Craftmade Table Lamp Model 86268 Instruction Manual

1. Important Safety Instructions

Please read all instructions carefully before assembling and using this product. Retain this manual for future reference.

• Ensure the power is disconnected before installation, cleaning, or bulb replacement.
• This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• Use only the specified bulb type and wattage to avoid overheating or damage.
• Do not operate the lamp with a damaged cord or plug.
• Keep flammable materials away from the lamp when in use.

2. Package Contents

Verify that all components are present before beginning assembly:

• Table Lamp Base (Carved Painted Brown)
• Linen Hardback Shade
• Harp and Finial (pre-assembled or separate)
• Power Cord (Black)

Note: Bulb is not included and must be purchased separately.

3. Setup and Assembly

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and stable surface.
2. Attach Harp (if separate): If the harp (the U-shaped wire frame) is not already attached to the lamp base, slide its two ends into the saddle on the lamp socket until they click into place.
3. Install Bulb: Screw a single E26 medium base bulb (maximum 100W) into the lamp socket. Do not overtighten. Ensure the bulb is fully seated.

   Image: Lamp base with harp and socket visible, ready for bulb and shade.

4. Place Shade: Position the linen hardback shade onto the harp. The shade should rest on the top of the harp.
5. Secure Finial: Screw the finial (the decorative cap) onto the threaded rod at the top of the harp to secure the shade in place. Hand-tighten only.
6. Position Lamp: Place the assembled lamp on a stable, level surface. Ensure the power cord is not pinched or obstructed.

   Image: The Craftmade Table Lamp fully assembled and ready for use.

4. Operating Instructions

1. Connect to Power: Plug the lamp's power cord into a standard 120V AC electrical outlet.
2. Turn On/Off: Locate the switch on the lamp socket or cord. Operate the switch to turn the lamp on or off.

5. Maintenance

• Cleaning the Base: Disconnect power before cleaning. Wipe the carved painted brown resin base with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

  Image: Detailed view of the lamp's carved resin base.

• Cleaning the Shade: The linen hardback shade can be gently dusted with a soft brush or a lint roller. For minor spots, dab with a slightly damp cloth and allow to air dry completely.

  Image: Close-up of the linen shade texture.

• Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 medium base bulb (max 100W).

6. Troubleshooting

Lamp Does Not Turn On:

• Check Power Connection: Ensure the lamp is securely plugged into a functional electrical outlet. Test the outlet with another device.
• Check Bulb: Verify that the bulb is screwed in tightly and is not burnt out. Replace the bulb if necessary.
• Check Switch: Ensure the lamp's switch is in the 'ON' position.

Lamp Flickers:

• Check Bulb Tightness: Ensure the bulb is screwed in firmly.
• Replace Bulb: The bulb may be faulty or nearing the end of its lifespan. Try a new bulb.
• Check Power Source: Ensure the outlet provides consistent power.

If troubleshooting steps do not resolve the issue, please contact customer support.

7. Specifications

8. Warranty Information

This Craftmade Table Lamp Model 86268 comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

9. Customer Support

For further assistance, technical support, or warranty inquiries, please contact Craftmade customer service.

Visit the official Craftmade website for contact information and additional resources:

Craftmade Official Store Page