WENKO Libertà Shower Glider Instruction Manual

Introduction

Thank you for choosing the WENKO Libertà Shower Glider. This adjustable shower head holder is designed for easy installation on shower rods with diameters of 22 mm, 24 mm, or 25 mm. It features a convenient height adjustment mechanism, allowing you to position your shower head precisely. Made from durable ABS plastic with a chrome finish, it offers both functionality and a sleek appearance for your bathroom.

Safety Information

• Ensure the shower glider is securely fastened to the shower rod before attaching the shower head.
• Do not apply excessive force when adjusting the height or angle, as this may damage the product or the shower rod.
• Keep out of reach of children to prevent misuse or accidental injury.
• Regularly check the glider for any signs of wear or damage. Discontinue use if any damage is observed.

Package Contents

Please verify that all components are present before proceeding with installation:

• 1 x WENKO Libertà Adjustable Shower Head Holder (Chrome)
• Integrated adapters for 22/24/25 mm diameter shower rods

Setup and Installation

The WENKO Libertà Shower Glider is designed for tool-free installation without the need to remove your existing shower rod.

1. Prepare the Shower Rod: Ensure the section of the shower rod where you intend to install the glider is clean and free from soap residue or grime.
2. Open the Glider: Gently pull apart the two halves of the shower glider. It is designed to open wide enough to fit around the shower rod.
3. Position on Rod: Place the open glider around your shower rod. The glider is compatible with rod diameters of 22 mm, 24 mm, and 25 mm.
4. Close and Secure: Press the two halves of the glider firmly together until they click into place, securing it onto the shower rod. No tools are required for this step.

Operating Instructions

The WENKO Libertà Shower Glider allows for easy adjustment of your shower head's height and angle.

1. Attach Shower Head: Insert your shower head into the holder opening. Ensure it is seated firmly.
2. Adjust Height: To change the height of the shower head, press the integrated button located on the side of the glider. While holding the button, slide the glider up or down the shower rod to your desired position. Release the button to lock the glider in place.
3. Adjust Angle: The shower head holder can be tilted to adjust the spray angle of your shower head. Gently push or pull the shower head to achieve the desired angle.

Maintenance

To ensure the longevity and appearance of your WENKO Libertà Shower Glider, follow these maintenance guidelines:

• Cleaning: Clean regularly with a soft cloth and mild soap or a non-abrasive bathroom cleaner. Avoid using harsh chemicals, abrasive sponges, or scouring agents, as these can damage the chrome finish and plastic material.
• Drying: After cleaning, wipe the glider dry with a soft cloth to prevent water spots and maintain its shine.
• Inspection: Periodically inspect the glider for any signs of wear, cracks, or loose parts.

Troubleshooting

If you encounter any issues with your shower glider, refer to the following common problems and solutions:

• Glider slides down the rod:
  • Ensure the glider is fully closed and securely clicked into place around the shower rod.
  • Verify that the shower rod diameter is within the compatible range (22 mm, 24 mm, or 25 mm).
  • Clean the shower rod and the inside of the glider to remove any soap residue or mineral deposits that might reduce friction.
• Difficulty adjusting height:
  • Ensure the integrated button is fully pressed when attempting to slide the glider.
  • Check for any obstructions or debris inside the mechanism.
• Shower head does not stay angled:
  • Ensure the shower head is properly seated in the holder.
  • If the issue persists, the internal friction mechanism might be worn. Consider replacing the glider.

Specifications

Warranty and Support

WENKO products are manufactured to high-quality standards. This product comes with a 5-year warranty from the date of purchase, covering material and manufacturing defects. For warranty claims or support, please contact WENKO customer service.

For further information or to explore other WENKO products, please visit the official WENKO store:

Visit the WENKO Store