Cecotec Fast&Furious 6050 X-Treme Steam Iron

Introduction

Thank you for choosing the Cecotec Fast&Furious 6050 X-Treme Steam Iron. This advanced steam iron is designed to provide efficient and effortless ironing with its powerful 3100W motor, integrated automatic water pump, and innovative features like the Double Turbo Anodized Pro soleplate and Smart Auto OFF system. Please read this manual carefully before first use to ensure proper operation, maintenance, and safety.

Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Read all instructions before using the iron.
• Do not leave the iron unattended while it is connected to the power supply or on an ironing board.
• Unplug the iron from the electrical outlet before filling with water, emptying, cleaning, or when not in use.
• Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. Contact authorized service personnel for examination and repair.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Keep the iron and its cord out of reach of children.
• Never immerse the iron in water or other liquids.
• Use the iron only for its intended use.
• Do not use extension cords unless absolutely necessary. If an extension cord is used, it must be rated equal to or greater than the maximum rating of the iron.
• The iron must be used and rested on a stable surface.
• Do not touch hot surfaces. Use handles or knobs.

Product Components

Familiarize yourself with the different parts of your Cecotec Fast&Furious 6050 X-Treme Steam Iron.

Image: Overview of the Cecotec Fast&Furious 6050 X-Treme Steam Iron, highlighting its sleek design and key features like the water tank and control dial.

1. Water Spray Nozzle
2. Water Filling Inlet
3. Steam Control Dial (MAX/MIN)
4. Temperature Control Dial
5. Handle with Touch Sensor
6. Water Tank (Transparent)
7. Spray Button
8. Steam Boost Button
9. Self-Clean Button
10. Power Cord
11. Double Turbo Anodized Pro Soleplate
12. Precision Tip

Setup

Unpacking

• Carefully remove the iron and all accessories from the packaging.
• Remove any protective films or stickers from the soleplate or body of the iron.
• Retain the packaging for future storage or transport.

Filling the Water Tank

• Ensure the iron is unplugged from the power outlet.
• Set the steam control dial to the "Dry Ironing" or "No Steam" position.
• Open the water filling inlet cover.
• Using a measuring cup, slowly pour clean tap water into the water tank up to the "MAX" fill line. Do not overfill.
• Close the water filling inlet cover securely.

Image: A person demonstrating how to fill the water tank of the iron using a measuring cup, ensuring not to exceed the maximum fill line.

First Use

• Before first use, or if the iron has not been used for a long time, iron an old piece of fabric to ensure no residue or impurities are transferred to your garments.
• Some odor or slight smoke may occur during the first heating; this is normal and will dissipate quickly.

Operating Instructions

Temperature Setting

• Plug the iron into a suitable 220V electrical outlet.
• Turn the temperature control dial to the desired setting based on the fabric type (e.g., synthetic, silk, wool, cotton, linen). Refer to the fabric care labels on your garments.
• The indicator light will illuminate, indicating the iron is heating. It will turn off when the set temperature is reached.

Image: A detailed view of the iron's temperature and steam control dial, showing various settings for different fabric types.

Steam Ironing

• Ensure the water tank is filled.
• Set the temperature control to a steam-appropriate setting (usually cotton, linen, or higher). Steam will not be generated at low temperatures.
• Once the iron reaches the set temperature, adjust the steam control dial to the desired steam level (MIN to MAX).
• The integrated automatic water pump ensures continuous steam up to 75g/min.
• For stubborn wrinkles, press the Steam Boost button for a powerful burst of steam (up to 285g/min). Wait a few seconds between bursts.
• The touch sensor on the handle activates steam only when the iron is held, conserving water and energy.

Image: A hand guiding the iron over fabric, with visible steam emanating from the soleplate, demonstrating effective wrinkle removal.

Dry Ironing

• Ensure the water tank is empty or set the steam control dial to the "Dry Ironing" or "No Steam" position.
• Set the temperature according to the fabric type.
• Proceed with ironing as usual.

Spray Function

• The spray function can be used for both steam and dry ironing to dampen stubborn creases.
• Press the Spray button to release a fine mist of water onto the fabric.

Smart Auto OFF System

• The iron is equipped with a Smart Auto OFF overheat security system.
• If the iron is left stationary on its soleplate for approximately 30 seconds, or on its heel rest for approximately 8 minutes, it will automatically turn off to prevent accidents and save energy.
• To reactivate the iron, simply move it.

Maintenance and Care

Regular maintenance will prolong the life of your iron and ensure optimal performance.

Cleaning the Soleplate

• Ensure the iron is unplugged and completely cool.
• Wipe the soleplate with a damp cloth and a non-abrasive cleaner if necessary.
• Do not use abrasive scourers, harsh chemicals, or metal objects to clean the soleplate, as this can damage the Double Turbo Anodized Pro coating.

Image: The Cecotec iron resting on its heel, providing a clear view of its Double Turbo Anodized Pro soleplate, designed for smooth gliding.

Self-Clean Function (Anti-Calc)

• The iron features an integrated anti-calc system. For additional cleaning, use the self-clean function periodically (e.g., once a month).
• Fill the water tank to the MAX line.
• Set the steam control to "No Steam" and the temperature to MAX.
• Plug in the iron and wait for the indicator light to go out.
• Unplug the iron. Hold the iron horizontally over a sink.
• Press and hold the Self-Clean button. Hot water and steam will be expelled from the soleplate, carrying away mineral deposits.
• Gently shake the iron back and forth until the water tank is empty.
• Plug the iron back in and let it heat up to dry the soleplate.

Storage

• Ensure the iron is unplugged and completely cool.
• Empty any remaining water from the tank.
• Wrap the power cord neatly around the heel rest.
• Store the iron upright on its heel rest in a safe, dry place, out of reach of children.

Troubleshooting

Specifications

• Model: Cecotec Fast&Furious 6050 X-Treme
• Power: 3100 W
• Voltage: 220 Volts
• Continuous Steam: Up to 75 g/min
• Steam Boost: Up to 285 g/min
• Soleplate: Double Turbo Anodized Pro
• Features: Integrated Automatic Water Pump, Smart Auto OFF, Touch Sensor for Steam Control, Anti-Calc System
• Product Dimensions: 32 x 13.5 x 0.1 cm
• Item Weight: 1.39 kg

Warranty and Support

Cecotec products are manufactured to the highest quality standards. In the unlikely event of a defect arising from faulty materials or workmanship, your product is covered by the standard manufacturer's warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

For technical support, spare parts, or warranty inquiries, please contact Cecotec customer service through their official website or the retailer from whom you purchased the product. Do not attempt to repair the appliance yourself.