1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Fenge Dual Monitor Stand. Designed to enhance your workspace ergonomics and organization, this 42.5-inch wood desk shelf offers a stable platform for two monitors and integrated storage solutions. Please read this manual thoroughly before assembly and use to ensure proper setup and longevity of your product.
2. Safety Information
- Ensure all components are securely fastened during assembly. Loose parts can lead to instability.
- Do not exceed the maximum load capacity of 88 lbs (40 kg). Overloading can cause damage to the stand and potential injury.
- Place the monitor stand on a stable, level surface to prevent tipping.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Avoid placing hot items directly on the surface to prevent damage to the finish.
3. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Image: All components of the Fenge Dual Monitor Stand laid out for assembly.
- Top Shelf (MDF)
- Lower Shelf (MDF)
- Aluminum Legs (4 pieces)
- Connecting Brackets/Supports
- Assembly Hardware (screws, dowels, rubber pads)
- Assembly Tool (Allen key)
4. Setup and Assembly
Assembly typically takes 5-8 minutes. Follow these steps carefully:
- Attach Legs to Top Shelf: Secure the four aluminum legs to the designated points on the underside of the top shelf using the provided screws and Allen key. Ensure they are firmly tightened.
- Install Connecting Brackets: Attach the connecting brackets to the underside of the top shelf, aligning them with the pre-drilled holes.
- Position Lower Shelf: Carefully place the lower shelf onto the connecting brackets. Ensure it sits flush and is properly aligned.
- Secure Lower Shelf: Fasten the lower shelf to the connecting brackets using the remaining screws.
- Apply Rubber Pads: Attach the rubber pads to the bottom of the aluminum legs to prevent scratching your desk surface and enhance stability.
Image: Assembly diagram illustrating the connection points for the stand's components.
Video: A demonstration of the Fenge monitor stand's assembly process and design features.
5. Operating Instructions (Usage)
The Fenge Dual Monitor Stand is designed to optimize your workspace with ergonomic benefits and integrated storage.
- Monitor Placement: Place up to two monitors on the top shelf. The 5.7-inch height helps elevate your screens to an ergonomic viewing level, reducing neck and shoulder strain.
- Storage Organization: Utilize the lower shelf and integrated compartments for storing office accessories, laptops, keyboards, and other desk items. This helps maintain a tidy and clutter-free desktop.
- Cable Management: The stand includes cable management slots to help route and organize your power and data cables, contributing to a cleaner setup.
- Device Holder: A universal device holder slot is provided for tablets or smartphones, keeping them upright and accessible.
Image: The Fenge Dual Monitor Stand supporting two monitors and organizing various desk items.
Image: A visual comparison demonstrating how the stand improves desktop organization.
Video: A short video showcasing the Fenge monitor stand in a home office setting, emphasizing its quality and organizational benefits.
6. Maintenance
To maintain the appearance and functionality of your Fenge Dual Monitor Stand, follow these simple maintenance guidelines:
- Cleaning: Wipe the MDF surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Dusting: Regularly dust the stand with a dry, soft cloth to prevent dust buildup.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary to maintain stability.
- Avoid Moisture: While the surface is water-resistant, avoid prolonged exposure to excessive moisture. Wipe up spills immediately.
7. Troubleshooting
If you encounter any issues with your Fenge Dual Monitor Stand, refer to the following common solutions:
- Stand is Wobbly:
- Ensure all screws are fully tightened.
- Verify that the stand is placed on a flat, even surface.
- Check that the rubber pads are correctly installed on all four legs.
- Parts Missing or Damaged:
- Review the 'Package Contents' section to confirm all items were expected.
- If parts are missing or damaged upon arrival, contact customer support for assistance.
- Difficulty Assembling:
- Refer to the 'Setup and Assembly' section and the provided video for visual guidance.
- Ensure you are using the correct hardware for each step.
8. Specifications
Detailed specifications for the Fenge Dual Monitor Stand:
Image: Dimensional drawing of the Fenge Dual Monitor Stand.
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 42.5 x 9.3 x 5.7 inches (1080 x 235 x 145 mm) |
| Item Weight | 18.06 pounds |
| Load Capacity | 88 lbs (40 kg) |
| Material | MDF (Engineered Wood) + Aluminum |
| Color | White |
| Assembly Required | Yes |
| Form Factor | Dual Monitor Stand Riser |
Image: Detail of the stand's construction, highlighting the MDF panel and aluminum feet.
9. Warranty and Support
Fenge is committed to providing high-quality products and customer satisfaction. If you experience any quality issues or transport damage, you are eligible for unconditional return and refund services. For any questions or concerns regarding your Fenge Dual Monitor Stand, please contact our customer support team. We are dedicated to resolving any issues promptly.
