Nillkin Magnetic Tablet Mount Instruction Manual for Model B0BMPJCKVR

Introduction

This manual provides comprehensive instructions for the Nillkin Magnetic Tablet Mount, Model B0BMPJCKVR. This product is designed to securely hold tablets and e-readers on various flat surfaces, offering hands-free viewing in locations such as bedrooms, kitchens, bathrooms, and vehicles. Please read these instructions carefully before installation and use to ensure proper function and safety.

Product Features

Universal Compatibility: Designed for most tablets and e-readers with screen sizes between 9-15 inches, including various iPad Pro, iPad Air, and iPad Mini generations. Not compatible with mobile phones or Samsung tablets (due to potential S Pen function interference).
Strong Magnetic Adsorption: Features 38 built-in quadruple magnet rings for a secure hold without signal interference. The magnet is covered in PU leather for device protection.
Automatic Attraction Design: Allows for easy attachment and detachment, ideal for watching videos, making video calls, or using as a magnetic holder in various settings.
Easy Installation: Utilizes strong adhesive for simple, stable installation on walls and other flat surfaces.
High-Quality Material: Constructed with 6 sturdy magnetic ring circles and scratch-proof, water-resistant PU leather.

Package Contents

The Nillkin Magnetic Tablet Mount package typically includes:

SnapHold (Wall-side magnetic sticker)
SnapLink (Tablet-side magnetic sticker)
Installation Guide (This manual)

Note: Specific contents may vary. Please check your product packaging.

Setup and Installation

Follow these steps for proper installation of your Nillkin Magnetic Tablet Mount.

Step 1: Prepare Your Tablet

Ensure the back surface of your tablet or tablet case is clean and dry.
Carefully peel off the protective film from the back of the SnapLink (tablet-side magnetic sticker).
Align the SnapLink centrally on the back of your tablet or tablet case. Press firmly for 30 seconds to ensure strong adhesion.

Nillkin SnapLink attached to the back of a tablet — Image: The SnapLink (tablet-side magnetic sticker) being applied to the back of a tablet. Ensure proper alignment for optimal performance.

Nillkin SnapLink being applied to an iPad — Image: A hand applying the SnapLink to the back of an iPad, ensuring it is centered over the Apple logo for a secure fit.

Nillkin SnapLink on a tablet with a protective film — Image: A clear protective film being applied to the back of an iPad before attaching the SnapLink, to prevent direct adhesion to the device.

Step 2: Prepare Your Mounting Surface

Choose a clean, flat, and smooth surface for mounting (e.g., wall, car dashboard, fridge). Avoid textured or porous surfaces.
Clean the chosen surface thoroughly and allow it to dry completely.
Peel off the protective film from the back of the SnapHold (wall-side magnetic sticker).
Press the SnapHold firmly onto the desired surface for 30 seconds.
Allow the adhesive to cure for at least 24 hours before attaching your tablet to ensure maximum strength.

Nillkin Magnetic Tablet Mount showing magnetic attraction — Image: A visual representation of the magnetic attraction between the tablet-side SnapLink and the wall-side SnapHold, demonstrating the secure connection.

Nillkin SnapHold being applied to a wall — Image: A hand pressing the SnapHold onto a clean wall surface, illustrating the simple adhesive installation process.

Nillkin SnapHold on a wall — Image: The SnapHold securely attached to a wall, ready to receive a tablet.

Video: This video demonstrates the correct way to apply the adhesive sticker to a surface, emphasizing not to stick it directly onto the SnapHold or the wall without proper preparation.

Operating Instructions

Once both the SnapLink and SnapHold are securely installed, using your Nillkin Magnetic Tablet Mount is simple.

Hold your tablet with the installed SnapLink close to the installed SnapHold on the wall.
The magnets will automatically attract, securely holding your tablet in place.
To remove, gently pull the tablet away from the SnapHold.
The mount allows for both horizontal and vertical orientation of your tablet.

Tablet mounted on a car headrest — Image: A tablet securely mounted on a car headrest, demonstrating a practical application of the magnetic mount for backseat entertainment.

Tablet mounted on a wall in a kitchen — Image: A tablet mounted on a kitchen wall, providing hands-free access to recipes or entertainment while cooking.

Tablet mounted on a wall next to a desk — Image: A tablet mounted vertically on a wall next to a desk, expanding screen real estate or providing easy access to information.

Video: This video demonstrates various uses of the Nillkin iPad Wall Mount, including in the kitchen, bathroom, and bedroom, highlighting its versatility and ease of use.

Video: This video showcases the Nillkin Magnetic Tablet Mount in different home environments, such as a bedroom and kitchen, emphasizing its convenience for hands-free tablet use.

Video: A short demonstration of the Nillkin Tablet Wall Mount, showing how a tablet can be easily attached and detached from a wall-mounted magnetic holder.

Maintenance

To ensure the longevity and optimal performance of your Nillkin Magnetic Tablet Mount, follow these maintenance guidelines:

Cleaning: Wipe the PU leather surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
Adhesive Care: The adhesive is designed for strong, long-lasting hold. Avoid repeatedly removing and re-sticking the SnapHold or SnapLink, as this can weaken the adhesive.
Magnetic Surface: Keep the magnetic surfaces free from dust and debris to ensure a strong connection.
Temperature: Avoid exposing the mount to extreme temperatures, which could affect the adhesive or material integrity.

