1. Introduction
Thank you for choosing the Fmart C200 Robot Vacuum and Mop. This 3-in-1 cleaning device is designed to sweep, vacuum, and mop your floors efficiently, providing a clean living environment. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your robot vacuum. Please read it thoroughly before use and keep it for future reference.
2. Package Contents
Carefully unpack the box and ensure all items listed below are present and in good condition. If any items are missing or damaged, please contact Fmart customer support.
Image: Overview of the Fmart C200 Robot Vacuum and Mop package contents, including the robot, charging station, power adapter, dust bin/water tank, side brushes, and user manual.
- Fmart C200 Robot Vacuum (1)
- Charging Station (1)
- Power Adapter (1)
- Dust Bin + Water Tank (1)
- Mopping Cloth (1)
- Side Brushes (2 pairs)
- User Manual (1)
3. Product Overview
The Fmart C200 is a versatile cleaning robot featuring a 3-in-1 design for sweeping, vacuuming, and mopping. It is equipped with advanced sensors for navigation and obstacle avoidance.
Image: The Fmart C200 Robot Vacuum highlighting its 3-in-1 capabilities: 128ml water tank, 350ml dust tank, and side sweeping functionality.
Key Features:
- Powerful Suction: Up to 2800 Pa for effective removal of dust, debris, pet hair, and stains.
- 3-in-1 Cleaning: Sweeps with dual side brushes, vacuums with tangle-free brushless suction, and mops with a 128ml water tank.
- Smart Navigation: Equipped with anti-collision and anti-drop sensors to protect furniture and prevent falls.
- App Control: Manage cleaning modes and power levels via the Fmart Smart app (Bluetooth connection, 2.4G WiFi required).
- Automatic Charging: Returns to the charging station automatically when cleaning is complete or battery is low.
- Slim Design: 85mm height allows cleaning under low furniture. Can cross obstacles up to 15mm.
Image: The Fmart C200 Robot Vacuum demonstrating its slim 85mm design, allowing it to clean under furniture.
4. Setup
4.1 Charging Station Placement
- Place the charging station against a wall in an open, uncluttered area.
- Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides of the charging station and 1.5 meters (4.9 feet) in front of it.
- Connect the power adapter to the charging station and plug the other end into a wall outlet.
- Ensure the charging station is powered on.
4.2 Initial Charge
- Place the robot onto the charging station, ensuring the charging contacts on the robot align with those on the station.
- The robot will begin charging automatically. Allow it to fully charge before its first use (approximately 4-5 hours).
- A fully charged battery provides 120-180 minutes of cleaning time.
4.3 Installing Side Brushes
- Turn the robot over.
- Align the side brushes with the square posts on the bottom of the robot and press them down until they click into place.
4.4 Installing Dust Bin / Water Tank
- Open the top cover of the robot.
- Insert the combined dust bin and water tank module into the designated slot until it clicks securely.
- For mopping, fill the water tank with clean water before inserting.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the power button on the robot for a few seconds until the indicator light turns on.
- Power Off: Press and hold the power button for a few seconds until the indicator light turns off.
5.2 Starting a Cleaning Cycle
- Manual Start: Press the power button once to start cleaning. The robot will automatically select a cleaning mode.
- App Control: Download the 'Fmart Smart' app from your mobile app store. Connect your phone to the robot via Bluetooth. Ensure your home Wi-Fi is 2.4GHz for app functionality. Use the app to select specific cleaning modes (e.g., Quiet, Standard, Powerful, Max) and schedule cleaning times.
Image: Illustration of the Fmart C200 Robot Vacuum's four suction power levels: Quiet (600Pa), Standard (1200Pa), Powerful (1800Pa), and Max (2800Pa).
5.3 Pausing/Resuming Cleaning
During a cleaning cycle, press the power button once to pause the robot. Press it again to resume cleaning.
5.4 Automatic Charging
When the battery level is low or a cleaning cycle is complete, the robot will automatically return to the charging station to recharge. Ensure the charging station is accessible and powered on.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Fmart C200 robot vacuum.
6.1 Emptying the Dust Bin
- Press the release button to remove the dust bin/water tank module.
- Open the dust bin cover and empty its contents into a trash can.
- Rinse the dust bin with water if necessary, ensuring it is completely dry before reinstallation.
6.2 Cleaning Filters
- Remove the filters from the dust bin.
- Tap the filters gently to remove dust. Do not wash the HEPA filter with water.
- Replace filters every 3-6 months, depending on usage.
6.3 Cleaning Side Brushes
- Turn the robot over and gently pull the side brushes upwards to remove them.
- Remove any hair or debris tangled around the brushes.
- Reinstall the side brushes by pressing them down until they click.
6.4 Cleaning Sensors
Wipe the anti-drop sensors (located on the bottom of the robot) and the anti-collision sensors (located on the front bumper) with a clean, dry cloth to ensure proper functionality.
Image: The Fmart C200 Robot Vacuum demonstrating its high precision detectors for anti-collision and anti-drop functionality.
6.5 Cleaning the Water Tank and Mopping Pad
- Remove the water tank from the robot.
- Empty any remaining water.
- Detach the mopping pad and wash it with water. Allow it to air dry completely before reattaching.
7. Troubleshooting
If you encounter any issues with your Fmart C200, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not power on | Low battery; Power button not pressed correctly | Charge the robot; Press and hold the power button for a few seconds. |
| Robot does not charge | Charging contacts not aligned; Charging station not powered | Ensure robot is properly docked; Check power connection to charging station. |
| Robot gets stuck frequently | Obstacles in cleaning path; Dirty sensors | Clear cables, rugs, and small objects; Clean all sensors. |
| Poor cleaning performance | Full dust bin; Clogged filters; Worn side brushes | Empty dust bin; Clean/replace filters; Clean/replace side brushes. |
| Mopping function not working | Empty water tank; Clogged water outlet | Fill water tank; Clean water tank and mopping pad. |
| App connection issues | Bluetooth not enabled; Incorrect Wi-Fi band (requires 2.4GHz) | Ensure Bluetooth is on; Connect to a 2.4GHz Wi-Fi network. |
If the problem persists, please contact Fmart customer support for assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Fmart |
| Model Name | C200 |
| Model Number | C200-WT |
| Suction Power | Up to 2800 Pa |
| Battery Life | 120-180 minutes |
| Battery Type | Lithium-ion |
| Dust Bin Capacity | 350 ml |
| Water Tank Capacity | 128 ml |
| Filter Type | Fabric, Cartridge |
| Robot Height | 85 mm |
| Obstacle Crossing Ability | Up to 15 mm |
| Control Type | App Control (Bluetooth, 2.4GHz Wi-Fi) |
| Item Weight | 3.35 Kilograms |
| Package Dimensions | 46.9 x 35 x 13.6 cm |
9. Warranty and Support
Fmart provides a standard warranty for this product. Please refer to the warranty card included in your package or visit the official Fmart website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or spare parts, please contact Fmart customer service through the contact information provided in your product documentation or on the official Fmart website.