optimized for performance in both sealed and small vented enclosures.
This manual provides essential information for the proper installation, operation, and maintenance of your 12-inch 1100 Series Subwoofer D4.
Key Features:
- 12-inch Subwoofer
- Capable of 400 Watts RMS power handling
- Designed for high efficiency and sound quality
- Hi-Def Tuned suspensions for versatile enclosure compatibility
- D4 (Dual 4 Ohm) impedance configuration
Figure 1: Angled view of the DD Audio 1100 Series Subwoofer D4, showcasing its robust construction and terminal connections.
2. Setup and Installation
Proper installation is crucial for optimal performance and longevity of your subwoofer. It is recommended that installation be performed by a qualified professional.
2.1 Enclosure Recommendations
The 1100 Series subwoofers are designed to perform well in both sealed and small vented enclosures. Refer to the specifications section for recommended enclosure volumes.
- Sealed Enclosure Volume: 0.8 - 1.5 cubic feet
- Ported Enclosure Volume: 0.8 - 1.75 cubic feet
2.2 Mounting
Ensure the mounting surface is rigid and secure. Use appropriate fasteners to secure the subwoofer to the enclosure. The mounting diameter required is 10.937 inches, and the mounting depth is 5.8 inches.
Figure 2: Side profile view of the subwoofer, illustrating its mounting depth and motor structure.
2.3 Wiring (D4 Model)
This subwoofer is a D4 (Dual 4 Ohm) model. This means it has two voice coils, each with a 4 Ohm impedance. Proper wiring is essential to match the impedance requirements of your amplifier.
- For a 2 Ohm final load: Wire the two 4 Ohm voice coils in parallel. Connect the positive terminal of one coil to the positive terminal of the other, and similarly for the negative terminals. Connect this parallel combination to the amplifier.
- For an 8 Ohm final load: Wire the two 4 Ohm voice coils in series. Connect the positive terminal of one coil to the negative terminal of the other. The remaining positive and negative terminals will then connect to the amplifier.
Always consult your amplifier's manual for compatible impedance loads. Incorrect wiring can damage both the subwoofer and the amplifier.
Figure 3: Close-up view of the subwoofer's terminals and wiring connections, highlighting the dual voice coil setup.
3. Operating Instructions
Once installed, proper operation ensures the longevity and performance of your subwoofer.
3.1 Power Handling
The 1100 Series Subwoofer D4 has a recommended RMS power handling of 200-400 Watts and a peak power handling of 800 Watts. Ensure your amplifier's output matches these specifications to prevent damage.
3.2 Break-in Period
Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and reach their optimal performance characteristics.
3.3 Amplifier Settings
Properly set your amplifier's gain, crossover, and bass boost settings. An improperly set gain can lead to clipping, which can damage the subwoofer even at lower volume levels. Use a low-pass filter to ensure only bass frequencies are sent to the subwoofer.
Figure 4: Top view of the subwoofer cone, showing the DD Audio logo and surround.
4. Maintenance
The DD Audio 1100 Series Subwoofer is designed for durability. Minimal maintenance is required to ensure its longevity.
- Cleaning: Use a soft, dry cloth to wipe down the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the subwoofer for any signs of damage to the cone, surround, or dust cap. Check wiring connections for tightness and corrosion.
- Environment: Ensure the subwoofer is installed in an environment free from excessive moisture, dust, and extreme temperatures.
5. Troubleshooting
If you experience issues with your subwoofer, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Subwoofer |
|
|
| Distorted Sound |
|
|
| Subwoofer Overheating |
|
|
6. Specifications
| Specification | Value |
|---|---|
| Speaker Type | Subwoofer |
| Speaker Size | 12 Inches |
| Model Name | 1112 |
| Brand | DD Audio |
| Watts RMS | 200 - 400 Watts |
| Watts Peak | 800 Watts |
| Impedance | D4 (Dual 4 Ohm) |
| VCD (Voice Coil Diameter) | 2 Inches |
| Piston Diameter | 10 Inches |
| Fs (Resonant Frequency) | 35 Hz |
| Qms | 5.952 |
| Qes | 0.943 |
| Qts | 0.815 |
| Vas (Equivalent Volume) | 57.25 Liters |
| dBSPL (Sensitivity) | 86 dB |
| Xmech (Mechanical Excursion) | 64 MM |
| Xmax (Linear Excursion) | 13.5 MM |
| Frame OD (Outer Diameter) | 12.25 Inches |
| Frame OD w/ Gasket | 12.5 Inches |
| Mounting Diameter | 10.937 Inches |
| Mounting Depth | 5.8 Inches |
| Motor Diameter | 5.75 Inches |
| Motor Depth | 2.35 Inches |
| Magnet Weight | 90 Oz |
| Woofer Displacement | 0.08 CuFt |
| Sealed Enclosure (Recommended) | 0.8 - 1.5 CuFt |
| Ported Enclosure (Recommended) | 0.8 - 1.75 CuFt |
| Product Dimensions | 5.8"D x 12.5"W x 7"H |
| Included Components | Subwoofer |
| UPC | 655471730675 |
| Date First Available | December 1, 2022 |
| Warranty Type | 1-Year Manufacturer Defect Warrany |
7. Warranty and Support
7.1 Manufacturer's Warranty
This DD Audio 1100 Series Subwoofer is covered by a 1-Year Manufacturer Defect Warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, abuse, accident, or unauthorized modifications.
For warranty claims or technical support, please contact DD Audio directly or the authorized dealer from whom the product was purchased. Please retain your proof of purchase for warranty validation.
7.2 Return Policy
The standard return policy for this product allows for a 30-day return period for refund or replacement, subject to the terms and conditions of the retailer.
7.3 Contact Information
For further assistance or inquiries, please visit the official DD Audio website or contact their customer support.