Troubleshooting

If you encounter any issues with your Nillkin Magnetic Tablet Mount, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Tablet does not stick securely.	Adhesive not fully cured. Surface is not clean or smooth. Tablet is too heavy or outside recommended size. SnapLink/SnapHold misaligned.	Allow 24 hours for adhesive to cure after installation. Ensure mounting surface is clean, dry, and smooth. Verify tablet size is within 9-15 inches. Re-apply SnapLink/SnapHold ensuring central alignment.
Adhesive peels off the surface.	Surface not properly cleaned or prepared. Surface material is unsuitable (e.g., textured, porous, satin paint). Excessive weight or force applied.	Ensure surface is clean, dry, and smooth before application. Use on recommended surfaces only. Avoid hanging excessively heavy items or applying strong pulling force.
Magnetic interference with Samsung S Pen.	Inherent magnetic properties of the mount.	This product is not recommended for Samsung tablets due to potential interference with S Pen functionality.

Specifications

Feature	Detail
Brand	Nillkin
Model Number	B0BMPJCKVR
Item Weight	4.6 ounces
Color	Black
Form Factor	Ring
Special Features	Hands-Free, Heat Resistant, Lightweight, Magnetic Wall Mount
SnapHold Size (Wall)	97975.2 mm
SnapLink Size (Tablet)	97973.4 mm

Compatibility

The Nillkin Magnetic Tablet Mount is compatible with a wide range of tablets and e-readers. It is designed for devices with screen sizes between 9 and 15 inches.

Compatible Devices Include:

iPad Pro 13 inch M5/M4
iPad Pro 11 inch M4
iPad Air M2 and M3
iPad 10th/9th/8th/7th/6th/5th/4th/3rd/2nd/1st Generation
iPad Pro 12.9 (2016/2017/2018/2019/2020/2021/2022 models)
iPad Mini
iPad Air 3/4/5
Microsoft Surface tablets
Most e-Book Readers

Important Compatibility Notes:

Not Compatible with Mobile Phones: This mount is specifically designed for tablets and e-readers, not smartphones.
Samsung Tablets: Not recommended for Samsung tablets, as the magnetic field may interfere with the functionality of the Samsung S Pen.
Case Friendly: The design is case-friendly, but ensure the tablet case is not excessively thick (ideally less than 2mm) to maintain optimal magnetic connection.

Nillkin Magnetic Tablet Mount compatibility chart — Image: A diagram illustrating the universal compatibility of the Nillkin Magnetic Tablet Mount with various tablets and e-readers, while explicitly stating it is not for mobile phones.

Nillkin Magnetic Tablet Mount with various compatible devices — Image: A visual guide showing the Nillkin Magnetic Tablet Mount's compatibility with different iPad models, e-readers, and other devices, noting its unsuitability for Samsung tablets with S Pen.

Safety Information

Please observe the following safety precautions to prevent damage to the product or your devices, and to ensure user safety:

Secure Installation: Always ensure both the SnapLink and SnapHold are firmly attached and the adhesive has fully cured (24 hours) before mounting your tablet.
Surface Selection: Only apply the SnapHold to clean, dry, and smooth surfaces. Avoid wallpaper, painted walls with satin finish, or other delicate/textured surfaces that may not provide adequate adhesion.
Weight Limit: Do not exceed the recommended weight for the mount. This product is designed for tablets and e-readers within the specified size range (9-15 inches).
Magnetic Fields: Keep the magnetic mount away from sensitive electronic devices, credit cards, pacemakers, or other items that may be affected by strong magnetic fields.
Children: Keep small components out of reach of children to prevent choking hazards.
Heat: Avoid installing the mount in areas exposed to extreme heat, as this can degrade the adhesive.

Warranty and Support

Warranty information for the Nillkin Magnetic Tablet Mount is not explicitly provided in the product details. For specific warranty terms, return policies, or technical support, please refer to the seller's information on the purchase platform or contact Nillkin customer service directly.

You can visit the official Nillkin store for more products and support: Nillkin Official Store

	Nillkin Camshield Pro Keyboard Case User Guide for iPad Pro 11 & iPad Air 10.9 This user guide provides comprehensive information on the Nillkin Camshield Pro keyboard case for iPad Pro 11-inch and iPad Air 10.9-inch. It covers product features, multi-touch gestures, iPadOS shortcut keys, frequently asked questions, troubleshooting tips, and detailed product specifications.
	Nillkin Keyboard Case for iPad 10.2" - User Manual and Features Comprehensive user manual for the Nillkin Keyboard Case for iPad 10.2". Learn about product features, specifications, operation, troubleshooting, and battery care.
	Nillkin iPad Keyboard Case with Keyboard User Manual User manual for the Nillkin iPad Keyboard Case with Keyboard, detailing product introduction, specifications, indicator lights, connection steps, energy saving, charging, shortcut keys, touch panel gestures, troubleshooting, and important notes.
	NILLKIN SXJ129 Keyboard Case User Manual Comprehensive user manual for the NILLKIN SXJ129 Keyboard Case, covering product introduction, detailed specifications, indicator light descriptions, Bluetooth connection steps, energy-saving features, charging methods, keyboard shortcuts, touch panel gestures, Samsung keyboard integration, and troubleshooting tips.
	Nillkin Bullet Wireless Speaker - Features, Specifications, and Company Information Detailed information about the Nillkin Bullet Wireless Speaker, including its features, technical specifications, accessories, and manufacturer details. Discover its compact design, long battery life, and audio capabilities.
	Nillkin Camshield Pro Keyboard Case for iPad Pro 12.9 User Guide Official user guide for the Nillkin Camshield Pro Keyboard Case for iPad Pro 12.9 inch (6th, 5th, 4th, 3rd Gen). Learn about features, setup, FAQs, and specifications for this protective keyboard case.

Nillkin B0BMPJCKVR

Nillkin Magnetic Tablet Mount Instruction Manual