1. Product Overview
This manual provides instructions for the ELEGANT Pivot Shower Door, Model FP32-CO. This semi-frameless shower door measures 32 inches wide by 72 inches high, featuring a 1/4 inch (6mm) clear tempered glass panel and matte black hardware. Designed for small bathrooms, its single-panel swing door offers a walk-in opening of 25 inches and can swing outward up to 90 degrees for flexible space utilization. The door includes waterproof seal strips with magnetic elements to prevent water leakage and an adjustable width mechanism for precise fitting.
Image 1: ELEGANT Pivot Shower Door in a bathroom setting.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in injury or property damage.
- Glass Safety: The shower door features 1/4 inch (6mm) clear tempered glass, which is ANSI Z97.1 certified. While tempered glass is designed to be safer, it can still break if subjected to sharp impact. Handle with care.
- Professional Installation: Professional installation is recommended to ensure proper fitting and safety.
- Tools: Use appropriate tools for installation. Wear safety glasses and gloves.
- Weight: The shower door components can be heavy. Exercise caution and seek assistance when lifting or positioning glass panels.
- Sealing: Ensure all seals are properly installed and cured to prevent water leakage.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | ELEGANT |
| Model Number | FP32-CO |
| Dimensions (W x H) | 32 inches x 72 inches |
| Walk-in Opening | 25 inches |
| Glass Thickness | 1/4 inch (6mm) |
| Glass Type | Clear Tempered Glass (ANSI Z97.1 certified) |
| Hardware Finish | Matte Black |
| Adjustable Width | 31.5 to 33 inches (0.75 inch adjustment on each side) |
| Door Type | Pivot Swing |
| Item Weight | 54 Pounds |
4. Setup and Installation
This section provides a general guide for installing your ELEGANT Pivot Shower Door. For detailed visual instructions, please refer to the official installation video below. Ensure all parts are present and undamaged before beginning installation.
4.1. Installation Video Guide
Video 1: Official ELEGANT Pivot Shower Door Installation Steps. This video demonstrates the complete installation process for the FP series shower enclosure, including marking, drilling, assembly, and sealing.
4.2. Key Installation Steps
- Prepare the Wall: Position the wall profile (S10) vertically on the wall according to your model size. Mark the wall through the pre-drilled holes on the profile. Ensure marks are not too close to tile edges.
- Drill Holes: Drill holes at the marked positions using a 6mm (0.2362 inch) drill bit. Insert wall plugs (S02) into the drilled holes using a hammer.
- Attach Wall Profiles: Secure the wall profile to the wall with screws (S03). Repeat this process for the wall profile on the opposite side.
- Insert Fixed Panel: Insert the fixed glass panel into the wall profile. Insert the second profile (S09) into the other side of the fixed panel. The distance between wall profiles can be adjusted to fit your needs.
- Secure Panels: Secure the fixed panels with wall profiles using screws (S04, S05). Place screw covers over the screws for a finished look.
- Install Bottom Water Retaining Strip: Install the bottom water retaining strip (S12) along the base of the fixed panel.
- Install Magnetic Water Retaining Strips: Install the magnetic water retaining strips (S07, S08) on the edges of the glass panels.
- Install Handles: Attach the handles (S11) to the moving glass panels.
- Apply Sealant: Apply silicone sealant to the outside edges of the profiles. Allow at least 24 hours for the sealant to dry completely before using the shower.
4.3. Reversible Installation
The ELEGANT Pivot Shower Door is designed for reversible installation, allowing it to be configured for either a left-hand or right-hand opening to suit your bathroom layout.
Image 2: Reversible installation options for the pivot shower door.
4.4. Width Adjustment
The shower door features an adjustable design, allowing for up to 0.75 inches of adjustment on each side (total 1.5 inches) to accommodate varying shower opening widths (31.5 to 33 inches). This ensures a snug and secure fit.
Image 3: Detail of the width adjustment feature.
4.5. Ground Adjustment
The door includes a ground adjustment feature to compensate for uneven surfaces, ensuring the door remains level and operates smoothly.
Image 4: Ground adjustment mechanism for leveling.
5. Operating Instructions
To operate your ELEGANT Pivot Shower Door:
- Opening/Closing: Use the stainless steel handle to gently push or pull the door open and closed. The door is designed to pivot smoothly.
- Magnetic Seal: The magnetic strips integrated into the seals ensure the door closes securely and helps prevent water from spilling out of the shower area.
- Full Opening: The door can swing outward up to 90 degrees, providing ample walk-through space.
Image 5: Stainless steel handle for easy operation.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your shower door.
- Cleaning Glass: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can scratch the glass or damage the finish.
- Cleaning Hardware: Wipe down metal hardware (matte black finish) with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Checking Seals: Periodically inspect the bottom water retaining strip and magnetic seals for wear or damage. Replace if necessary to maintain water tightness.
- Silicone Sealant: Check the silicone sealant around the profiles for any signs of degradation or mold. Reapply sealant if needed.
Image 6: Magnetic strip for secure door closure and water retention.
Image 7: Bottom seal strip for effective water retention.
7. Troubleshooting
If you encounter issues with your ELEGANT Pivot Shower Door, consider the following common solutions:
- Water Leakage:
- Check if the bottom water retaining strip and magnetic seals are properly installed and free from damage.
- Inspect the silicone sealant along the wall profiles. Reapply if there are gaps or cracks.
- Ensure the door is closing completely and the magnetic strips are engaging.
- Door Not Closing Properly:
- Verify that the wall profiles are plumb and the door is level. Adjust if necessary using the ground adjustment feature.
- Check for any obstructions preventing the door from closing fully.
- Stiff Door Movement:
- Ensure hinges are clean and free of debris.
- Lubricate hinges with a silicone-based lubricant if needed.
8. Warranty and Support
ELEGANT products are designed for high quality and durability. For any questions or assistance with your ELEGANT Pivot Shower Door, please refer to the following:
- Customer Support: Our service representatives are available to help you with any questions.
- Online Orders: For help with online orders, please access "Your Account" > "Order Detail" > "Message Center" on the platform where you made your purchase.
- Direct Contact: You may also reach us through sunnyshowerusa@gmail.com.
- Returns: This product is returnable until January 31, 2026. Please check the specific return policy of your retailer.
