YAMAZAKI 6007 Under Table Storage Rack Instruction Manual

Product Overview

The YAMAZAKI 6007 Under Table Storage Rack is designed to provide additional storage space beneath tables or desks without the need for drilling. It utilizes tension rods for installation, offering a convenient solution for organizing items such as remote controls, tissues, and other small essentials. This rack helps to keep your tabletop clear and organized by utilizing unused vertical space.

Image 1: The YAMAZAKI 6007 Under Table Storage Rack in white, shown from an angled perspective.

Setup Instructions

1. Prepare Tension Rods: Ensure you have two tension rods that are compatible with the rack's dimensions (approximately 0.8 inches / 2 cm in diameter and at least 9.8 inches / 25 cm in length). The load capacity of each tension rod should be sufficient to support the rack and its contents.
2. Position the Rack: Place the storage rack on top of the two tension rods. The rack is designed to rest securely on the rods.
3. Install Tension Rods: Extend the tension rods to fit snugly between the underside of your table/desk and a stable surface (e.g., another part of the table structure or a wall). Adjust the tension rods to create a firm and secure installation.
4. Secure the Rack: Once the tension rods are securely in place, ensure the storage rack is stable and does not wobble. The rack should be positioned to allow easy access to its contents.

Image 2: An underside view illustrating how the storage rack rests on two tension rods, which are then secured under a table surface.

Image 3: A hand demonstrating the adjustment of a tension rod to ensure a secure fit for the storage rack.

Operating Instructions

• Storing Items: Place remote controls, small books, stationery, or other frequently used items into the rack. The rack provides a convenient, out-of-sight storage solution.
• Tissue Dispensing: If using for tissues, place a standard tissue box inside the rack. Tissues can be pulled out from the opening at the bottom of the rack for easy access.

Image 4: The storage rack in use, neatly holding remote controls and a tissue box under a table, demonstrating its organizational capability.

Image 5: A hand demonstrating how to pull a tissue from the designated opening at the bottom of the storage rack, designed for convenient access.

Maintenance

• Cleaning: Wipe the rack with a soft, damp cloth. For stubborn dirt, a mild detergent can be used. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Inspection: Periodically check the tension rods to ensure they remain securely installed and have not loosened over time. Re-adjust if necessary to maintain stability.

Troubleshooting

Problem: The storage rack is unstable or falls.

Solution: Ensure both tension rods are properly installed and tightened to create sufficient pressure against the table surface. Verify that the tension rods are compatible with the rack's weight and the items stored. The rack itself weighs approximately 0.62 kg (22.2 oz), and the maximum recommended load capacity for the tension rods (combined) should be considered.

Problem: Difficulty pulling tissues from the bottom opening.

Solution: This can sometimes occur, especially with a full tissue box or certain tissue brands. Try adjusting the position of the tissue box inside the rack. If the issue persists, gently pull the tissue from the opening. As the tissue box empties, dispensing usually becomes smoother.

Specifications

Image 6: A technical diagram illustrating the precise dimensions of the YAMAZAKI 6007 Under Table Storage Rack.

Warranty and Support

For warranty information or product support, please refer to the documentation provided with your purchase or contact YAMAZAKI customer service directly. Contact details can typically be found on the manufacturer's official website or product packaging.

Note: This manual provides general instructions. Specific warranty terms and support procedures may vary by region and retailer.