Product Overview
This BAIDE HOME 48-inch Fire Table is a modern outdoor patio fire pit designed to provide warmth and ambiance. It features a 50,000 BTU heat output, a rectangular burner, and comes with glass rocks and a lid to convert it into a functional table. A 20lb propane tank cover is also included.
Image: The BAIDE HOME 48-inch Fire Table shown on a modern patio setup with a sofa and chairs, and a separate propane tank cover.
Safety Information
Read all instructions before assembly and use. Failure to follow these instructions could result in fire, explosion, or burn hazard, which could cause property damage, personal injury, or death.
- Keep a safe distance from combustible materials.
- Use only approved fuel types (Liquefied Petroleum Gas).
- Never leave the fire pit unattended.
- Always follow local regulations regarding open flames.
- Ensure proper ventilation.
- Do not store a spare LP cylinder under or near this appliance.
- Do not use this appliance for cooking.
For detailed safety warnings, refer to the warning labels on the product and the full safety manual provided with your purchase.
Setup and Assembly
The fire table and propane tank cover are shipped in two separate boxes. It is possible that one package will arrive before the other.
Image: Illustration showing two separate boxes for the fire pit table and the propane tank cover, indicating they may arrive at different times.
Unpacking
Carefully remove all components from the packaging. Inspect for any damage. Retain packaging for future storage or transport.
Assembly Steps
- Place the fire table in the desired outdoor location. Ensure it is on a stable, level surface away from combustible materials.
- Open the access panel on the side of the fire table.
- Connect the pre-attached 10ft external gas hose to a standard 20lb propane gas tank (tank not included). Ensure all connections are tight.
- Place the propane tank inside the provided tank cover (if applicable) or in a secure, well-ventilated area away from the fire table.
- Carefully place the included glass rocks into the burner pan, ensuring not to cover the igniter or burner holes.
Image: A detailed view of the 304 stainless steel burner, 50,000 BTU heat output, easy electric ignition, and included glass rocks.
Natural Gas Conversion (Optional)
This fire table comes with a natural gas conversion kit. If converting to natural gas, it is highly recommended that a qualified professional performs the installation to ensure safety and compliance with local codes. Refer to the separate natural gas conversion instructions included with the kit.
Operating Instructions
Lighting the Fire Table
- Ensure the propane tank valve is fully open.
- Locate the control panel on the side of the fire table.
- Push and turn the control knob to the "LOW" position.
- Immediately press and hold the electronic igniter button until the flame ignites.
- Once lit, continue to hold the control knob for 10-15 seconds to allow the thermocouple to heat up. Release the knob.
- If the flame extinguishes, repeat the process.
Image: The control panel showing the igniter button and the "LOW" to "HIGH" flame adjustment knob.
Adjusting the Flame
Rotate the control knob between "LOW" and "HIGH" to adjust the flame height and heat output as desired.
Turning Off the Fire Table
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank when the fire table is not in use.
Video: An official product video demonstrating the fire table in operation, showing the flame and overall aesthetic.
Maintenance
Cleaning
- Allow the fire table to cool completely before cleaning.
- Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners.
- Periodically inspect the burner and igniter for debris and clean as necessary.
- Clean glass rocks with mild soap and water, rinse thoroughly, and allow to dry before placing back in the burner pan.
Storage
- When not in use, especially during inclement weather or off-season, cover the fire table with the provided protective cover.
Image: The fire table shown with its black protective cover, emphasizing protection when not in use.
- Disconnect the propane tank and store it in a well-ventilated outdoor area, away from direct sunlight and heat sources.
- If storing indoors, ensure the propane tank is removed and stored outdoors.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner will not light | No gas flow; Igniter not sparking; Air in gas line | Check propane tank valve; Check igniter battery (AA); Purge air from line by repeating lighting procedure |
| Low flame | Low gas pressure; Partially closed tank valve | Ensure tank valve is fully open; Check for kinks in gas hose |
| Flame goes out after lighting | Thermocouple not heating; Wind | Hold control knob longer after ignition; Consider a wind guard (sold separately) |
| Defective ignition | Faulty igniter switch or wiring | Contact customer support for replacement parts or service. |
Specifications
- Brand: BAIDE HOME
- Model: B0BNGG9BPX
- Product Dimensions: 47.63"D x 23.62"W x 14.5"H
- Item Weight: 88.5 Pounds
- Material: Stainless Steel (Burner), Powder-coated Steel (Frame)
- Finish Type: Electrophoretically Coated
- Shape: Rectangular
- Fuel Type: Liquefied Petroleum Gas (LP), Natural Gas (NG with conversion kit)
- Heat Output: 50,000 BTU
- Color: Flint Gray (Fire Table), Black/Carbon Gray (Tank Cover)
- UPC: 691189955962
Warranty and Support
For warranty information or technical support, please contact BAIDE HOME customer service.
Technical Support: service@baidehome.com
Visit the BAIDE HOME Store for more products and information.