1. Product Overview
The WOLFBOX USB C Hardwire Kit OBD (Model OBD01) provides a reliable power supply solution for your dash cam or other Type-C powered devices. This kit connects directly to your vehicle's On-Board Diagnostics (OBD) port, converting 12V-24V vehicle power to a stable 5V/3A output. It is designed to prevent dash cam battery drain and supports parking monitor functionality.
Key Features:
- Wide Compatibility: Suitable for WOLFBOX dash cams and other Type-C devices, with 5V/3A output.
- Vehicle Voltage Input: Supports 12V-24V vehicle electrical systems.
- Easy Installation: Plug-and-play design using the OBD interface, minimizing vehicle circuit modifications.
- Low Voltage Protection: Automatically cuts power to prevent vehicle battery drain when voltage drops below 13V (recording continues for 5 minutes before shutdown).
- Parking Monitor Support: Enables continuous power for parking surveillance modes on compatible dash cams.
Image 1.1: WOLFBOX USB C Hardwire Kit OBD and included pry tool.
2. Product Specifications
Image 2.1: Visual representation of the WOLFBOX Hardwire Kit's key specifications.
| Feature | Detail |
|---|---|
| Product Dimensions | 7.48 x 1.42 x 5.91 inches |
| Item Weight | 3.84 ounces |
| Model Number | OBD01 (TypeC-HK-OBD) |
| Input Voltage | DC 12V-24V |
| Output Voltage/Current | DC 5V, 3A |
| Input Connector | OBD-II Port |
| Output Connector | Type-C USB Plug |
| Total Cable Length | 3 Meters (1 meter input, 2 meters output) |
| Working Temperature | -20°C to 70°C (-4°F to 158°F) |
| Low Voltage Protection | Activates when vehicle voltage drops below 13V (5 minutes recording before shutdown) |
| Compatible Dash Cams | WOLFBOX G840S, G930, G840H, G850, G850PRO, X5, i07, i17, X3, and other Type-C powered devices. |
3. Installation Guide
Follow these steps to properly install your WOLFBOX USB C Hardwire Kit OBD:
3.1. Check Compatibility
Ensure your dash cam or device uses a Type-C USB port for power and operates on 5V. The hardwire kit is compatible with most vehicles (except Tesla) with a standard OBD-II port.
Image 3.1: The hardwire kit is compatible with various car electronics.
3.2. Locate the OBD Interface
The OBD-II port is typically located in the driver's footwell area. Common locations include:
- Lower left of the trim panel under the steering wheel (most common).
- Above the accelerator pedal.
- Near the driver's side fuse box.
- In front of the shift lever.
Refer to your vehicle's manual if you have difficulty locating the port. Choose a location that allows for discreet cable routing.
Image 3.2: Common locations for the OBD interface in a vehicle.
3.3. Cable Routing and Connection
- Route the Cable: Use the included pry tool to tuck the Type-C USB cable along the windshield edge, A-pillar, and dashboard towards your dash cam. Route the OBD cable section towards the OBD port. Ensure cables do not obstruct airbags or driver's view.
- Connect to OBD Port: Plug the OBD connector of the hardwire kit firmly into your vehicle's OBD-II interface.
- Connect to Dash Cam: Plug the Type-C USB connector into your dash cam's power input port.
Image 3.3: Step-by-step guide for routing and connecting the hardwire kit.
4. Operating Instructions
Once installed, the WOLFBOX USB C Hardwire Kit OBD operates automatically with your vehicle and dash cam.
4.1. Initial Setup
- Start Vehicle: Turn on your vehicle's ignition. The dash cam should power on automatically.
- Dash Cam Settings: Access your dash cam's settings menu. Enable "Parking Monitor" or "Parking Surveillance" mode. Refer to your dash cam's specific instruction manual for detailed steps on activating this feature.
4.2. Parking Monitoring
When your vehicle is turned off, the hardwire kit will continue to supply power to your dash cam, enabling its parking monitor features (if configured). This allows your dash cam to record events while the vehicle is parked, providing 24-hour or 48-hour surveillance depending on your dash cam's capabilities.
Image 4.1: The hardwire kit enables continuous parking monitoring for your dash cam.
4.3. Low Voltage Protection
The hardwire kit features built-in low voltage protection to safeguard your vehicle's battery. If the vehicle's battery voltage drops below 13V (when the car is off), the kit will continue to supply power for approximately 5 minutes, then automatically cut power to the dash cam. This prevents excessive battery drain and ensures your vehicle can start.
5. Maintenance
The WOLFBOX USB C Hardwire Kit OBD is designed for durability and requires minimal maintenance. Follow these general guidelines:
- Regular Checks: Periodically inspect the cables and connectors for any signs of wear, damage, or loose connections.
- Cleanliness: Keep the OBD port and connectors free from dust and debris. Use a dry, soft cloth for cleaning.
- Avoid Harsh Environments: While designed for automotive use, avoid exposing the kit to extreme moisture or corrosive chemicals.
- Secure Installation: Ensure the cables remain securely tucked away and do not interfere with vehicle operation or safety features.
6. Troubleshooting
If you encounter issues with your WOLFBOX USB C Hardwire Kit OBD, refer to the following troubleshooting tips:
6.1. Dash Cam Not Powering On
- Check Connections: Ensure both the OBD connector and the Type-C USB connector are securely plugged in.
- Vehicle Ignition: Verify that your vehicle's ignition is on (for normal operation) or that the vehicle battery has sufficient charge (for parking mode).
- Dash Cam Functionality: Test your dash cam with its original power adapter to confirm it is working correctly.
- OBD Port Functionality: If possible, test the OBD port with another compatible device to ensure it is supplying power.
6.2. Parking Monitor Not Working
- Dash Cam Settings: Confirm that the parking monitor mode is correctly enabled in your dash cam's settings.
- Low Voltage Protection: The hardwire kit will cut power if the vehicle battery voltage drops too low (below 13V). If your vehicle is parked for extended periods or has a weak battery, this protection may activate, preventing continuous recording. Consider driving the vehicle regularly to maintain battery charge.
- Vehicle Battery Health: A weak or old vehicle battery may not hold sufficient charge for extended parking monitoring, triggering the low voltage protection prematurely.
6.3. Intermittent Power
- Loose Connections: Re-check all connections for tightness. Vibrations during driving can sometimes loosen plugs.
- Cable Damage: Inspect the cable for any visible damage or kinks that might interrupt power flow.
If these steps do not resolve the issue, please contact WOLFBOX customer support for further assistance.
7. Warranty and Support
WOLFBOX is committed to providing high-quality products and customer satisfaction.
- Warranty: This product typically comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
- Return Policy: A 7-day return policy is generally offered. Returns on defects are accepted.
For technical support, warranty inquiries, or any other questions, please contact WOLFBOX customer service:
- Email: service@wolfbox.com
- Phone: +1 888 296 8399
Image 7.1: WOLFBOX Warranty and Service contact details.
