CASTA DIVA CD-BT02 Non-Electric Bidet Seat Instruction Manual

1. Product Overview

The CASTA DIVA CD-BT02 is a non-electric bidet seat designed for elongated toilets, offering enhanced hygiene and comfort. This bidet seat features self-cleaning dual nozzles for effective front and rear washing, a soft-close lid and seat, and a quick-release mechanism for easy cleaning.

• No Electricity Required: Operates without electrical power, connecting directly to your existing water supply.
• Hygienic Cleansing: Equipped with self-cleaning dual nozzles for front and rear wash functions. Water spray volume is manually adjustable.
• Soft-Close Feature: Slow-closing hinges prevent slamming of the lid and seat, ensuring quiet operation and durability.
• Easy Installation: Designed for straightforward attachment to most elongated toilets.

2. Installation Guide

Follow these steps for proper installation of your CASTA DIVA CD-BT02 bidet seat.

2.1 Pre-Installation Checks

• Ensure your toilet is an elongated model. The bidet seat dimensions are 19.68" L x 14.56" W x 2.44" T.
• Confirm access to the toilet's water supply valve.

2.2 Step-by-Step Installation

1. Remove Existing Toilet Seat: Lift the hinge covers and use a screwdriver to remove the bolts holding the old seat in place. Remove the old seat.
2. Install Mounting Plate: Insert the rubber expansion nuts into the toilet bowl holes. Place the mounting plate over the holes and secure it with the provided screws. Tighten the screws to ensure the plate is firm.
3. Attach Bidet Seat: Slide the bidet seat onto the mounting plate until it clicks into place.
4. Connect Water Supply: Turn off the water supply to your toilet. Flush the toilet to drain the tank. Disconnect the existing water supply hose from the toilet tank. Install the T-valve (G15/16 for shutoff valve, G15/16 for toilet inlet valve, G1/2 for bidet hose) to the toilet fill valve. Connect the bidet hose from the T-valve to the bidet seat's water inlet. Reconnect the toilet's water supply hose to the T-valve.
5. Restore Water Supply: Slowly turn on the water supply to the toilet. Check for any leaks.

2.3 Installation Video

3. Operating Instructions

The CASTA DIVA CD-BT02 bidet seat features a simple manual control for its washing functions.

3.1 Using the Wash Functions

1. Select Wash Mode: Locate the side lever control on the right side of the bidet seat. Rotate the lever to select either the 'Bidet' (front wash) or 'Wash' (rear wash) function.
2. Adjust Water Pressure: Continue rotating the lever in the selected direction to increase the water pressure. Rotate back towards the center to decrease pressure or stop the spray.
3. Nozzle Self-Cleaning: The nozzles are designed to self-clean before and after each use.

3.2 Operation Video

4. Maintenance

Regular cleaning ensures optimal performance and hygiene of your bidet seat.

4.1 Cleaning the Bidet Seat

• Quick-Release for Easy Cleaning: The bidet seat features a quick-release button for easy removal from the toilet bowl. Press the button, then lift the seat straight up to detach it from the mounting plate.
• Clean the seat and toilet area with a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals that may damage the finish.
• Ensure the nozzles are clean. The self-cleaning function helps maintain nozzle hygiene.
• Reattach the seat by aligning it with the mounting plate and sliding it back until it clicks securely.

5. Troubleshooting

This section addresses common issues you might encounter with your bidet seat.

• Low Water Pressure: Ensure the water supply valve to the toilet is fully open. Check for any kinks in the bidet hose. Adjust the side lever fully to increase pressure.
• Leaks: Verify all connections (T-valve, bidet hose) are securely tightened. Ensure rubber washers are properly seated. Do not overtighten plastic connections.
• No Water Spray: Confirm the water supply is on and the side lever is correctly positioned for a wash function.
• Seat Not Secure: Ensure the mounting plate screws are tight and the bidet seat is fully slid onto the mounting plate until it clicks.

6. Specifications

7. Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact the seller directly. Keep your purchase receipt for any warranty claims.