Crosley Voyager CR8017U-DU1 Portable Vinyl Record Player Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Crosley Voyager CR8017U-DU1 Portable Vinyl Record Player. Please read all instructions carefully before use and retain this manual for future reference.

2. Safety Information

Observe the following safety precautions to prevent electric shock, fire, or damage to the unit:

• Do not expose the unit to rain or moisture.
• Do not block ventilation openings.
• Use only attachments/accessories specified by the manufacturer.
• Unplug the unit during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items listed below are included in your package:

• Crosley Voyager CR8017U-DU1 Turntable
• RCA-3.5mm Cable
• User Manual (this document)
• Warranty Card

4. Product Overview

Familiarize yourself with the components and controls of your record player.

Figure 1: Crosley Voyager CR8017U-DU1 with key components labeled.

Controls and Connections:

• Power/Volume Knob: Turns the unit on/off and adjusts volume.
• Pitch Control Knob: Adjusts the playback speed of the record.
• Function Switch: Selects between Phono (record player), Bluetooth In, or Bluetooth Out modes.
• Tone Arm: Holds the stylus and tracks the record grooves.
• Cueing Lever: Lifts and lowers the tone arm.
• Speed Switch: Selects playback speed (33 1/3, 45, or 78 RPM).
• Headphone Jack: For private listening with headphones.
• Aux In Jack: Connect external audio devices.
• RCA Output Jacks: Connect to an external stereo system.
• DC In Jack: Connect the power adapter.

5. Setup

1. Unpacking: Carefully remove the unit from its packaging. Retain the packaging for storage or shipping.
2. Power Connection: Connect the DC power adapter to the DC In jack on the back of the unit, then plug the adapter into a wall outlet.
3. Placement: Place the record player on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or vibration.
4. Dust Cover: Open the dust cover.

6. Operating Instructions

6.1 Playing a Record

1. Turn the Power/Volume knob clockwise to turn on the unit.
2. Set the Function Switch to the PHONO position.
3. Place a record on the turntable platter.
4. Select the appropriate speed (33 1/3, 45, or 78 RPM) using the Speed Switch.
5. Lift the tone arm using the Cueing Lever.
6. Move the tone arm over the desired track of the record.
7. Gently lower the tone arm onto the record using the Cueing Lever. The record will begin to play.
8. Adjust the volume using the Power/Volume knob.
9. Use the Pitch Control knob to fine-tune the playback speed if necessary.
10. To stop playing, lift the tone arm using the Cueing Lever and return it to the tone arm rest.

Figure 2: Placing a record on the turntable.

6.2 Bluetooth In (Streaming to Built-in Speakers)

Stream music from your Bluetooth-enabled device to the record player's built-in speakers.

1. Turn on the record player.
2. Set the Function Switch to the BT IN position. The Bluetooth indicator light will flash.
3. Enable Bluetooth on your external device (e.g., smartphone, tablet) and select "Crosley Voyager" from the list of available devices.
4. Once paired, the Bluetooth indicator light will stop flashing and remain solid.
5. Play music from your device. Audio will now play through the record player's speakers.

Figure 3: Streaming digital music via Bluetooth to the built-in speakers.

6.3 Bluetooth Out (Streaming to External Bluetooth Speakers)

Stream audio from your playing record to an external Bluetooth speaker.

1. Turn on the record player.
2. Set the Function Switch to the BT OUT position. The Bluetooth indicator light will flash.
3. Ensure your external Bluetooth speaker is in pairing mode.
4. The record player will automatically search for and connect to the nearest Bluetooth speaker. Once connected, the indicator light will stop flashing.
5. Play a record. Audio will now play through your external Bluetooth speaker.

Figure 4: Streaming vinyl through external Bluetooth speakers.

6.4 Auxiliary Input

Connect an external audio device (e.g., MP3 player, smartphone) using the 3.5mm Aux In jack.

1. Connect one end of a 3.5mm audio cable (not included) to your external device and the other end to the Aux In jack on the record player.
2. Set the Function Switch to the AUX IN position.
3. Play music from your external device. Audio will play through the record player's speakers.

6.5 Headphone Use

For private listening, plug headphones into the Headphone Jack. The built-in speakers will be muted.

Figure 5: Headphone Jack for private listening.

6.6 RCA Output

Connect the record player to an external stereo system or powered speakers using the RCA Output jacks.

1. Connect the RCA-3.5mm cable (included) to the RCA Output jacks on the back of the record player.
2. Connect the other end of the cable to the corresponding input on your external audio system.
3. Ensure your external system is set to the correct input.
4. Play a record. Audio will now play through your external system.

Figure 6: RCA Output connection.

7. Maintenance

7.1 Turntable Stylus

The stylus is a delicate component. Handle it with care. A worn stylus can damage records and produce poor sound quality. Replace the stylus after approximately 200-300 hours of use.

7.2 Cleaning the Unit

• Use a soft, dry cloth to clean the exterior of the unit.
• Do not use harsh chemicals or abrasive cleaners.
• For the stylus, use a soft brush to gently clean from back to front.

7.3 Cleaning Records

Always handle records by their edges. Clean records regularly with a soft, anti-static cloth to remove dust and debris, which can affect sound quality and stylus life.

8. Troubleshooting

If you experience issues with your record player, consult the following table for common problems and solutions.

9. Specifications

Figure 7: Product Dimensions.

10. Official Product Video

11. Warranty and Support

This product comes with a One Year Limited Manufacturer's Warranty. For warranty claims or technical support, please refer to the contact information provided on the included Warranty Card or visit the official Crosley website.