Mattel Jurassic World Indoraptor Mask Instruction Manual

Introduction

This manual provides instructions for the Mattel Jurassic World Indoraptor Mask (Model HPH28). This mask is designed for immersive dinosaur role-play, featuring authentic Indoraptor design, light projection, and sound effects. It is suitable for users aged 4 years and up.

Safety Information

WARNING: Not suitable for children under 36 months.

WARNING: Contains a button battery. Refer to the battery placement instructions for proper handling. Button batteries can be dangerous if ingested.

What's Included

• 1 Jurassic World Indoraptor Mask

Setup

Battery Installation

The Indoraptor Mask requires button batteries for its light and sound features. Locate the battery compartment, typically secured with a small screw, on the inside of the mask. Use a small Phillips head screwdriver to open the compartment. Insert the required button batteries, ensuring correct polarity (+/-). Close the compartment securely with the screw.

Adjusting the Mask

The mask features an adjustable strap at the back to ensure a comfortable and secure fit. Gently pull or loosen the strap to fit the user's head. Ensure the mask sits comfortably without obstructing vision or breathing.

The Indoraptor mask features an adjustable head strap for a secure fit.

Operating Instructions

Activating Roar Sounds

The mask is equipped with movie-authentic roar sounds. To activate the sounds, open the mask's jaw. The jaw mechanism is designed to move in sync with the user's mouth movement, triggering the roar sound effects.

Using the Tracker Light

A red tracker light is located at the left temple of the mask. This light projects a dinosaur target image, simulating tracking 'prey'. To activate the light, locate the small button or switch near the tracking gear and press it. The light will project a red dinosaur silhouette.

The Indoraptor mask projecting a red dinosaur silhouette from its tracking gear.

A detailed view of the red dinosaur image projected by the mask's tracking light.

Maintenance

To clean the mask, wipe it with a damp cloth. Do not submerge the mask in water or use harsh chemicals, as this may damage the electronic components and finish. Store the mask in a cool, dry place away from direct sunlight when not in use.

Troubleshooting

No Sound or Light

• Check Batteries: Ensure batteries are correctly installed and are not depleted. Replace with new button batteries if necessary.
• Battery Compartment: Verify the battery compartment is securely closed.

Jaw Mechanism Not Functioning Smoothly

• Obstructions: Check for any foreign objects or debris that might be blocking the jaw's movement.
• Proper Fit: Ensure the mask is worn correctly and the adjustable strap is not too tight or loose, which could affect the jaw mechanism.

Specifications

Warranty and Support

This product is sold without an explicit warranty. For any product-related inquiries or support, please refer to the contact information provided on the product packaging or visit the official Mattel website.