1. Introduction
Thank you for choosing the Lindby Lanira LED Ceiling Light. This modern ceiling lamp combines natural oak wood with a white acrylic diffuser, offering a versatile lighting solution for your home. Featuring an integrated CCT (Correlated Color Temperature) function and dimming capabilities, controlled by a convenient remote, this light allows you to customize your ambiance from warm white to daylight. This manual provides essential information for safe installation, operation, and maintenance of your new ceiling light.
Image 1: Lindby Lanira LED Ceiling Light illuminated in a modern living space.
2. Safety Instructions
- Read all instructions carefully before installation and use. Keep this manual for future reference.
- Electrical installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Always disconnect the main power supply at the fuse box or circuit breaker before attempting any installation, maintenance, or cleaning.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or direct water.
- Ensure the mounting surface can safely support the weight of the fixture.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- The integrated LED light source is not user-replaceable. Do not attempt to open the LED module.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged:
- Lindby Lanira LED Ceiling Light fixture
- Remote Control
- Integrated LED light source (pre-installed)
- Mounting hardware (screws, wall plugs)
- User Manual
4. Setup and Installation
Professional installation by a qualified electrician is strongly recommended.
- Turn off power: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker or fuse box.
- Prepare mounting surface: Determine the desired location for the ceiling light. Use the mounting bracket (usually located on the back of the lamp) as a template to mark drilling points on the ceiling.
- Drill holes: Drill holes at the marked positions and insert appropriate wall plugs (if necessary).
- Attach mounting bracket: Secure the mounting bracket to the ceiling using the provided screws.
- Connect wiring: Carefully connect the household electrical wires to the terminal block on the lamp. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Refer to the internal wiring image for guidance.
Image 2: Internal LED strips and wiring connections.
- Mount the lamp: Carefully lift the lamp and attach it to the mounting bracket, securing it with the screws or locking mechanism. Ensure the lamp is firmly fixed to the ceiling.
- Restore power: Once the lamp is securely installed, restore power at the circuit breaker.
- Test: Use the remote control to test the light's functions.
Image 3: Dimensions of the Lindby Lanira LED Ceiling Light.
5. Operating Instructions
The Lindby Lanira LED Ceiling Light is operated using the included remote control.
Image 4: Remote control for the Lindby Lanira LED Ceiling Light.
Remote Control Functions:
- ON/OFF: Press the 'ON' button to turn the light on, and 'OFF' to turn it off.
- Dimming (LMI): Use the 'LMI' (Luminous Intensity) buttons to increase or decrease the brightness of the light.
- CCT Adjustment: The 'CCT' (Correlated Color Temperature) buttons allow you to change the light color. Cycle through different color temperatures, typically from warm white (e.g., 3000K) to neutral white and daylight (e.g., 6500K).
Image 5: Lindby Lanira LED Ceiling Light demonstrating various color temperatures.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the lamp with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or acrylic diffuser.
- LEDs: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Remote Control: Replace the remote control battery when its performance diminishes. Refer to the remote control's battery compartment for battery type and replacement instructions.
7. Troubleshooting
If you encounter issues with your Lindby Lanira LED Ceiling Light, please refer to the following common problems and solutions:
- Light does not turn on:
- Check if the main power supply is switched on.
- Ensure the remote control battery is not depleted.
- Verify that the wiring connections are secure and correct.
- Remote control is not working:
- Replace the remote control battery.
- Ensure there are no obstructions between the remote control and the lamp.
- Make sure you are within the effective range of the remote control.
- Light flickers or dims unexpectedly:
- Check for loose wiring connections.
- Ensure the power supply is stable.
If these steps do not resolve the issue, please contact customer support.
8. Specifications
| Model Name | Lanira |
| Model Number | 9627825 |
| Brand | Lindby |
| Product Dimensions | 60L x 60W x 10H cm (Diameter 600mm, Height 100mm) |
| Material | Oak wood, Acrylic |
| Light Source | Integrated LED |
| Wattage | 46 Watts |
| Luminous Flux | 2340 Lumens (Max) |
| Color Temperature | 3000K (Warm White) - Color Change to Daylight (CCT Function) |
| Voltage | 230 Volts |
| IP Rating | IP20 (Indoor use only) |
| Protection Class | II |
| Control Method | Remote Control |
| Energy Efficiency Class | E |
| EPREL Product Page | View EPREL Data |
Image 6: Energy Efficiency Label.
9. Warranty and Support
This Lindby product comes with a manufacturer's warranty. Please refer to the terms and conditions provided at the time of purchase or contact your retailer for specific warranty details.
For technical support, troubleshooting assistance, or inquiries regarding your product, please contact Lindby customer service or your point of purchase. Have your model number (9627825) and purchase information ready when contacting support.