ICE-WATCH IC021275

Download PDF
Contents

ICE-WATCH IC021275 Digit Pink Turquoise Digital Watch User Manual

Model: IC021275

1. Product Overview

The ICE-WATCH IC021275 Digit Pink Turquoise is a digital wrist watch designed for everyday use. It features a durable silicone case and strap, a clear digital display, and is water-resistant up to 10 ATM. This manual provides comprehensive instructions to help you understand and operate your watch effectively.

2. Watch Components

Familiarize yourself with the main components of your ICE-WATCH IC021275:

  • Display: Shows time, date, and other digital functions.
  • MODE Button: Cycles through different display modes (Time, Date, Alarm, Stopwatch).
  • RESET Button: Used to reset values or exit settings.
  • ST/SP Button: Starts/stops stopwatch or adjusts settings.
  • LIGHT Button: Illuminates the display for visibility in low light conditions.
  • Silicone Strap: Comfortable and durable wristband.
  • Case Back: Contains model information and water resistance rating.
Front view of the ICE-WATCH IC021275 Digit Pink Turquoise watch, showing the digital display and control buttons.

Figure 2.1: Front view of the watch, highlighting the digital display and button layout.

Side view of the ICE-WATCH IC021275 Digit Pink Turquoise watch, showing the pink silicone strap and turquoise accents.

Figure 2.2: Side view of the watch, illustrating the strap and case profile.

Back view of the ICE-WATCH IC021275 Digit Pink Turquoise watch, showing the stainless steel case back with model number and water resistance information.

Figure 2.3: Back view of the watch, displaying the stainless steel case back details.

3. Setup and Initial Configuration

3.1 Setting the Time and Date

  1. From the normal time display, press the MODE button three times to enter time setting mode. The seconds digits will begin to flash.
  2. Press the RESET button to advance the flashing selection to the hour digits.
  3. Press the ST/SP button to adjust the hour. Note the 'P' indicator for PM hours.
  4. Press the RESET button to advance the flashing selection to the minute digits.
  5. Press the ST/SP button to adjust the minutes.
  6. Continue pressing RESET to cycle through year, month, and day settings, adjusting each with the ST/SP button.
  7. Once all settings are correct, press the MODE button to exit the setting mode and return to the normal time display.

4. Operating Instructions

4.1 Display Modes

Press the MODE button to cycle through the following display modes:

  • Normal Time Display (Hour, Minute, Second, Day of Week)
  • Date Display (Month, Day)
  • Alarm Setting Mode
  • Stopwatch Mode

4.2 Using the Stopwatch

  1. Press the MODE button until 'ST' or 'STOPWATCH' appears on the display.
  2. Press the ST/SP button to start the stopwatch.
  3. Press the ST/SP button again to pause the stopwatch.
  4. Press the RESET button to reset the stopwatch to zero.

4.3 Using the Backlight

Press the LIGHT button to illuminate the display for a few seconds, allowing you to read the time in dark environments.

4.4 Water Resistance

This watch is water-resistant up to 10 ATM (100 meters). This means it is suitable for swimming, snorkeling, and showering. Do not operate buttons while the watch is submerged in water to prevent water ingress.

5. Maintenance

5.1 Cleaning Your Watch

To clean your watch, wipe it gently with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or seals. For silicone straps, mild soap and water can be used, followed by thorough rinsing and drying.

5.2 Battery Replacement

The watch requires 1 product-specific battery. When the display becomes dim or functions become erratic, it may be time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

6. Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Refer to Section 5.2 for battery replacement.
  • Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a common feature for this model). If the issue persists, a battery replacement might be needed, or there could be an internal malfunction.
  • Time is incorrect: Re-set the time and date following the instructions in Section 3.1. Check if the watch was exposed to strong magnetic fields.
  • Water inside the display: This indicates a breach in the watch's water resistance. Stop using the watch immediately and seek professional repair to prevent further damage.

7. Specifications

Model NumberIC021275
BrandICE-WATCH
Display TypeDigital
MovementQuartz
Case MaterialSilicone treated plastic
Strap MaterialSilicone
Crystal MaterialMineral
Case Diameter32 mm
Water Resistance10 ATM (100 meters)
Battery Type1 Product Specific battery required
ManufacturerIce-Watch
Country of OriginSpain

8. Warranty and Support

8.1 Warranty Information

This ICE-WATCH product comes with a 3-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear of the strap or battery.

8.2 Customer Support

For warranty claims, technical assistance, or further inquiries, please contact your authorized ICE-WATCH retailer or visit the official ICE-WATCH website for support contact information.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.