1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Weiser Tavaris x Breton Front Door Lock and Handle Set. This handleset is designed for exterior doors, offering both keyed entry and enhanced security. It features a sleek, modern design with a Satin Nickel finish, complementing various home aesthetics.
The handleset includes a matching deadbolt with a 1-inch throw for robust security. It can be locked or unlocked using a key from the outside or a key/turnpiece from the inside. The product is ANSI/BHMA Grade 2 Certified, ensuring durability and performance.
Image 1.1: Weiser Tavaris x Breton Handleset, showcasing the exterior handle and deadbolt in Satin Nickel finish.
2. Package Contents
Before beginning installation, verify that all components are present in your package:
- Exterior Door Handle
- Interior Lever
- Deadbolt Assembly
- Latches (for both handle and deadbolt)
- Strikes (for both handle and deadbolt)
- Fasteners and Accessories
- 2 Keys
- SmartKey Tool
- Instruction Manual (this document)
Image 2.1: All included components of the handleset, including the exterior handle, interior lever, deadbolt, latches, strikes, keys, and SmartKey tool.
3. Installation
The Weiser Tavaris x Breton handleset is designed for easy installation, typically requiring only a screwdriver. The adjustable latch mechanism accommodates all standard door preparations.
3.1 Pre-Installation Check
- Ensure your door thickness and backset measurements are compatible with the handleset.
- Confirm the door is properly prepared with standard bore holes.
3.2 Step-by-Step Installation Overview
- Install the deadbolt latch into the door edge.
- Install the deadbolt cylinder and thumbturn assembly.
- Install the lower latch (spring latch) into the door edge.
- Attach the exterior handleset to the door.
- Install the interior lever assembly.
- Secure all components with the provided fasteners.
- Install the strike plates on the door frame.
For detailed visual instructions, refer to the full installation guide included in your package or visit the official Weiser support website.
Image 3.1: The handleset installed on a door, illustrating the exterior pull handle and deadbolt, and the interior lever and turnpiece.
Image 3.2: This handleset features a fully reversible design, allowing installation on both left-handed and right-handed doors.
4. Operation
4.1 Locking and Unlocking
- From the Exterior: Insert the key into the deadbolt cylinder and turn to lock or unlock.
- From the Interior: Use the turnpiece on the deadbolt to lock or unlock.
- The lower handle operates a spring latch and does not provide security locking.
4.2 SmartKey Security Technology
Your Weiser handleset is equipped with SmartKey Security, a re-key technology that allows you to re-key your lock yourself in seconds. This feature protects against advanced break-in techniques and provides convenience by allowing you to match your lock to an existing key.
Re-keying Instructions:
- Insert your functioning key into the cylinder and turn it 90 degrees clockwise.
- Insert the SmartKey tool fully and firmly into the SmartKey hole. Remove the SmartKey tool.
- Remove your functioning key.
- Insert your new key fully and firmly into the cylinder. Turn the new key 180 degrees counter-clockwise.
- Your lock is now re-keyed. Test the new key to ensure proper operation.
Image 4.1: Diagram illustrating the SmartKey re-keying process and highlighting security features such as kick-in, bump, pick, drill, and saw resistance.
5. Maintenance
To ensure the longevity and smooth operation of your Weiser handleset, follow these maintenance guidelines:
- Cleaning: Clean the handleset with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically apply a silicone-based lubricant to the latch and deadbolt mechanisms to maintain smooth operation. Do not use oil-based lubricants.
- Fasteners: Periodically check all mounting screws and fasteners to ensure they are tight. Do not overtighten.
6. Troubleshooting
If you encounter issues with your handleset, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not turn smoothly or is difficult to insert. | Dirt or debris in the cylinder; worn key; improper re-keying. | Clean the cylinder with compressed air. Try a new key. Re-key the lock following SmartKey instructions. |
| Deadbolt does not extend or retract fully. | Misalignment of strike plate; obstruction in door frame; loose fasteners. | Check strike plate alignment and adjust if necessary. Clear any obstructions. Tighten all fasteners. |
| Interior lever is loose or wobbly. | Loose mounting screws. | Tighten the screws securing the interior lever assembly. |
If the issue persists after attempting these solutions, please contact Weiser Customer Support.
7. Specifications
- Material: Metal or alloy
- Color: Satin Nickel
- Style: Tavaris x Breton
- Product Dimensions: 45.5L x 6.7W Centimetres
- Item Weight: 3.9 Pounds
- Exterior Finish: Satin Nickel (Brushed)
- Handle Type: Pull Handle
- Specific Uses: Exterior Door
- Lock Type: Key Lock
- Hand Orientation: Ambidextrous (Universal Handling)
- Special Features: ANSI/BHMA Grade 2 Certified, Adjustable Latch, SmartKey Technology
- Model Number: 9GLA94710-039
- GTIN/UPC: 059184444445
8. Warranty and Support
8.1 Manufacturer's Warranty
This Weiser product is backed by a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty information provided with your product or visit the official Weiser website.
8.2 Customer Support
For further assistance, technical support, or warranty claims, please contact Weiser Customer Support through their official website or the contact information provided in your product packaging.
9. Product Overview Video
Watch this official video for a comprehensive overview of Weiser products, highlighting key features and benefits, including SmartKey technology and various styles.
Video 9.1: An official Weiser brand video showcasing the range of products, including smart locks and handlesets, emphasizing security, technology, and convenience. This video demonstrates the SmartKey re-keying process and various design options.