Aroepurt JSH-HDL Phone Case for Revvlry+ Plus - Instruction Manual

Introduction

This manual provides instructions for the proper installation, use, and maintenance of your Aroepurt JSH-HDL phone case, designed specifically for the Revvlry+ Plus. This case offers robust protection and enhanced functionality for your device.

1. Setup and Installation

Follow these steps to correctly install the phone case and its accessories:

1. Prepare Your Device: Ensure your Revvlry+ Plus phone is clean and free of dust or debris before installation.
2. Install the Case: Gently align your phone with the soft silicone frame of the case. Press the phone firmly into the case, ensuring all edges are securely seated within the frame. The hard PC back panel will provide additional rigidity.
3. Finger Ring Attachment (Optional): The adhesive metal finger ring support can be attached to the back of the case or used separately.
   • Clean the desired attachment area on the back of the case.
   • Peel off the protective film from the adhesive side of the finger ring.
   • Carefully position the ring and press firmly for at least 30 seconds to ensure a strong bond. Allow adhesive to cure for a few hours before heavy use.

Image 1.1: Proper installation of the phone into the case.

2. Operating Instructions

Utilize the features of your Aroepurt JSH-HDL phone case for enhanced usability:

• Shockproof Protection: The case features a combination of a hard PC back panel, a soft silicone frame, and four-corner shock airbags. This multi-layer design is engineered to absorb impacts and protect your device from drops and bumps. The case is also designed to be higher than the camera and screen for flat surface protection.
  

  Image 2.1: Illustration of the case's shock-absorbing design.

• Gold Glitter and Luminous Effect: The case incorporates a gold powder layer that produces a shining effect under light and sunlight. Additionally, it has a luminous effect, meaning it absorbs light and sunlight to produce a fluorescent glow in dark environments.
  

  Image 2.2: Detail of the gold glitter and luminous material layers.

• Finger Ring Support: The integrated metal finger ring rotates 360 degrees, providing a secure grip to prevent accidental drops and acting as a kickstand for hands-free viewing. It also aids in one-hand operation by allowing easier access to more screen areas.
  

  Image 2.3: Using the finger ring for enhanced grip and one-hand reach.
• Magnetic Car Mount Compatibility: The metal finger ring allows the case to be used with magnetic car mounts (car mount not included). Simply attach the case to a compatible magnetic car mount for secure phone placement while driving. Note: This case does not support wireless charging due to the metal ring.

3. Maintenance and Care

To ensure the longevity and appearance of your phone case, follow these care instructions:

• Cleaning: Use a soft, damp cloth to wipe down the case. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these can damage the case material or finish.
• Avoid Extreme Conditions: Do not expose the case to extreme temperatures or direct prolonged sunlight, which can affect the material integrity and luminous properties.
• Inspect Regularly: Periodically check the case for any signs of wear or damage, especially around the corners and the finger ring attachment point, to ensure continued protection.

4. Troubleshooting

If you encounter any issues with your phone case, refer to the following common solutions:

• Case Does Not Fit Correctly:

  Ensure that your phone model is indeed the Revvlry+ Plus. This case is specifically designed for this model. If you have a different phone model, the case may not fit properly, leading to misaligned ports or buttons. Double-check your phone's model number.

• Finger Ring Not Secure:

  If the finger ring feels loose or detaches, ensure the adhesive area on the case was clean and dry before application. Reapply with a new strong adhesive if necessary, ensuring firm pressure and adequate curing time.
• Luminous Effect Not Visible:

  The luminous effect requires exposure to light (sunlight or artificial light) to charge. Ensure the case has been exposed to sufficient light before expecting it to glow in the dark.

5. Specifications

6. Warranty and Support

For warranty information or technical support, please contact Aroepurt customer service through the retailer where the product was purchased. Please have your purchase details and product model number (JSH-HDL) ready when contacting support.