1. Product Overview
The ECCO 11 Series RefleXL® is a compact, low-profile LED warning light bar designed for various vehicle applications, including tow trucks, work trucks, and utility vehicles. It features a durable polycarbonate lens and an aluminum frame, offering robust performance in demanding environments. This light bar provides powerful warning signals with multiple flash patterns.
Figure 1: Top view of the ECCO 11-024CAC-E LED Light Bar, showcasing its sleek design and LED arrangement.
2. Safety Information
- Electrical Safety: Disconnect vehicle battery before installation. Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Mounting: Securely mount the light bar to prevent detachment during vehicle operation. Refer to local regulations regarding light bar placement and usage.
- Operation: Do not stare directly into the light bar when illuminated, as it can cause eye strain or temporary vision impairment.
- Professional Installation: For optimal safety and performance, professional installation by a qualified technician is recommended.
3. Package Contents
Verify that all components are present before beginning installation:
- ECCO 11-024CAC-E LED Light Bar (1 unit)
- Mounting Feet (set)
- Installation Hardware (screws, washers, nuts)
4. Specifications
| Feature | Detail |
|---|---|
| Model | 11-024CAC-E |
| Dimensions (L x W x H) | 25.25 x 5.75 x 3.55 inches |
| Weight | 5 pounds |
| Input Voltage | 12-24 Volts |
| Wattage | 32 watts |
| Lens Color | Amber, Dual-Color |
| Lens Material | Polycarbonate |
| Frame Material | Aluminum |
| Special Features | Waterproof (IP69K rating implied by certifications) |
| Flash Patterns | Up to 91 (dual-color models) |
| Temperature Range | -40°F to +149°F (-40°C to +65°C) |
| Certifications | SAE Class 1, California Title 13, R10, R65, CISPR 25, IP69K |
Figure 2: Dimensional view of the ECCO 11-024CAC-E LED Light Bar, indicating its length of 24 inches and height of 1.3 inches.
Figure 3: Overview of the ECCO 11-024CAC-E LED Light Bar's certifications, including SAE Class 1, California Title 13, R10, R65, CISPR 25, and IP69K, alongside a 5-year warranty badge.
5. Setup and Installation
The ECCO 11-024CAC-E LED Light Bar is designed for permanent mounting. Optional mounting solutions, such as a headache rack or magnetic mounts, may be available separately. Always ensure the mounting surface is strong enough to support the light bar and that the installation does not obstruct the driver's view or interfere with vehicle safety systems.
5.1 Mounting Instructions
- Select Mounting Location: Choose a location on your vehicle that provides optimal visibility for the light bar and allows for secure attachment. Consider local regulations regarding light bar placement.
- Prepare Mounting Surface: Clean the mounting surface thoroughly. If drilling is required, mark the drill points accurately using the light bar's mounting feet as a template.
- Secure Mounting Feet: Attach the provided mounting feet to the light bar using the supplied hardware. Then, secure the light bar assembly to the vehicle using appropriate fasteners, ensuring a tight and stable fit.
5.2 Wiring Instructions
- Disconnect Power: Before beginning any wiring, disconnect the vehicle's battery to prevent electrical shorts or damage.
- Identify Wires: The light bar will have specific wires for power, ground, and potentially pattern selection. Refer to the wiring diagram provided with the product packaging for exact wire functions.
- Connect Power: Connect the positive power wire from the light bar to a fused 12-24V power source in the vehicle. It is recommended to use a relay and switch for proper control and circuit protection.
- Connect Ground: Connect the ground wire from the light bar to a reliable chassis ground point on the vehicle.
- Pattern Control (if applicable): If your model supports multiple flash patterns, connect the pattern control wire(s) to a switch or controller as per the wiring diagram.
- Test Connections: Once all connections are made and insulated, reconnect the vehicle battery and test the light bar's functionality.
6. Operating Instructions
The ECCO 11-024CAC-E LED Light Bar is activated via the connected power switch. Depending on the model (single-color or dual-color), it offers a range of flash patterns.
Figure 4: The ECCO 11-024CAC-E LED Light Bar fully illuminated, displaying its amber warning light output.
6.1 Flash Pattern Selection
Dual-color models of the 11 Series RefleXL® support up to 91 distinct flash patterns. The method for changing patterns typically involves a dedicated control wire or a momentary switch connected to the pattern control input. Consult the specific wiring diagram included with your product for detailed instructions on how to cycle through and select desired flash patterns.
- Power On/Off: Use the installed power switch to turn the light bar on or off.
- Pattern Change: Momentarily activate the pattern control wire (e.g., touch to positive or ground, depending on design) to advance to the next flash pattern. Some systems may require holding the wire for a few seconds to reset to a default pattern.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ECCO LED Light Bar.
- Cleaning: Clean the polycarbonate lens periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the lens material.
- Inspection: Routinely inspect the light bar for any physical damage, loose mounting hardware, or frayed wiring. Address any issues promptly to prevent further damage or malfunction.
- Electrical Connections: Ensure all electrical connections remain secure and free from corrosion.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light bar does not illuminate. | No power, faulty wiring, blown fuse, incorrect voltage. | Check power connections, inspect fuse, verify input voltage (12-24V). |
| Incorrect or erratic flash patterns. | Faulty pattern control wiring, internal malfunction. | Verify pattern control wire connections. If issue persists, contact support. |
| Dim or flickering lights. | Low voltage, poor ground connection, damaged wiring. | Check vehicle's electrical system, ensure secure ground, inspect wiring for damage. |
9. Warranty and Support
The ECCO 11-024CAC-E LED Light Bar is backed by a 5-Year No-Hassle Warranty. This warranty covers defects in materials and workmanship under normal use.
For technical assistance, warranty claims, or further information, please contact ECCO customer support. Refer to the ECCO website or product packaging for the most current contact details.
ECCO Contact Information:
Website: www.eccoesg.com
Phone: Refer to ECCO's official website for regional support numbers.
