BRPOM Car Jump Starter User Manual

Introduction

Thank you for choosing the BRPOM Car Jump Starter. This powerful and versatile device is designed to jump-start your vehicle, charge your electronic devices, and provide emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal operation.

Product Overview

The BRPOM Car Jump Starter is a compact and robust portable power solution. It features a high-capacity battery, intelligent jump cables, and multiple safety protections.

Package Contents:

• BRPOM Car Jump Starter Unit
• Smart Jump Cables (Red and Black clamps)
• USB-C Charging Cable
• Zippered Carrying Case
• User Manual (this document)

Key Features

• Powerful Jump Starting: 2000A Peak Current, 21800mAh capacity. Capable of jump-starting up to 8.0L Gas or 6.5L Diesel engines.
• Multi-functional Power Bank: Equipped with Quick Charge 3.0 output (5V/9V/12V) to rapidly charge smartphones, tablets, and other USB-powered devices.
• Advanced Safety Protections: Features spark-proof technology, auto detection, and hyper-safe protections including reverse charge, reverse connection, short circuit, over temperature, over charge, over current, over discharge, and reverse polarity protection.
• Emergency LED Light: Integrated LED flashlight with 4 modes: Lighting, Strobe, SOS, and Warning.
• Emergency Hammer/Window Breaker: A built-in tool for emergency situations.
• Long Standby Time: Can hold a charge for up to 18 months.

Setup

Charging the Jump Starter:

Before first use, fully charge the jump starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not used.

1. Connect the provided USB-C charging cable to the jump starter's input port.
2. Connect the other end of the USB-C cable to a 5V/2A or higher USB wall adapter (not included).
3. The indicator lights on the jump starter will illuminate to show charging progress. All lights will be solid when fully charged.

Operating Instructions

Jump Starting a Vehicle:

Ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

1. Turn off your vehicle's ignition and all accessories (lights, radio, A/C).
2. Connect the red (+) clamp of the smart jump cables to the positive (+) terminal of your vehicle's battery.
3. Connect the black (-) clamp of the smart jump cables to the negative (-) terminal of your vehicle's battery.
4. Plug the blue connector end of the smart jump cables into the jump starter's output port. Ensure a secure connection.
5. Once connected, the indicator light on the smart cable will turn solid green, indicating it's safe to proceed. If it flashes or turns red, refer to the troubleshooting section.
6. Start your vehicle's engine.
7. Once the engine starts, immediately remove the smart jump cable from the jump starter, then disconnect the black (-) clamp, followed by the red (+) clamp from the vehicle battery.

Note: Do not crank the engine for more than 3 seconds. If the engine does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive jump starts.

Charging Electronic Devices:

The jump starter can act as a portable power bank for your USB-powered devices.

1. Connect your device's USB charging cable to one of the USB output ports on the jump starter.
2. The jump starter will automatically begin charging your device.

Using the Emergency LED Light:

The integrated LED light has multiple modes for various situations.

1. Press and hold the power button for 3 seconds to turn on the LED light (Lighting mode).
2. Press the power button once to cycle through modes: Strobe → SOS → Warning.
3. Press and hold the power button again for 3 seconds to turn off the LED light.

Maintenance

• Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures.
• Recharge the unit every 3-6 months to prolong battery life, even if not in use.
• Clean the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Keep the smart clamps clean and free of corrosion.

Troubleshooting

Specifications

Safety Information

Please observe the following safety precautions to prevent injury or damage to the device:

• Do not disassemble the unit.
• Do not expose the unit to water or extreme temperatures.
• Do not use the unit if the cables or clamps are damaged.
• Keep out of reach of children.
• Ensure proper ventilation during use and charging.
• Do not jump-start vehicles with severely damaged or frozen batteries.
• Always connect the clamps to the correct battery terminals (red to positive, black to negative).

Warranty and Support

BRPOM products come with a standard manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included in your package or visit the official BRPOM website. Please have your model number (BM200) and purchase information ready when contacting support.

For further assistance, you may contact BRPOM customer service via their official channels.