SCULPFUN S30 Laser Engraver
Contents
SCULPFUN S30 Laser Engraver User Manual
Model: S30 Engraver
1. Introduction
The SCULPFUN S30 Laser Engraver is a high-precision laser engraving and cutting machine designed for DIY enthusiasts and professionals. It features an automatically controlled air assist system, a high-pressure air assist nozzle, and an ultra-thin linear rail for superior accuracy. This manual provides essential information for setting up, operating, and maintaining your S30 engraver.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved and cut samples.
2. Safety Information
WARNING: This product is a Laser Class 4 device. Always wear appropriate laser safety goggles to protect your eyes from direct or scattered laser radiation. Never look directly into the laser beam. Ensure the laser protection cover is properly positioned during operation. Operate the machine in a well-ventilated area to dissipate fumes from engraving/cutting materials. Keep children and pets away from the operating area.
3. Setup Guide
3.1 Assembly
Follow the detailed assembly instructions provided in the separate assembly guide included with your package. Ensure all components are securely fastened before proceeding.
3.2 Air Assist System Connection
The S30 features an automatically controlled air assist system. Connect the air hose from the air pump to the high-pressure air-assisted metal nozzle on the laser module. The air pump is controlled by the 32-bit motherboard.

Figure 2: The automatic air pump included in the package, designed for steady airflow.

Figure 3: Illustration of the automatic air assist system, showing how it intelligently controls airflow during engraving and cutting.
3.3 Software Installation and Connectivity
Install the recommended operating software such as LightBurn or LaserGRBL on your computer. The S30 supports both Windows and MAC systems. Data transmission can be done via USB connection or Bluetooth wireless connection (upgrade kit sold separately for Bluetooth functionality).

Figure 4: The 32-bit air-assisted motherboard, supporting automatic air assist control and reserving Bluetooth/SD card offline printing functions.
4. Operating Instructions
4.1 Laser Focusing
The S30 uses a fixed focus column and sliding device for focusing. Refer to the detailed focusing procedure in your assembly guide to ensure optimal laser performance. The laser focus is ultra-thin, at 0.06 x 0.06mm, for high precision.

Figure 5: Diagram illustrating the high density and sharp laser beam, highlighting the ultra-thin laser focus.
4.2 Engraving and Cutting Materials
The S30 is capable of engraving and cutting a wide range of materials:
- Engraving Materials: All kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone.
- Cutting Materials: All kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards.

Figure 6: Comparison of one-pass cutting depths for S30 (5W), S30 Pro (10W), and S30 Pro Max (20W) models on balsa wood and plywood.
4.3 Using Automatic Air Assist
Utilize the LightBurn software's M8 button to intelligently control the air-assist switch. This allows for clean engraving and cutting by turning the air assist ON or OFF as needed, preventing smoke from obscuring engraved patterns and ensuring smooth cut surfaces.

Figure 7: Illustrates the benefits of automatic air assist, showing cleaner edges compared to manual air assist during engraving and cutting.
4.4 Precision and Speed
The S30 features a 0.005mm industrial linear guide, significantly improving engraving accuracy and eliminating wavy patterns often seen in ordinary engraving machines. This industrial-grade precision ensures high-quality results.

Figure 8: Demonstrates the high precision of the S30's linear rail, showing a test pattern with no wavy lines, unlike other machines.
4.5 Expandable Engraving Area
The standard engraving area is 410x400mm. For larger projects, you can purchase a Y-axis or XY-axis expansion kit to extend the engraving area to 935x400mm or 935x905mm, respectively.

Figure 9: Overview of S30 series innovative technologies, highlighting the X&Y axis expansion kit for increased working area.
4.6 Official Product Video
Video 1: An official product video showcasing the SCULPFUN S30 Series, highlighting its features and capabilities in various engraving and cutting tasks.
5. Maintenance
5.1 General Cleaning
Regularly clean the machine, especially the linear rails and laser module, to ensure smooth operation and prevent dust or debris buildup. Use a soft, dry cloth. Avoid using abrasive cleaners.
5.2 Replaceable Lens
The S30 laser module features an innovative replaceable lens design. This significantly extends the laser's lifespan. If the lens becomes worn or damaged, it can be easily replaced. Refer to the specific instructions for lens replacement in your detailed product guide.

Figure 10: Overview of S30 series innovative technologies, highlighting the replaceable lens feature.
6. Troubleshooting
If you encounter any issues with your SCULPFUN S30 Laser Engraver, please refer to the troubleshooting section of the comprehensive user manual provided with your product. Common issues may include connectivity problems, laser focusing difficulties, or material compatibility. For persistent issues, contact SCULPFUN customer support.
7. Specifications
| Category | Specification |
|---|---|
| Product Model | SCULPFUN S30 |
| Output Laser Power | 5000mW |
| Laser Class | 4 |
| Laser Focus | 0.06 x 0.06mm |
| Laser Wavelength | 455±5nm |
| Focusing Method | Fixed focus column + sliding device |
| Laser Protection Cover | Detachable, adjustable |
| Engraving Accuracy | 0.005mm |
| Engraving Area Size (Standard) | 410*400mm |
| Expandable Engraving Area | Up to 935x400mm or 935x905mm (with expansion kit) |
| Machine Power | About 60W |
| Air Pump Type | Mainboard-controlled, 12V, 30L/min flow |
| Air Hose Inner Diameter | 7.5mm |
| Motherboard | 32-bit air-assisted, reserves Bluetooth, SD card offline printing (upgrade kit sold separately) |
| Operating Software | LightBurn (with air assist function M8), LaserGRBL, Benbox, GrblController, LiteFire |
| Supported File Formats | NC, BMP, JPG, PNG, DXF and other image formats |
| Data Transmission Method | USB connection or Bluetooth wireless connection |
| Power Input | 100-240V AC, 50/60HZ |
| Power Output | 12V 5A |
| Packing Weight | 6.7kg (14.77 lbs) |
| Packing Size | 62.3*24*22.5cm (24.52 x 9.45 x 8.86 inches) |
8. Warranty and Support
For warranty information, technical support, or to purchase accessories and expansion kits, please visit the official SCULPFUN website or contact their customer service directly. Retain your proof of purchase for warranty claims.
Manufacturer: SCULPFUN, Co, Ltd
Country of Origin: China
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.