AMEYXGS Archery Compound Bow Instruction Manual

1. Safety Information

Archery can be a dangerous activity if proper safety precautions are not followed. Always prioritize safety to prevent injury to yourself and others. Read and understand all instructions before using this product.

• Never dry-fire the bow: Releasing the string without an arrow can cause severe damage to the bow and potential injury to the user.
• Always wear appropriate protective gear, including eye protection and an armguard.
• Ensure your shooting area is clear of people, animals, and obstructions. Be aware of your surroundings and what lies beyond your target.
• Inspect your bow and arrows before each use for any signs of damage or wear. Do not use damaged equipment.
• Keep fingers, clothing, and other objects clear of the bowstring and cams when drawing or releasing.
• Store the bow in a safe place, out of reach of children and unauthorized users.
• Seek professional guidance if you are new to archery or unsure about any aspect of bow operation or maintenance.

2. Package Contents

The AMEYXGS Archery Compound Bow Kit includes the following components:

• Compound Bow
• Bow Sight
• Arrow Rest
• Stabilizer
• Wrist Sling
• Allen Wrenches (for adjustments)
• 6 x Mixed Carbon Arrows
• Instruction Manual (this document)

For a visual guide to unboxing and identifying components, please refer to the video below:

3. Setup and Assembly

Follow these steps to assemble your compound bow and its accessories. Ensure you have the provided Allen wrenches for adjustments.

1. Attach the Bow Sight:

   Locate the mounting holes on the riser of the bow. Align the bow sight with these holes and secure it using the provided screws and Allen wrench. Ensure it is firmly attached but do not overtighten.

   

2. Attach the Arrow Rest:

   The arrow rest mounts on the opposite side of the riser from the sight. Secure it using the designated screw and Allen wrench. This component supports the arrow before and during the shot.

   

3. Attach the Stabilizer:

   Screw the stabilizer into the threaded hole at the front of the bow's riser. This helps to balance the bow and reduce vibration during the shot.

4. Attach the Wrist Sling:

   Thread the wrist sling through the designated attachment point near the grip. This prevents the bow from falling after release.

5. Adjust Draw Weight and Draw Length:

   The bow's draw weight (30-55 lbs) and draw length (24-29.5 inches) are adjustable. Use the provided Allen wrenches to make these adjustments. Refer to the diagram for specific adjustment points. No bow press is needed for these adjustments.

   

   

For a comprehensive visual guide on assembly and setup, please watch the video below:

4. Operating Instructions

Once your bow is assembled and adjusted, you are ready to begin shooting. Always ensure you are in a safe environment and wearing protective gear.

• Nocking the Arrow: Place the arrow on the arrow rest and attach the nock to the bowstring at the designated nocking point.
• Grip: Hold the bow firmly but relaxed, ensuring your hand is positioned correctly on the grip.
• Stance: Stand with your feet shoulder-width apart, perpendicular to the target.
• Drawing the Bow: Smoothly draw the bowstring back to your anchor point, using your back muscles rather than just your arm.
• Aiming: Use the bow sight to align your shot with the target.
• Release: Execute a smooth and consistent release of the bowstring.

For a visual demonstration of shooting the compound bow, please refer to the video below:

5. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your compound bow.

• String and Cable Care: Regularly inspect the bowstring and cables for fraying or wear. Apply bowstring wax periodically to protect them from moisture and friction.
• Limb Inspection: Check the limbs for any cracks, twists, or delamination. If any damage is found, discontinue use immediately.
• Cam and Axle Maintenance: Keep the cams and axles clean and free of debris. Apply a small amount of lubricant to the axles as recommended by an archery professional.
• Storage: Store your bow in a cool, dry place, away from extreme temperatures and humidity. A bow case is recommended for protection during storage and transport.
• Cleaning: Wipe down the bow with a soft, dry cloth after each use to remove dirt and moisture.

6. Troubleshooting

This section addresses common issues you might encounter with your compound bow.

If you encounter issues not listed here or if solutions do not resolve the problem, consult with a qualified archery technician.

7. Product Specifications

8. Warranty and Support

For specific warranty information and details regarding product support, please refer to the documentation included with your purchase or contact AMEYXGS customer service directly.

An official PDF user manual is also available for download: AMEYXGS Compound Bow User Manual (PDF).

For further assistance, visit the AMEYXGS Store on Amazon.