1. Introduction
Thank you for choosing the LEDIARY Kosher Lamp for Shabbos. This lamp is designed to provide adjustable lighting without requiring the use of electrical switches, making it suitable for specific religious observances. It functions as both a table lamp and a nightlight, featuring a durable aluminum body and an included T10 LED bulb. This manual provides essential information for the safe and effective use of your lamp.
2. Safety Instructions
- This product is intended for indoor use only. Do not use outdoors or in wet environments.
- The lamp is not water resistant. Avoid contact with water or other liquids.
- Ensure the power outlet voltage matches the lamp's requirements (100-240V).
- Always unplug the lamp from the power outlet before cleaning or replacing the bulb.
- Do not attempt to modify or disassemble the lamp beyond bulb replacement. Refer all servicing to qualified personnel.
- Keep the lamp away from heat sources and direct sunlight.
3. Package Contents
Verify that all components are present upon opening the package:
- LEDIARY Kosher Lamp Body (Black)
- T10 LED Bulb (E26 base, 4W Eqv 40W, 400LM, 3000K)
- Power Cord with UL Certified Plug
Image: The LEDIARY Kosher Lamp body shown alongside the included T10 LED bulb, highlighting its specifications (3000K, 400LM, 4W=40W, 100-240V).
4. Setup Instructions
- Unpack Components: Carefully remove the lamp body, T10 LED bulb, and power cord from the packaging.
- Install Bulb: Gently screw the T10 LED bulb into the E26 medium-sized base located inside the lamp body. Ensure it is securely fastened but do not overtighten.
- Position Lamp: Place the lamp on a stable, flat surface in your desired indoor location.
- Connect to Power: Plug the power cord into a standard 100-240V AC electrical outlet.
Image: A breakdown of the lamp's key components, including the E26 medium base for the bulb, the durable aluminum body, the UL certified inline switch, and the UL certified power plug.
5. Operating Instructions
The LEDIARY Kosher Lamp is designed for ease of use, particularly for Shabbos observance, allowing light adjustment without direct interaction with an electrical switch.
- Initial Power On: Once plugged in, the lamp can be turned on or off using the inline switch on the power cord. For Shabbos use, this switch should be set to the 'on' position before Shabbos begins.
- Adjusting Brightness (Shabbos Mode): To adjust the light output, gently twist the top section of the lamp body. This rotary mechanism allows you to reveal or conceal the light source, effectively dimming or brightening the lamp from 0% (fully closed) to 100% (fully open) without operating an electrical switch.
- Nightlight Function: The lamp can be set to a low brightness level by partially twisting the top, providing a soft nightlight suitable for bedrooms or living rooms.
Image: A visual guide demonstrating how twisting the top of the lamp adjusts the light intensity from 10% to 50% to 100% illumination, ideal for Shabbos use.
Image: The lamp positioned on a bedside table, emitting a warm glow, illustrating its use as a nightlight or ambient light source in a bedroom.
6. Maintenance
- Cleaning: Ensure the lamp is unplugged before cleaning. Wipe the lamp body with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as this can damage the finish or electrical components.
- Bulb Replacement: The lamp uses a replaceable T10 LED bulb with an E26 medium-sized base. If the bulb needs replacement, ensure the lamp is unplugged and cool to the touch. Unscrew the old bulb and screw in a new T10 LED bulb of similar specifications (4W Eqv 40W, 400LM, 3000K, 100-240V).
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet. Power cord not fully plugged in. Inline switch is off. Bulb is loose or faulty. | Check the power outlet with another device. Ensure the power cord is securely plugged into both the lamp and the outlet. Verify the inline switch is in the 'on' position. Unplug the lamp, check if the bulb is screwed in tightly. Replace bulb if necessary. |
| Light flickers or is dim. | Bulb is loose or nearing end of life. Lamp's twisting mechanism is partially closed. | Unplug the lamp, check if the bulb is screwed in tightly. Replace bulb if necessary. Twist the top of the lamp to fully open the light source. |
| Lamp body feels hot. | Normal operation (LEDs generate some heat). Improper ventilation. | Minor warmth is normal. Ensure the lamp is placed in an area with adequate airflow and not covered. If excessively hot, unplug immediately and contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | kosher lamp |
| Dimensions (D x W x H) | 3.2" x 3.2" x 10.5" |
| Material | Aluminum (Body), Metal |
| Finish Type | Matte |
| Color | Black |
| Light Source Type | LED |
| Bulb Type | T10 LED (Included) |
| Bulb Base | E26 Medium Base |
| Bulb Wattage | 4W (Equivalent to 40W incandescent) |
| Luminous Flux | 400 Lumens (LM) |
| Color Temperature | 3000 Kelvin (K) - Warm White |
| Power Source | Corded Electric |
| Voltage | 100-240V AC |
| Control Method | Twist/Rotary (for light adjustment), Inline Switch (for power) |
| Indoor/Outdoor Usage | Indoor Use Only |
| Water Resistance Level | Not Water Resistant |
Image: A visual representation of the lamp's dimensions, indicating a height of 10.5 inches and a diameter of 3.2 inches.
Image: A collage showing the lamp's versatility in different indoor environments, including a bedroom for sleeping, a living room for family activities, a desk for working, and a nursery for childcare.
9. Warranty and Support
Warranty: The LEDIARY Kosher Lamp comes with a manufacturer's warranty for 5 years from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Customer Support: For any questions, concerns, or technical assistance, please contact LEDIARY customer service. We are committed to providing prompt and effective solutions to ensure your satisfaction. Our team offers 24-hour online technical support.
Please refer to the contact information provided on the product packaging or the official LEDIARY website for support details.