1. Important Safety Information
Please read and understand all instructions before assembling and using this bunk bed. Keep this manual for future reference.
- Weight Capacity: The upper bunk has a maximum weight capacity of 175 lbs. The lower bunk has a maximum weight capacity of 275 lbs. Do not exceed these limits.
- Guardrails: The upper bunk is equipped with guardrails on all four sides. Ensure guardrails are properly installed and secured before use.
- Ladder Safety: Always use the provided ladder for accessing the upper bunk. Ensure the ladder is securely attached.
- Mattress Thickness: For the upper bunk, the mattress thickness should not exceed 6 inches to ensure adequate guardrail height. For the bottom bunk, the mattress thickness should not exceed 8 inches.
- Assembly: This product requires assembly by at least two adults. Do not attempt to assemble alone.
- Regular Inspection: Periodically check all connections and fasteners to ensure they are tight and secure. Tighten as necessary.
- Ventilation: Ensure adequate ventilation around the bunk bed.
- No Jumping: Do not allow jumping on the bunk bed.
2. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Image: Exploded view of the bunk bed showing all individual parts and hardware required for assembly. This includes the main frame pieces, bed slats, ladder, and two under-bed storage drawers.
The package includes all necessary hardware and tools for assembly. A detailed parts list will be provided in the separate assembly guide.
3. Setup Instructions
Assembly is required for this bunk bed. It is recommended that two adults perform the assembly, which typically takes approximately 40 minutes.
- Unpack Components: Carefully unpack all parts and hardware from the boxes. Place them on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list (usually found in a separate assembly guide) to identify each component.
- Assemble Frame: Follow the step-by-step instructions in the assembly guide to construct the main bed frames for both the upper and lower bunks. Ensure all bolts and screws are tightened securely.
- Install Slats: Attach the bed slats to both the upper and lower bunk frames. Ensure they are evenly spaced and securely fastened.
- Attach Ladder: Securely attach the ladder to the designated position on the bunk bed frame.
- Assemble Drawers: Assemble the two storage drawers according to the instructions and slide them into place under the bottom bunk.
- Final Check: Before use, double-check all connections to ensure they are tight and the bed is stable.
For detailed, step-by-step visual instructions, please refer to the dedicated assembly manual included with your product.
4. Operating Instructions
Using the Bunk Bed Configuration
In its standard bunk bed configuration, the upper bed is accessed via the integrated ladder. The lower bed provides a comfortable sleeping space with two integrated storage drawers.
- Ensure the ladder is always in place when accessing the upper bunk.
- The guardrails on the upper bunk are designed to prevent falls. Do not remove them.
- The two drawers under the bottom bed can be pulled out for storage of bedding, toys, or other items.

Image: The bunk bed in its assembled form, with the two under-bed storage drawers partially pulled out, demonstrating their functionality and capacity.
Converting to Two Twin Daybeds
This bunk bed can be separated into two individual twin-size daybeds, offering versatility for different room layouts or as your needs change.
- Remove Ladder: Carefully detach the ladder from the bunk bed frame.
- Separate Bunks: With the help of another adult, carefully lift the upper bunk off the lower bunk.
- Position Beds: Place each twin bed in your desired location. The lower bunk will retain its headboard and footboard, while the upper bunk will form a second twin bed with its own headboard and footboard.
- Re-attach Drawers (Optional): The storage drawers can remain under one of the twin beds or be used independently.

Image: The bunk bed disassembled into two separate twin-size daybeds, demonstrating the product's convertible feature. The storage drawers are visible under one of the beds.
5. Maintenance
Proper maintenance will ensure the longevity and safety of your bunk bed.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and fasteners. Tighten any loose connections to maintain structural integrity.
- Wood Care: Protect the wood finish from direct sunlight and extreme temperature changes. Use coasters or pads under items to prevent scratches.
- Drawer Maintenance: Ensure drawer slides are clean and free of debris for smooth operation.
6. Troubleshooting
If you encounter any issues with your bunk bed, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose hardware connections. | Inspect all bolts and screws. Tighten any that are loose. Ensure all parts are correctly aligned. |
| Drawers do not slide smoothly. | Debris in drawer slides; misaligned drawers. | Clean drawer slides. Re-align drawers if necessary, ensuring they are properly seated on their tracks. |
| Squeaking noises. | Loose connections; friction between wood parts. | Tighten all hardware. If squeaking persists, apply a small amount of furniture wax or silicone spray to contact points between wood components. |
| Missing parts during assembly. | Packaging error. | Contact TMEOSK customer support with your model number and a description of the missing parts. |
7. Specifications
Detailed specifications for the TMEOSK Twin Over Twin Bunk Bed (Model 00522AAP).
- Product Type: Bunk Bed
- Size: Twin Over Twin
- Color: Grey
- Material: Solid Pine Wood, Plywood, MDF
- Overall Product Dimensions (L x W x H): 75.1" x 41.1" x 66.9"
- Upper Bed Weight Capacity: 175 LBS
- Bottom Bed Weight Capacity: 275 LBS
- Recommended Upper Mattress Thickness: 6"
- Recommended Bottom Mattress Thickness: 8"
- Overall Product Weight: 181 LBS
- Assembly Required: Yes (Approx. 40 minutes, 2 people)
- Included Components: Bunk Bed Frame, Ladder, 2 Storage Drawers, Slats

Image: A technical drawing illustrating the precise dimensions of the bunk bed, including overall length, width, height, and internal measurements for each bunk and drawers.
8. Warranty and Support
TMEOSK stands behind the quality of its products. For specific warranty information, please refer to the warranty card included with your purchase or visit the official TMEOSK website.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TMEOSK customer support:
- Customer Service: Refer to your purchase documentation for contact details.
- Online Support: Visit the TMEOSK official website for FAQs and support resources.
Please have your model number (00522AAP) and purchase date available when contacting support.