Beautural 1-JU58NA01 Countertop Automatic Foaming Soap Dispenser User Manual

1. Introduction

Thank you for choosing the Beautural 1-JU58NA01 Countertop Automatic Foaming Soap Dispenser. This device is designed to provide a hygienic and convenient way to dispense foaming soap, enhancing cleanliness in your kitchen or bathroom. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Product Overview

Key Features:

• Hands-Free Operation: Equipped with infrared motion sensing technology for touchless dispensing.
• Adjustable Foam Volume: Two dispensing levels allow you to control the amount of foam.
• Versatile Soap Compatibility: Works with various liquid soaps (hand soap, shampoo, facial cleanser, dish soap). Note: Ordinary liquid soaps require dilution with 3-4 parts water.
• Fast Charging & Long Battery Life: Type-C USB charging (under 2 hours) provides over 10,000 uses on high level and 12,000 uses on low level.
• IPX5 Waterproof: Designed to resist water splashes, ensuring durability and easy cleaning.
• Self-Cleaning Function: Helps maintain hygiene and prolong product lifespan.

Components:

• Soap Dispenser Unit
• Type-C Charging Cable
• User Manual

Image: Overview of the dispenser's features including the infrared sensor, non-slip base, and clear soap reservoir.

3. Setup Guide

3.1 Charging the Device

1. Locate the Type-C charging port, usually protected by a silicone plug, at the back or bottom of the dispenser.
2. Insert the provided Type-C charging cable into the port and connect the other end to a USB power adapter (not included).
3. Charge the dispenser for less than 2 hours until the indicator light signals a full charge.

Image: The Type-C charging port located on the dispenser, showing the charging cable connected. A full charge takes less than 2 hours and provides over 10,000 uses.

3.2 Filling the Dispenser

1. Twist the top part of the dispenser counter-clockwise to open the soap reservoir.
2. If using ordinary liquid soap, dilute it with water in a ratio of 1 part soap to 3-4 parts water. Stir gently to mix.
3. Pour the prepared foaming soap solution into the reservoir. Do not overfill.
4. Twist the top part clockwise to securely close the dispenser.

4. Operating Instructions

4.1 Dispensing Soap

1. Ensure the dispenser is placed on a stable, flat surface.
2. Place your hand under the nozzle where the infrared sensor is located.
3. The dispenser will automatically detect your hand and dispense a measured amount of foaming soap.

4.2 Adjusting Foam Volume

The dispenser offers two levels of foam volume based on the distance of your hand from the sensor:

• For a smaller amount of foam, place your hand closer to the nozzle.
• For a larger amount of foam, place your hand slightly farther away from the nozzle.

Image: The dispenser showing how hand proximity to the sensor determines the volume of foam dispensed.

5. Maintenance and Care

5.1 Cleaning

• Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• The dispenser has a self-cleaning function. Refer to the product packaging or manufacturer's website for specific instructions on activating this feature.
• Ensure the charging port's silicone plug is securely in place to prevent water ingress during cleaning.

Image: The dispenser demonstrating its IPX5 waterproof capability, indicating resistance to water splashes.

5.2 Water Resistance

The dispenser is rated IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. However, it is not designed for submersion in water. Avoid prolonged exposure to excessive moisture.

6. Troubleshooting

If you encounter issues with your Beautural soap dispenser, please refer to the following common problems and solutions:

• Dispenser not activating: Ensure the device is charged. Check for any obstructions in front of the infrared sensor.
• No foam or weak foam: Verify that the soap reservoir is filled. If using liquid soap, ensure it is diluted correctly (1 part soap to 3-4 parts water). The nozzle might be clogged; try running the self-cleaning function or gently cleaning the nozzle.
• Indicator lights not working: The battery might be critically low. Recharge the device.
• Leaking: Ensure the top part of the dispenser is securely twisted closed. Check for any cracks or damage to the reservoir.

If the problem persists, please contact customer support.

7. Specifications

Image: The physical dimensions of the Beautural automatic foaming soap dispenser.

8. Warranty and Support

Specific warranty information for the Beautural 1-JU58NA01 Countertop Automatic Foaming Soap Dispenser is not provided in this manual. For detailed warranty terms, product support, or to contact customer service, please visit the official Beautural website or refer to the product packaging.

You can find more information and contact details on the Beautural Brand Store.