JANOEL JN24
Contents
JANOEL Automatic 24-30 Egg Incubator User Manual
Model: JN24
Introduction
Thank you for choosing the JANOEL Automatic Egg Incubator. This high-quality incubator is designed to provide optimal conditions for hatching various poultry eggs, including chicken, duck, goose, quail, and pigeon eggs. With its advanced features like automatic egg turning, precise temperature control, and an intuitive LED display, it simplifies the hatching process for both beginners and experienced users. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure a successful hatching experience.

Image: The JANOEL Automatic Egg Incubator, showcasing its transparent top and egg tray filled with eggs, with a small chick and an egg in the foreground.
Safety Information
- Always ensure the incubator is placed on a stable, level surface away from direct sunlight, drafts, or extreme temperature fluctuations.
- Do not immerse the electrical components of the incubator in water or any other liquid.
- Keep the incubator out of reach of children and pets.
- Use only the provided power cord and ensure it is properly connected to a suitable power outlet.
- Unplug the incubator from the power source before cleaning or performing any maintenance.
- Avoid opening the incubator frequently during the incubation period, as this can disrupt temperature and humidity levels.
Product Components
The JANOEL incubator comes with several key components designed for efficient and successful hatching:
- Incubator Unit: Main housing with transparent lid, control panel, and heating elements.
- Movable Egg Rack: Designed to hold various egg sizes and facilitate automatic turning.
- Mesh Tray: Used during the hatching phase (lockdown) to provide a stable surface for chicks.
- Water Injector: For adding water to maintain humidity without opening the lid.
- Power Cable: To connect the incubator to an electrical outlet.

Image: A visual representation of the incubator's main components, including the incubator unit, movable egg rack, mesh tray, water injector, and power cable.
Setup Instructions
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect for any damage.
- Assemble Egg Rack: Place the movable egg rack inside the incubator base. Ensure the rotating rod is correctly inserted into the slot of the egg tray.
- Add Water: Using the provided water injector, add water to the designated water channels at the bottom of the incubator. Do not overfill. The amount of water needed will vary based on desired humidity levels and environmental conditions.
- Connect Power: Plug the power cable into the incubator and then into a suitable electrical outlet. The LED display will light up, showing the current temperature.
- Pre-heat: Allow the incubator to run for at least 2-4 hours (preferably 24 hours) before placing eggs inside. This allows the temperature and humidity to stabilize.

Image: A detailed view showing the proper insertion of the rotating rod into the egg tray slot, crucial for the automatic egg turning function.
Operating Instructions
Temperature Control
The incubator features an intuitive LED display that shows the internal temperature in Fahrenheit. The industrial-grade temperature probes ensure precise monitoring. The incubator is pre-set to an optimal hatching temperature, but it can be adjusted if necessary according to specific egg requirements.
- Monitoring: Continuously monitor the temperature on the LED screen.
- Adjustment: Refer to the specific instructions in the full product manual for detailed steps on adjusting temperature settings, if required.

Image: A close-up of the incubator's top panel, highlighting the LED display which shows the current temperature (e.g., 60.6°F) and the JANOEL brand label.
Automatic Egg Turning
The incubator is equipped with an automatic egg turning mechanism that rotates the eggs every two hours. This mimics the natural behavior of a mother hen, ensuring even heat distribution and preventing the embryo from sticking to the shell. This feature significantly enhances hatch rates and reduces manual intervention.
- Ensure the rotating rod is properly installed as per setup instructions.
- The turning mechanism will activate automatically once the incubator is powered on.
Humidity Management
Maintaining proper humidity is crucial for successful hatching. The incubator allows for humidity control by adding water to the designated channels. The specific humidity requirements vary by species and stage of incubation.
- Use the water injector to add water to the channels without opening the lid.
- Monitor humidity levels using a hygrometer (not included, but recommended for precise control).
- Adjust water levels as needed to achieve the desired humidity. More water increases humidity, less water decreases it.
Maintenance and Cleaning
Regular cleaning and maintenance are essential to ensure the longevity and hygienic operation of your incubator. Always unplug the unit before cleaning.
- Incubator Cover: Gently wipe the incubator cover with a damp cloth.
- Base and Trays: The base and trays can be soaked in warm water (around 40°C/104°F) for easier cleaning.
- Wiping: After soaking, wipe all surfaces with a damp cloth to remove any residue.
- Drying: Ensure all parts are completely dry or air-dry before reassembling or storing the incubator.
- Avoid: Do not use a dishwasher or irritating detergents, as these can damage the incubator materials.

Image: An infographic illustrating the cleaning process for the incubator, showing steps like wiping with a damp cloth, warm water soaking, and air drying, while advising against dishwashers and irritating detergents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Temperature Fluctuates | External drafts, frequent opening, faulty sensor. | Ensure stable environment. Avoid frequent opening. Contact support if sensor is suspected faulty. |
| Humidity Too Low | Insufficient water in channels, dry environment. | Add more water to the channels. Consider placing a small sponge in the water channels for increased surface area. |
| Humidity Too High | Too much water, humid environment. | Reduce water in channels. Ensure proper ventilation in the room. |
| Eggs Not Turning | Rotating rod not properly installed, motor issue. | Check if the rotating rod is correctly seated in the egg tray slot. If issue persists, contact customer support. |
| No Power/Display Off | Power cable loose, power outage, unit malfunction. | Check power cable connection and wall outlet. Verify power supply. If still off, contact support. |
Specifications
- Model: JN24
- Capacity: 24-30 Chicken Eggs (varies by egg size for duck, goose, quail, pigeon)
- Material: Durable ABS+PP (Polypropylene, Polyvinyl Chloride)
- Dimensions (LxWxH): Approximately 17.72" x 11.81" x 9.82"
- Item Weight: Approximately 9.63 pounds
- Temperature Control: Digital LED display (Fahrenheit) with industrial-grade probes
- Egg Turning: Automatic, every 2 hours
- Power Source: Standard electrical outlet (power cord included)
- Manufacturer: Yueqing Jianong Electronic Equipment Co., Ltd
- First Available: November 15, 2022

Image: A diagram showing the various dimensions of the incubator and its components, including length, width, and height measurements.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your JANOEL Automatic Egg Incubator, please refer to the contact details provided with your purchase documentation or visit the official JANOEL website. JANOEL has over 15 years of experience in manufacturing poultry farming equipment and is committed to quality and customer satisfaction.
You can also visit the JANOEL Store on Amazon for more information and product support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.