acum MS309 Pro OBD2 Scanner with Check Engine Code Reader

Download PDF
Contents

Acum MS309 Pro OBD2 Scanner User Manual

Model: MS309 Pro OBD2 Scanner with Check Engine Code Reader

Brand: Acum

Introduction

This user manual provides detailed instructions for the operation and maintenance of your Acum MS309 Pro OBD2 Scanner. Please read this manual thoroughly before using the device to ensure proper and safe operation. This tool is designed to assist in diagnosing vehicle issues by reading and clearing diagnostic trouble codes (DTCs), performing battery tests, and displaying live data streams.

Safety Information

  • Always perform automotive repairs in a well-ventilated area.
  • Wear appropriate eye protection when working on vehicles.
  • Avoid contact with hot engine parts and moving components.
  • Do not connect or disconnect the scanner while the vehicle's ignition is on or the engine is running, unless specifically instructed.
  • Keep the device dry and away from extreme temperatures.

What's in the Box

  • Acum MS309 Pro OBD2 Code Scanner (1 unit)
  • User Manual (1 unit)

Product Overview

The Acum MS309 Pro is a compact and user-friendly OBD2 diagnostic tool. It features a clear display and intuitive buttons for easy navigation. The device connects directly to your vehicle's OBD2 port.

Acum MS309 Pro OBD2 Scanner front view

Image: Front view of the Acum MS309 Pro OBD2 Scanner, showing the display screen and control buttons.

Key Features:

  • Reads and Erases Diagnostic Trouble Codes (DTCs)
  • Battery Testing Functionality
  • I/M Readiness Status Check
  • Live Data Streaming
  • Views Freeze Frame Data
  • Retrieves Vehicle Information (VIN, CIN, CVN)
  • Supports multiple languages
Acum MS309 Pro OBD2 Scanner with feature icons

Image: The MS309 Pro OBDII Car Diagnostic Tool with icons illustrating its key functions: Read Codes, Erase Codes, Battery Tester, I/M Readiness, Live Data Streaming, Vehicle Information, Freeze Frame Data, and Engine Diagnosis.

Setup

  1. Locate the OBD2 Port: The OBD2 port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's service manual if you cannot locate it.
  2. Connect the Scanner: With the vehicle's ignition off, firmly plug the scanner's OBD2 connector into the vehicle's OBD2 port.
  3. Power On: Turn the vehicle's ignition to the "ON" position (engine off). The scanner will automatically power on and display the main menu. No external power source or battery is required for the scanner itself.

Operating Instructions

1. Reading and Erasing Codes

  1. From the main menu, use the OK button to select "Scan" or "Read Codes".
  2. The scanner will establish communication with the vehicle and display any stored Diagnostic Trouble Codes (DTCs).
  3. To erase codes, navigate to the "Erase Codes" option from the main menu or after viewing codes. Confirm the action when prompted. Note: Erasing codes will turn off the Check Engine Light, but the underlying issue must be resolved to prevent the code from reappearing.

2. Battery Tester

This function allows you to assess the health of your vehicle's battery.

Acum MS309 Pro OBD2 Scanner showing battery test function

Image: The MS309 Pro OBDII Car Diagnostic Tool displaying the battery test function, alongside an illustration of a car battery.

  1. From the main menu, select "BAT Test" or "Battery Tester".
  2. The scanner will display real-time battery voltage.
  3. It can also provide an assessment of battery performance and generator function.

3. Live Data Streaming

View real-time operational parameters of the vehicle's engine.

Acum MS309 Pro OBD2 Scanner showing live data streaming

Image: The MS309 Pro OBDII Car Diagnostic Tool displaying a diagnostic menu with options for Vehicle Info, Live PCM Data, and Battery Test, with a background graphic of a car's internal systems.

  1. Select "Live Data" or "Live PCM Data" from the menu.
  2. The screen will display various sensor readings such as engine RPM, coolant temperature, oxygen sensor voltage, and more.
  3. Use the navigation buttons to scroll through the data parameters.

4. Viewing Freeze Frame Data

When an emission-related fault occurs, the onboard computer records certain vehicle operating conditions at the time of the fault. This data is called Freeze Frame Data.

Acum MS309 Pro OBD2 Scanner showing freeze frame data

Image: The MS309 Pro OBDII Car Diagnostic Tool displaying the main menu with options for OBDII and BAT Life, overlaid with a diagram showing engine RPM, vehicle speed, fuel trim, engine load, fuel pressure, and coolant temperature, indicating recorded parameters when a fault occurs.

  1. Select "Freeze Frame" from the menu.
  2. The scanner will display the recorded parameters at the moment the fault code was set.

5. I/M Readiness Status

This function checks the readiness of the emission-related monitoring systems on the vehicle.

  1. Select "I/M Readiness" from the menu.
  2. The scanner will display the status of various monitors (e.g., Misfire Monitor, Fuel System Monitor, O2 Sensor Monitor) as "OK" (complete) or "INC" (incomplete).

6. Vehicle Information

Retrieve the Vehicle Identification Number (VIN), Calibration ID (CIN), and Calibration Verification Number (CVN).

  1. Select "Vehicle Info" from the menu.
  2. The scanner will display the available vehicle information.

Troubleshooting

ProblemPossible CauseSolution
Scanner does not power on.Loose connection; Vehicle ignition not on; Vehicle's OBD2 port fuse blown.Ensure the connector is firmly plugged in. Turn ignition to "ON" position. Check vehicle's fuse box for a blown fuse related to the OBD2 port.
Communication error with vehicle.Incorrect protocol; Vehicle not OBD2 compliant; Faulty cable.Verify vehicle is OBD2 compliant (most vehicles 1996 and newer). Ensure the cable is not damaged. Try on another OBD2 compliant vehicle if possible.
Cannot clear codes.Engine is running; Ignition is off; Underlying fault still present.Ensure engine is off and ignition is in the "ON" position. Codes cannot be cleared if the underlying issue causing the code is still active. Resolve the fault first.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. Keep the cable neatly coiled to prevent damage.
  • Software Updates: Check the manufacturer's website periodically for any available software updates for your model.

Specifications

ParameterValue
ModelMS309 Pro OBD2 Scanner with Check Engine Code Reader
Display128x64 pixel display
Operating Voltage9-16V (via vehicle OBD2 port)
Operating Temperature0 to 60°C (32 to 140°F)
Storage Temperature-20 to 70°C (-4 to 158°F)
Dimensions8.27 x 5.12 x 1.18 inches
Weight8.1 ounces
Supported ProtocolsAll OBDII protocols (including CAN)
CompatibilityMost 1996 and newer vehicles (OBD2 compliant)

Warranty and Support

Acum products are designed for reliability and performance. For warranty information and technical support, please refer to the official Acum website or contact their customer service. Keep your purchase receipt for warranty claims.

Manufacturer: Acum

Contact: Refer to the official Acum website for the latest support contact information.

© 2024 Acum. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.