VONROC EH518AC

VONROC EH518AC 2000W Ceramic Fan Heater

User Manual

1. Introduction

Thank you for choosing the VONROC EH518AC 2000W Ceramic Fan Heater. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions carefully before use and keep them for future reference.

This ceramic fan heater is designed to provide supplemental heating for indoor spaces such as offices, studies, living rooms, bedrooms, kitchens, garages, or storage areas. Its compact and modern design ensures it integrates well into various environments.

2. Safety Instructions

WARNING: To reduce the risk of fire, electric shock, or injury, always follow these basic precautions:

  • Read all instructions before using this heater.
  • Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water is present.
  • Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • To disconnect heater, turn controls to OFF, then remove plug from outlet.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
  • Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
  • Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
  • This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
  • Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

3. Product Features

  • Refined design suitable for any interior.
  • Fast-heating ceramic element and fan ensure rapid heat distribution.
  • Capable of heating rooms up to approximately 20m².
  • 1.6m long power cable allows connection to higher outlets.
  • Adjustable temperature range: 16-37°C.
  • Three heat settings for versatile use.

4. Package Contents

The package typically includes:

  • 1 x VONROC EH518AC Ceramic Fan Heater
  • 1 x User Manual

5. Setup

  1. Unpacking: Carefully remove the heater from its packaging. Retain the packaging for future storage or transport.
  2. Placement: Place the heater on a firm, level surface. Ensure there is at least 0.9 meters (3 feet) of clear space around the heater from any combustible materials (e.g., furniture, curtains, paper). Do not place the heater directly below a power outlet.
  3. Power Connection: Plug the power cord directly into a suitable 230V AC wall outlet. Do not use extension cords or power strips.
Front view of the VONROC EH518AC ceramic fan heater with digital display and control buttons.

Figure 1: Front view of the heater showing the digital display and control panel.

Rear view of the VONROC EH518AC ceramic fan heater showing the main power switch and air intake.

Figure 2: Rear view of the heater with the main power switch.

6. Operating Instructions

The heater features a digital display and control buttons on the top panel.

  1. Main Power Switch: Locate the main power switch at the rear of the unit (refer to Figure 2). Flip it to the 'ON' position.
  2. Power On/Off: Press the Power button (⏻) on the control panel to turn the heater ON or OFF. The digital display will illuminate when the unit is on.
  3. Adjusting Temperature: Use the + and - buttons to set your desired temperature between 16°C and 37°C. The display will show the set temperature.
  4. Selecting Heat Mode: Press the Mode button (M) to cycle through the three available heat settings:
    • Low Heat: For gentle warmth.
    • Medium Heat: For moderate heating.
    • High Heat: For rapid and maximum heating.
  5. Automatic Shut-off: The heater is equipped with an overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool down for 30 minutes, then plug it back in and restart. If the issue persists, contact customer support.
  6. Tip-Over Protection: The heater will automatically turn off if it is accidentally tipped over. Place it upright on a stable surface to resume operation.

7. Maintenance

Regular cleaning and proper storage will help maintain the performance and longevity of your heater.

  • Cleaning: Always unplug the heater and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents. Do not immerse the heater in water.
  • Air Intake/Outlet: Periodically vacuum the air intake and outlet grilles to remove dust and lint buildup. Ensure these areas are clear for optimal airflow.
  • Storage: When not in use, store the heater in a cool, dry place, preferably in its original packaging.

8. Troubleshooting

ProblemPossible CauseSolution
Heater does not turn on.
  • No power to the unit.
  • Main power switch is off.
  • Overheat protection activated.
  • Tip-over switch activated.
  • Check if the power cord is securely plugged into a working outlet.
  • Ensure the main power switch at the rear is in the 'ON' position.
  • Unplug, wait 30 minutes for cooling, then restart.
  • Place the heater upright on a stable surface.
Heater produces insufficient heat.
  • Low heat setting selected.
  • Room size exceeds heater capacity.
  • Air intakes/outlets are blocked.
  • Select a higher heat mode (Medium or High).
  • Ensure the heater is appropriate for the room size (up to 20m²).
  • Clean any dust or obstructions from the air intakes and outlets.
Heater makes unusual noise.
  • Dust or debris in the fan.
  • Unit not on a stable surface.
  • Unplug and clean the fan area carefully.
  • Ensure the heater is placed on a flat, stable surface.

9. Specifications

SpecificationDetail
BrandVONROC
Model NumberEH518AC
Power2000W
Voltage230 Volts
Number of Heat Settings3
Temperature Range16-37°C
Heating MethodForced Air (Ceramic)
Product Dimensions (L x W x H)23 x 22 x 24 cm
Item Weight1.98 Kilograms
Power SourceElectric Cable
Recommended UseIndoor, Office, Various Rooms
Mounting TypeTabletop
Diagram showing the dimensions of the VONROC EH518AC ceramic fan heater: 19 cm depth, 16 cm width, and 17 cm height.

Figure 3: Product dimensions of the EH518AC heater.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official VONROC website. Keep your proof of purchase for any warranty claims.

No official product videos were found for this specific model in the provided data.

© 2023 VONROC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.