Vente-unique VELONA

Vente-unique VELONA Bridge Bed with Storage and LEDs (160 x 200 cm) - Instruction Manual

Model: VELONA

1. Introduction

This instruction manual provides essential information for the safe and efficient use of your Vente-unique VELONA Bridge Bed. This 160 x 200 cm bed frame is designed with integrated storage solutions, including drawers, niches, shelves, and a wardrobe, along with LED lighting for enhanced ambiance. Please read this manual thoroughly before assembly and use, and retain it for future reference.

Vente-unique VELONA Bridge Bed with integrated storage and LED lighting, shown in a bedroom setting.

Image 1.1: The VELONA Bridge Bed, showcasing its integrated design with overhead storage, side compartments, and under-bed drawers.

2. Safety Warnings

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

  • Assemble with caution, strictly following the provided instructions.
  • Do not exceed a load of 120 kg on the bed frame.
  • Exercise care around sharp edges during assembly and use to prevent cuts or injuries.
  • Ensure all fasteners are securely tightened before use and periodically check for looseness.
  • Keep small parts and packaging materials away from children to prevent choking hazards.
  • Do not climb on or hang from the overhead storage units.
  • Only use the bed for its intended purpose.

3. Assembly Instructions

The Vente-unique VELONA Bridge Bed requires assembly. It is recommended that two adults perform the assembly. Ensure you have sufficient space and all components are present before beginning.

3.1. Required Tools (Not Included)

  • Phillips head screwdriver
  • Hammer
  • Measuring tape
  • Level

3.2. Unpacking and Component Check

Carefully unpack all boxes and lay out the components on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Refer to the included parts list to verify all components are present and undamaged. If any parts are missing or damaged, contact customer support before proceeding.

3.3. Assembly Steps (General Guidance)

  1. Assemble the Bed Frame: Begin by assembling the main bed frame structure, including the headboard and footboard. Secure all connections as per the detailed diagrams in your specific assembly guide.
  2. Install Under-Bed Drawers: Attach the runners and assemble the two under-bed drawers. Ensure they slide smoothly into position.
  3. Construct the Bridge Unit: Assemble the overhead bridge unit, which includes the central shelf, side cabinets, and the wardrobe section.
  4. Integrate Side Storage: Attach the side storage units, which feature multiple shelves and the pull-out bedside tables.
  5. Mount to Wall: The bridge unit is designed to be fixed to the wall for stability and safety. Use appropriate wall anchors for your wall type (not included). This step is crucial to prevent tipping.
  6. Install LED Lighting: Carefully install the LED strip into the designated channel above the headboard. Connect the USB power cable.
  7. Final Checks: Once assembled, ensure all screws and fasteners are tight. Test all moving parts, such as drawers and sliding tables, for smooth operation.
Close-up of the VELONA Bridge Bed's side storage unit with a pull-out shelf acting as a bedside table.

Image 3.1: Detail of the sliding bedside table feature within the side storage niche.

Close-up of the VELONA Bridge Bed's LED lighting strip integrated above the headboard, emitting a warm glow.

Image 3.2: The integrated LED lighting strip, providing ambient illumination.

4. Operating Instructions

4.1. LED Lighting System

The VELONA Bridge Bed is equipped with multicolour LED lighting. The LEDs are controlled via a remote control and powered by a USB connection.

  • Power On/Off: Use the designated button on the remote control to turn the LEDs on or off.
  • Color Selection: Select your desired light color using the color palette buttons on the remote.
  • Brightness Adjustment: Adjust the brightness levels using the dimmer buttons.
  • Mode Selection: Cycle through various lighting modes (e.g., static, fade, flash) using the mode buttons.
  • USB Power: Ensure the USB cable is securely connected to a compatible USB power source (e.g., a wall adapter or power bank, not included).
The VELONA Bridge Bed with its LED lights illuminated, creating a warm and inviting atmosphere.

Image 4.1: The bed with LEDs activated, showcasing the ambient lighting effect.

4.2. Storage Features

The VELONA bed offers extensive storage options to maximize space in your room.

  • Under-Bed Drawers: Two spacious drawers are located beneath the bed structure for storing bedding, clothes, or other items. Pull them out gently using the handles.
  • Overhead Wardrobe: The bridge unit includes a wardrobe section with a hanging rail for clothes.
  • Shelves and Niches: Numerous shelves and open niches are available for displaying decorative items, books, or storing personal belongings.
  • Sliding Bedside Tables: The side storage units feature pull-out tablets that serve as convenient bedside tables. Gently pull them out when needed and push them back in to save space.
Close-up of the VELONA Bridge Bed's wardrobe section with clothes hanging on a rail.

Image 4.2: Detail of the integrated wardrobe with a pull-out hanging rail.

The VELONA Bridge Bed's overhead storage and side shelves, shown without a mattress.

Image 4.3: Overview of the bridge unit's storage compartments, including shelves and cabinets.

5. Maintenance

Proper care and maintenance will extend the lifespan of your VELONA Bridge Bed.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the melamine finish.
  • Dusting: Regularly dust all surfaces to prevent buildup.
  • Fastener Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary.
  • LED Care: Do not attempt to replace the LED strip yourself. If the LEDs malfunction, contact customer support.
  • Drawer Runners: If drawers become stiff, clean the runners and apply a silicone-based lubricant if needed.

6. Troubleshooting

ProblemPossible CauseSolution
LEDs do not light up.USB power not connected or faulty; remote control battery low; LED strip damaged.Ensure USB cable is securely connected to a working power source. Replace remote control battery. If problem persists, contact support.
Drawers are stiff or do not slide smoothly.Obstruction in runners; runners dirty; misaligned.Check for obstructions. Clean runners. Ensure drawers are correctly aligned on the runners.
Bed frame feels unstable or wobbly.Fasteners are loose; wall mounting not secure.Retighten all assembly screws. Ensure the bridge unit is securely fixed to the wall using appropriate anchors.
Sliding bedside tables are difficult to pull out.Obstruction; mechanism dirty.Check for any items blocking the mechanism. Clean the sliding tracks.

7. Product Specifications

FeatureDetail
BrandVente-unique
ModelVELONA
Sleeping Dimensions160 x 200 cm
Overall Dimensions (L x W x H)265.2 cm x 243 cm x 202.8 cm
MaterialEngineered Wood (Particle Board)
FinishMelamine
ColorNatural light, Black
LEDsMulticolour, USB powered, Remote controlled
Storage Type2 Drawers, 4 Niches, Sliding Tablets, Shelves, 1 Wardrobe
Number of Shelves9
Weight175 kg
Mattress/Box SpringNot included. Compatible with all 160x200 cm mattresses and box springs.
Assembly RequiredYes
Wall MountingRequired for bridge unit stability.

8. Warranty and Customer Support

Vente-unique is committed to customer satisfaction. For any questions regarding assembly, missing parts, or product defects, please contact Vente-unique customer service.

  • Contact Information: Please refer to the contact details provided with your purchase documentation or visit the official Vente-unique website for support.
  • Warranty: Information regarding product warranty is typically included with your purchase. Please retain your proof of purchase for warranty claims.
  • Online Resources: For additional information and support, you may visit the Vente-unique Brand Store on Amazon.

© 2023 Vente-unique. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.