Gardena 13206-20

Gardena Micro-Drip-System T-Piece for Spray Nozzles

Model: 13206-20

1. Introduction

The Gardena Micro-Drip-System T-Piece for Spray Nozzles is an essential component for expanding and customizing your automatic watering system. Designed for connecting 13 mm pipes with a spray nozzle, this T-piece ensures efficient water distribution to your plants. Its innovative Quick & Easy connection technology allows for simple and secure installation, as well as easy disassembly for reuse.

Gardena Micro-Drip-System T-Piece for Spray Nozzles

Figure 1: Gardena Micro-Drip-System T-Piece for Spray Nozzles.

2. Product Features

3. Package Contents

The package includes:

4. Setup and Installation

Follow these steps to properly set up your Gardena T-Piece:

  1. Prepare Pipes: Ensure your 13 mm supply pipes are cut cleanly and are free of debris.
  2. Connect Pipes: Insert the ends of two 13 mm pipes into the side openings of the T-piece. Push firmly until you hear a distinct "click" sound, indicating a secure and sealed connection.
Connecting T-piece to pipe

Figure 2: Connecting the T-piece to a 13 mm pipe.

  1. Install Spray Nozzle: Insert the base of your spray nozzle into the central opening of the T-piece. Push down until it clicks into place.
Inserting spray nozzle into T-piece

Figure 3: Inserting a spray nozzle into the T-piece.

The self-explanatory symbols on the T-piece guide the correct orientation for pipe and nozzle connections.

5. Operating Instructions

Once installed, the T-piece facilitates the flow of water from your 13 mm supply pipes to the connected spray nozzle. When your Micro-Drip-System is activated (e.g., via a Master Unit), water will be directed through the T-piece to the spray nozzle, providing targeted irrigation to your plants.

Spray nozzle in operation with T-piece

Figure 4: Spray nozzle distributing water via the T-piece connection.

For optimal performance, ensure the T-piece is used in conjunction with a Gardena Master Unit (1000 or 2000) to maintain consistent water pressure and a reliable seal throughout your system.

6. Maintenance

The Gardena T-Piece is designed for durability and reusability. To disconnect or adjust the system:

Detaching T-piece from pipe

Figure 5: Detaching the T-piece from a pipe for adjustment or reuse.

7. Troubleshooting

If you encounter issues with your T-piece, consider the following:

8. Specifications

AttributeValue
BrandGardena
Model NameT-Joint for Spray Nozzles 13 mm
Item Model Number13206-20
ASINB0BNLL8Q76
MaterialKunststoff (Plastic)
Item Weight0.08 Kilograms (2.82 ounces)
Product Dimensions (L x W x H)3.15 x 1.26 x 0.94 inches
Number of Pieces5 (per package)
Maximum Pressure10 Bars
Volume Capacity13 mm
Fit TypeFlexible pipe connections
Gardena T-piece with dimensions and weight

Figure 6: Product dimensions and weight for the T-piece.

9. Important Safety Information

Warning: Small parts may be swallowed. Choking hazard. Keep out of reach of small children.

10. Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Gardena website. For technical support, spare parts, or further assistance, please contact Gardena customer service through their official channels. Always provide your product model number (13206-20) when seeking support.