1. Product Overview
The ELS PET 1L No-Spill Pet Water Bowl is designed to provide a clean and controlled drinking experience for your pets, preventing spills and slowing down their water intake. Its innovative floating disk mechanism ensures your pet's mouth stays dry and floors remain clean.
Image 1.1: ELS PET 1L No-Spill Pet Water Bowl highlighting its main benefits.
2. Product Components
The ELS PET 1L No-Spill Pet Water Bowl consists of three main components, designed for easy assembly and cleaning:
- Fixed Frame: The top ring that secures the floating board.
- Floating Board: The central disk that controls water access and prevents splashing.
- 1L Water Bowl: The main reservoir for water.
Image 2.1: Detachable components for easy cleaning.
3. Setup Instructions
Follow these steps to assemble your ELS PET 1L No-Spill Pet Water Bowl:
- Ensure all components (water bowl, floating board, fixed frame) are clean and dry.
- Place the floating board inside the 1L water bowl.
- Position the fixed frame over the floating board, aligning it with the edges of the water bowl. Press down gently until it is securely in place.
- Fill the bowl with fresh water. The floating board will rise with the water level.
Image 3.1: The assembled water bowl, ready for use.
4. Operating Instructions
The ELS PET water bowl is designed for intuitive use by your pet:
- Slow Drinking: When your pet drinks, their tongue presses down on the floating board, allowing a controlled amount of water to surface through the central opening. This design helps prevent rapid drinking, reducing the risk of choking or vomiting.
- No-Spill Design: The floating board and the surrounding edge strip effectively prevent water from splashing out of the bowl, keeping your floors dry and clean.
- Wet Mouth Prevention: The controlled water access minimizes the area of water exposed, helping to keep your pet's muzzle and fur dry.
Image 4.1: A dog using the anti-spill water bowl.
Image 4.2: The bowl helps slow down drinking and prevents wet floors.
5. Maintenance and Cleaning
Regular cleaning is essential to maintain hygiene and prolong the life of your pet's water bowl. The bowl's design allows for easy disassembly and cleaning.
- Disassembly: Carefully remove the fixed frame, then lift out the floating board from the water bowl.
- Cleaning: Wash all three components (water bowl, floating board, fixed frame) with mild soap and warm water. Use a soft brush or sponge to remove any residue, hair, or debris.
- Rinsing: Rinse all parts thoroughly to ensure no soap residue remains.
- Drying: Allow all components to air dry completely before reassembling.
- Frequency: It is recommended to clean the bowl daily or every other day, depending on usage and water quality.
Image 5.1: The floating board is separable for easy cleaning and helps filter debris.
6. Key Features
- Anti-Slip Stability: The base of the bowl is equipped with four anti-slip rubber pads, ensuring the bowl remains stable during use and prevents accidental sliding or tipping.
- Safe and Durable Material: Constructed from high-quality, non-toxic, and odorless ABS and PP materials, ensuring safety for your pets. The materials are BPA-free.
- 1 Liter Capacity: Provides ample water for your pet's daily hydration needs, reducing the frequency of refills.
- Versatile Use: Suitable for various environments, including indoor use, outdoor use, and travel in vehicles.
Image 6.1: Anti-slip design for enhanced stability.
Image 6.2: Anti-slip strips help prevent movement and spills.
Image 6.3: Made from BPA-free plastic, filtering impurities for safe pet use.
Image 6.4: Dimensions and 1L capacity of the water bowl.
Image 6.5: Multi-occasion use of the floating water bowl.
7. Troubleshooting
If you encounter any issues with your ELS PET 1L No-Spill Pet Water Bowl, please refer to the following common solutions:
- Water not flowing or pet not drinking:
- Ensure the bowl is filled with sufficient water.
- Check if the floating board is stuck or obstructed by debris. Disassemble and clean all components.
- Verify that the fixed frame is correctly seated and not pressing too tightly on the floating board.
- Some pets may need time to adjust to the new drinking mechanism. Encourage them gently.
- Water spilling or leaking:
- Ensure the fixed frame is properly installed and sealed around the floating board.
- Check for any cracks or damage to the bowl or components.
- Do not overfill the bowl beyond the recommended level.
- Ensure the bowl is placed on a flat, stable surface and the anti-slip pads are clean.
- Difficulty disassembling for cleaning:
- Apply gentle, even pressure when removing the fixed frame. Avoid excessive force.
- If components are wet, dry them slightly to improve grip.
8. Specifications
| Brand | ELS PET |
| Model Number | 1L |
| Capacity | 1 Litre |
| Product Dimensions | 22.5 cm (L) x 18.5 cm (W) x 7.8 cm (H) |
| Weight | 600 g |
| Material | Acrylonitrile Butadiene Styrene (ABS), Polypropylene (PP) |
| Special Feature | Anti-slip, No-Spill, Slow Drinking |
9. Warranty and Support
Information regarding product warranty and customer support was not provided in the available data. Please refer to the product packaging or the retailer's website for specific warranty details and contact information for support.
