1. Introduction
Thank you for choosing the Vente-unique JUANITO Bunk Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bunk bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
The JUANITO bunk bed is designed to optimize space in children's rooms, featuring two 90 x 190 cm sleeping areas, an integrated wardrobe, and two large storage drawers. Its reversible design allows for flexible room configuration.
Image 1.1: The Vente-unique JUANITO Bunk Bed with integrated storage in a child's bedroom setting.
2. Safety Information
WARNING: The top bunk is not suitable for children under 6 years of age due to the risk of falls.
- Always ensure the bunk bed is assembled correctly and all fasteners are tightened securely before use.
- Regularly check all bolts and screws to ensure they remain tight. Retighten as necessary.
- Do not allow children to play on or under the bunk bed without supervision.
- Ensure the mattress used on the top bunk does not exceed the maximum recommended thickness of 19 cm to maintain the effectiveness of the safety barrier.
- The maximum weight capacity for each bed is 75 kg. Do not exceed this limit.
- Use only the ladder provided for access to the top bunk.
- Keep the area around the bunk bed clear of obstacles.
- This product is designed for indoor use only.
3. Setup and Assembly
Assembly of the Vente-unique JUANITO Bunk Bed requires two adults. Please ensure you have sufficient space and all components are present before starting. The bed can be assembled with the wardrobe and ladder on either the left or right side, offering flexibility for your room layout.
3.1 Unpacking and Component Check
- Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Verify that all parts listed in the packaging contents are present. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
3.2 Assembly Steps (General Guidelines)
Detailed assembly instructions with diagrams are included in the product packaging. The following are general steps:
- Assemble the main bed frames for both the lower and upper bunks.
- Attach the integrated wardrobe and storage unit to the main bed structure. Remember that this unit is reversible.
- Install the safety barrier for the top bunk.
- Assemble and attach the ladder securely to the top bunk.
- Insert the panel bed bases into both bunk frames.
- Assemble the two large drawers and slide them into their designated positions under the lower bunk.
- Place the 90 x 190 cm mattresses onto both bed bases. Ensure the top bunk mattress does not exceed 19 cm in height.
Image 3.1: The JUANITO bunk bed with its integrated wardrobe and drawers open, illustrating the storage capacity.
Image 3.2: Front view of the JUANITO bunk bed with all storage compartments closed.
4. Operating Instructions
4.1 Using the Bunks
- The lower bunk is suitable for children of all ages, provided they can safely use a standard bed.
- The upper bunk is intended for children aged 6 years and older. Always use the provided ladder for access.
- Ensure the safety barrier on the top bunk is always in place.
4.2 Using the Integrated Storage
- Wardrobe: The integrated wardrobe features a hanging rail and shelves for clothing and other items. The doors open via a batiente (swinging) mechanism.
- Drawers: The two large sliding drawers located under the lower bunk provide ample space for toys, bedding, or other belongings. Ensure drawers are closed fully when not in use.
Image 4.1: Detail of the ladder and lower bunk area, showing the integrated shelving.
5. Maintenance
Proper maintenance will ensure the longevity and safety of your Vente-unique JUANITO Bunk Bed.
- Cleaning: Clean the surfaces of the bunk bed with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the melamine finish.
- Fastener Checks: Periodically inspect all bolts, screws, and connections. Tighten any loose fasteners to maintain structural integrity.
- Mattress Care: Follow the care instructions provided with your mattresses. Rotate and flip mattresses regularly to ensure even wear.
6. Troubleshooting
If you encounter any issues with your bunk bed, refer to the following common troubleshooting tips:
- Squeaking Noises: Squeaking often indicates loose fasteners. Check and tighten all bolts and screws, especially around the bed frame joints.
- Drawers Sticking: Ensure the drawer runners are clean and free of debris. Check that the drawers are assembled correctly and are not overloaded.
- Stability Concerns: If the bed feels unstable, re-check all assembly steps, ensuring all components are correctly aligned and all fasteners are fully tightened. Ensure the bed is placed on a flat, level surface.
For issues not resolved by these steps, please contact Vente-unique customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model | JUANITO |
| Brand | Vente-unique |
| Sleeping Dimensions (each bed) | 90 x 190 cm |
| Overall Dimensions (L x D x H) | 275 cm x 108 cm x 150 cm |
| Material | Particle board (Melamine finish) |
| Colors | White, Oak, Pink |
| Max. Weight Capacity (per bed) | 75 kg |
| Max. Mattress Height (top bunk) | 19 cm |
| Storage Type | Integrated wardrobe, 2 sliding drawers |
| Reversible Assembly | Yes (wardrobe/ladder orientation) |
| Included Components | Bunk bed frame, integrated wardrobe, 2 drawers, 2 panel bed bases, 2 mattresses (ZEUS classic foam) |
Image 7.1: The JUANITO bunk bed shown with two included mattresses.
Image 7.2: Detail of the ZEUS classic foam mattress included with the bunk bed.
8. Warranty and Support
For warranty information, missing parts, or technical support, please contact Vente-unique customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can also visit the official Vente-unique brand store for more information and support: