Giantex 20L Towel Warmer Bucket Instruction Manual

1. Introduction

Thank you for purchasing the Giantex 20L Towel Warmer Bucket. This manual provides essential information for the safe and efficient use of your new appliance. Please read all instructions carefully before operation and retain this manual for future reference. This towel warmer is designed to provide warm, cozy towels, bathrobes, blankets, and other cotton items, enhancing your comfort and relaxation.

2. Important Safety Instructions

• Read all instructions before using this appliance.
• Do not immerse the appliance in water or any other liquid.
• Ensure the voltage of the appliance matches your local power supply before plugging in.
• Always unplug the appliance from the power outlet when not in use and before cleaning.
• Do not operate the appliance with a damaged cord or plug, or if it malfunctions or has been damaged in any manner.
• Keep the power cord away from heated surfaces.
• Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
• Use the appliance only for its intended household purpose.
• Close supervision is necessary when any appliance is used by or near children.
• The exterior surface of the towel warmer may become warm during operation. Avoid direct contact with the interior surface when the "Hot Surface" indicator light is on.
• Only place dry, cotton-based items inside the warmer. Do not place wet items.

3. Package Contents

• Giantex 20L Towel Warmer Bucket
• Removable Lid with Handle
• Fragrance Holder (integrated into lid)
• Instruction Manual

4. Setup Guide

4.1 Unpacking

Carefully remove all components from the packaging. Inspect the unit for any signs of damage. Retain packaging materials for future storage or transport if needed.

4.2 Placement

Place the towel warmer on a stable, flat, and dry surface. Ensure it is away from water sources and flammable materials. The compact size and lightweight design allow for easy placement in bathrooms, spas, or other desired locations.

4.3 Power Connection

Plug the 3-prong power cord into a standard 120V/60Hz electrical outlet. The power cord is approximately 6 feet long, providing flexibility in placement.

5. Operating Instructions

5.1 Placing Items

Open the removable lid. Place dry towels, bathrobes, blankets, or other cotton items loosely inside the bucket. The 20L capacity can accommodate up to two 40" x 70" oversized bath towels.

5.2 Adding Fragrance (Optional)

Locate the fragrance holder on the inside of the lid. You can add a scent disc of your choice (scent disc not included) into this holder to infuse your warmed items with a pleasant aroma.

5.3 Power On and Heating

Close the lid securely. Press the On/Off button located on the front of the unit. The orange "Heating" indicator light will illuminate, signifying that the appliance has begun the warming process. The advanced heating technology allows the unit to heat up instantly, reaching a maximum temperature of 275°F within approximately 15 minutes.

5.4 Auto Shut-Off Feature

For safety and energy efficiency, the towel warmer bucket will automatically shut off after 60 minutes of continuous heating.

5.5 Hot Surface Indicator

When the interior surface of the warmer reaches 131°F, the red "Hot Surface" indicator light will illuminate. This serves as a reminder that the interior is hot and should not be touched directly to prevent burns.

6. Care and Maintenance

6.1 Cleaning

• Always unplug the appliance and allow it to cool completely before cleaning.
• Wipe the exterior and interior surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
• Do not immerse the towel warmer in water or any other liquid.

6.2 Storage

When not in use, store the towel warmer in a cool, dry place, away from direct sunlight and moisture.

7. Troubleshooting

• Appliance not turning on: Ensure the power cord is securely plugged into a working electrical outlet. Check if the outlet is receiving power.
• Items not warming sufficiently: Ensure the lid is closed properly. Make sure items are placed loosely inside and not packed too tightly, allowing heat to circulate. Allow the full 15 minutes for optimal heating.
• Indicator lights not working: If the unit is powered on but indicator lights are not functioning, discontinue use and contact customer support.

8. Product Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided in your purchase documentation or visit the official Giantex website. Keep your purchase receipt as proof of purchase for any warranty claims.