Introduction
The Feit Electric SHOP2/840/50/MOT/BAT 2 ft. rechargeable battery LED shop light is designed to provide efficient and versatile illumination for various residential and commercial environments. This fixture features high-efficiency LEDs, an integrated rechargeable battery, and a built-in motion sensor for enhanced convenience and energy savings. Its lightweight design allows for flexible installation using either magnetic or flush mount options.
Image: The Feit Electric 2ft Rechargeable LED Shop Light, showcasing its sleek, elongated design with LED strips visible.
Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other injuries.
- Ensure the power source is disconnected before any installation, cleaning, or maintenance.
- Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
- Keep the light away from water and other liquids. This product is designed for indoor use only.
- Do not stare directly into the LED light source when the light is on, as this may cause eye strain or damage.
- Dispose of the battery according to local regulations. Do not incinerate.
Package Contents
Verify that all components are present before beginning installation.
- 1 pc. Feit Electric 2ft Rechargeable LED Shop Light
- 2 Magnetic Mount Brackets
- Mounting Screws and Wall Anchors
- Safety Cables (if included for hanging)
Image: A collection of hardware components including magnetic brackets, screws, wall anchors, and safety cables, indicating what is included for installation.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SHOP2/840/50/MOT/BAT |
| Light Output | 1000 Lumens (High), 300 Lumens (Low) |
| Power Consumption | 7.5 Watts |
| Color Temperature | 4000K Cool White |
| Battery Capacity | 50 Watt-Hours (Wh) |
| Battery Runtime | Up to 6 hours (High), Up to 20 hours (Low) |
| Motion Sensor Range | Up to 8 feet |
| Motion Sensor Auto-Off | 1 minute after no motion detected |
| Dimensions (L x W x H) | 23.6" x 1.4" x 1.6" |
| Weight | 1.3 Pounds |
| Material | Aluminum |
| Installation Type | Magnetic Mount, Flush Mount |
Image: A graphic illustrating the dimensions (23.6 inches length, 1.4 inches width, 1.6 inches height) and key features such as 1000 lumens brightness, magnetic mount, 50Wh rechargeable battery, and built-in motion sensor.
Setup and Installation
The Feit Electric LED Shop Light offers two primary installation methods: magnetic and flush mount.
Magnetic Installation:
- Identify a suitable metal surface (e.g., metal shelving, toolbox, or garage door) where you wish to mount the light.
- Ensure the surface is clean and free of debris.
- Attach the two included magnetic mount brackets to the desired location. The strong magnets will hold them in place.
- Align the light fixture with the brackets and snap it into place. The magnetic brackets allow for quick removal for recharging.
Flush Mount Installation:
- Choose a desired mounting location on a wall or ceiling.
- Mark the positions for the mounting screws using the light fixture or brackets as a template. Ensure the marks are level and spaced correctly.
- Drill pilot holes at the marked locations. If mounting into drywall, insert the provided wall anchors.
- Secure the mounting brackets to the surface using the provided screws.
- Attach the light fixture to the secured brackets.
Image: A visual comparison showing the two installation methods: Flush Installation using a screw directly into the surface, and Magnetic Installation using a magnetic bracket.
Operating Instructions
Charging the Battery:
The integrated 50Wh battery provides cordless operation. To charge the light, connect it to a standard power outlet using the provided charging cable. The charging indicator light will show the charging status. A full charge can provide up to 6 hours of light on high setting or up to 20 hours on low setting.
Image: A graphic highlighting the rechargeable battery feature, stating that the integrated 50Wh battery keeps the light shining for up to 6 hours without power, and noting its energy efficiency with an estimated energy cost of $0.9 per year.
Motion Sensor Operation:
The shop light is equipped with a built-in motion sensor for automatic operation. When motion is detected within approximately 8 feet, the light will automatically turn on. If no motion is detected for 1 minute, the light will automatically turn off to conserve battery life.
Image: A scene depicting the motion sensing capability, showing the light detecting motion up to 8 feet and turning off after 1 minute of inactivity.
Adjusting Brightness:
The light offers adjustable brightness settings. You can switch between a high setting (1000 lumens) for maximum illumination and a low setting (300 lumens) to extend battery life. Refer to the product's physical controls for brightness adjustment, typically a switch or button on the fixture.
Image: A side-by-side comparison showing the difference between a bright mode for detailed work and a lower setting for battery saving, illustrating the adjustable brightness feature.
Image: A man working on a car engine, illuminated by the bright, even light from the shop light, demonstrating its powerful 1000 lumen illumination for safety and visibility.
Maintenance
To ensure optimal performance and longevity of your Feit Electric LED Shop Light, follow these simple maintenance guidelines:
- Cleaning: Disconnect the light from any power source before cleaning. Use a soft, dry cloth to wipe down the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Battery Care: For best battery life, avoid fully discharging the battery frequently. Recharge the light when the brightness noticeably diminishes. If storing the light for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months.
- Inspection: Periodically inspect the light fixture and its mounting hardware for any signs of damage, wear, or loose connections. Address any issues promptly.
Troubleshooting
If you encounter issues with your Feit Electric LED Shop Light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Charge the light using the provided charging cable. |
| Light turns off too quickly. | Motion sensor not detecting continuous motion. | Ensure there is sufficient movement within the sensor's range. Check for obstructions. |
| Light flickers or is dim. | Low battery. | Recharge the light. |
| Motion sensor is not working. | Sensor obstructed or dirty. | Clean the sensor lens. Ensure no objects are blocking the sensor's view. |
Warranty and Support
Feit Electric provides a 1-year manufacturer warranty for this product from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact Feit Electric customer service. Keep your proof of purchase for warranty validation.
For more information, visit the official Feit Electric website or refer to the contact details provided in your product packaging.
